+ * libical/Makefile: autogenerated file removed from cvs.

+	* libical/configure: same.
+	* libical/config.status: same.
+	* libical/src/Makefile: same.
+	* libical/src/test/Makefile: same.

svn path=/trunk/; revision=1861

5 files changed, 0 insertions, 2040 deletions

diff --git a/libical/Makefile b/libical/Makefile
deleted file mode 100644
index 226637ac9e..0000000000
--- a/libical/Makefile
+++ /dev/null
@@ -1,61 +0,0 @@
-# Generated automatically from Makefile.in by configure.
-VERSION = 0.15
-DISTNAME = libical
-SUBDIRS = src
-
-prefix = /home/miguel
-PREFIX = ${prefix}
-EXEC_PREFIX = ${prefix}
-BIN_DIR = $(EXEC_PREFIX)/bin
-LIB_DIR = $(EXEC_PREFIX)/lib
-INCLUDE_DIR = $(PREFIX)/include   
-
-INSTALL        = /usr/bin/install -c
-INSTALL_DATA   = ${INSTALL} -m 644
-INSTALL_PROGRAM= ${INSTALL} -m 755       
-
-
-all:
-	for dir in $(SUBDIRS) ; do \
-	  (cd $$dir ; $(MAKE) $@) || exit 1; \
-	done
-
-depend:
-	for dir in $(SUBDIRS) ; do \
-	  (cd $$dir ; $(MAKE) $@) || exit 1; \
-	done
-
-clean:
-	-/bin/rm -rf $(DISTNAME)* config.log config.cache config.status
-	-/bin/rm *~
-	for dir in $(SUBDIRS) ; do \
-	  (cd $$dir ; $(MAKE) $@) || exit 1; \
-	done
-
-dist: clean
-	distname="$(DISTNAME)-$(VERSION)"; \
-	distfiles=`find . -name "$$distname" -prune -o -name "design" -prune -o -name "rfc*" -prune -o -name "comp-cc" -prune -o -name "RCS" -prune -o -print | sed 's/^\.\///' ` ;\
-	mkdir $$distname ; \
-	for file in $$distfiles; do \
-	  test -d $$file && mkdir $$distname/$$file; \
-          test -f $$file &&   { ln ./$$file $$distname/$$file \
-          || { echo copying $$file instead; cp -p $$file $$distname/$$file;};}; \
-        done; \
-	tar -czvf $$distname.tar.gz $$distname ; 
-
-
-install: 
-	@for i in $(LIB_DIR) $(INCLUDE_DIR) $(BIN_DIR);\
-	do \
-	  if [ ! -d $$i ] ; then \
-	         mkdir $$i; \
-	         echo "Making directory $$i"; \
-	         chmod 755 $$i;\
-	         else true; \
-	  fi; \
-	done;
-
-	for dir in $(SUBDIRS) ; do \
-	  (cd $$dir ; $(MAKE) $@) || exit 1; \
-	done	
-
diff --git a/libical/config.status b/libical/config.status
deleted file mode 100755
index c957041e8c..0000000000
--- a/libical/config.status
+++ /dev/null
@@ -1,166 +0,0 @@
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host papaya.nuclecu.unam.mx:
-#
-# ./configure  --prefix=/home/miguel --cache-file=.././config.cache --srcdir=.
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: ./config.status [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running ${CONFIG_SHELL-/bin/sh} ./configure  --prefix=/home/miguel --cache-file=.././config.cache --srcdir=. --no-create --no-recursion"
-    exec ${CONFIG_SHELL-/bin/sh} ./configure  --prefix=/home/miguel --cache-file=.././config.cache --srcdir=. --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "./config.status generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "$ac_cs_usage"; exit 0 ;;
-  *) echo "$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=.
-ac_given_INSTALL="/usr/bin/install -c"
-
-trap 'rm -fr src/libical/Makefile src/libicalss/Makefile src/test/Makefile src/Makefile Makefile conftest*; exit 1' 1 2 15
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\&%]/\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF
-/^[ 	]*VPATH[ 	]*=[^:]*$/d
-
-s%@SHELL@%/bin/sh%g
-s%@CFLAGS@%-g -O2%g
-s%@CPPFLAGS@%%g
-s%@CXXFLAGS@%%g
-s%@FFLAGS@%%g
-s%@DEFS@% -DSTDC_HEADERS=1 -DHAVE_MALLOC_H=1 -DHAVE_UNISTD_H=1 -DHAVE_TIME_H=1 -DHAVE_STDIO_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_ASSERT_H=1 -DHAVE_STRDUP=1 %g
-s%@LDFLAGS@%%g
-s%@LIBS@%%g
-s%@exec_prefix@%${prefix}%g
-s%@prefix@%/home/miguel%g
-s%@program_transform_name@%s,x,x,%g
-s%@bindir@%${exec_prefix}/bin%g
-s%@sbindir@%${exec_prefix}/sbin%g
-s%@libexecdir@%${exec_prefix}/libexec%g
-s%@datadir@%${prefix}/share%g
-s%@sysconfdir@%${prefix}/etc%g
-s%@sharedstatedir@%${prefix}/com%g
-s%@localstatedir@%${prefix}/var%g
-s%@libdir@%${exec_prefix}/lib%g
-s%@includedir@%${prefix}/include%g
-s%@oldincludedir@%/usr/include%g
-s%@infodir@%${prefix}/info%g
-s%@mandir@%${prefix}/man%g
-s%@YACC@%bison -y%g
-s%@CC@%gcc%g
-s%@LEX@%flex%g
-s%@LEXLIB@%-lfl%g
-s%@LN_S@%ln -s%g
-s%@RANLIB@%ranlib%g
-s%@INSTALL_PROGRAM@%${INSTALL}%g
-s%@INSTALL_SCRIPT@%${INSTALL_PROGRAM}%g
-s%@INSTALL_DATA@%${INSTALL} -m 644%g
-s%@AR@%ar%g
-s%@CPP@%gcc -E%g
-
-CEOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-
-CONFIG_FILES=${CONFIG_FILES-"src/libical/Makefile src/libicalss/Makefile src/test/Makefile src/Makefile Makefile"}
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-
-
-exit 0
diff --git a/libical/configure b/libical/configure
deleted file mode 100755
index b810e135d3..0000000000
--- a/libical/configure
+++ /dev/null
@@ -1,1767 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=src/libical/ical.h
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-for ac_prog in 'bison -y' byacc
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:531: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$YACC"; then
-  ac_cv_prog_YACC="$YACC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_YACC="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-YACC="$ac_cv_prog_YACC"
-if test -n "$YACC"; then
-  echo "$ac_t""$YACC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YACC" && break
-done
-test -n "$YACC" || YACC="yacc"
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:564: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:594: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:645: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:677: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 688 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:693: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:719: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:724: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:752: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Extract the first word of "flex", so it can be a program name with args.
-set dummy flex; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:786: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$LEX"; then
-  ac_cv_prog_LEX="$LEX" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_LEX="flex"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
-fi
-fi
-LEX="$ac_cv_prog_LEX"
-if test -n "$LEX"; then
-  echo "$ac_t""$LEX" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$LEXLIB"
-then
-  case "$LEX" in
-  flex*) ac_lib=fl ;;
-  *) ac_lib=l ;;
-  esac
-  echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:820: checking for yywrap in -l$ac_lib" >&5
-ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-l$ac_lib  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 828 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char yywrap();
-
-int main() {
-yywrap()
-; return 0; }
-EOF
-if { (eval echo configure:839: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  LEXLIB="-l$ac_lib"
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-fi
-
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:862: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:885: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:943: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-
-for ac_prog in ar aal
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1002: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$AR" && break
-done
-test -n "$AR" || AR="ar"
-
-
-echo $ac_n "checking for main in -lical""... $ac_c" 1>&6
-echo "configure:1034: checking for main in -lical" >&5
-ac_lib_var=`echo ical'_'main | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-lical  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 1042 "configure"
-#include "confdefs.h"
-
-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:1049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_lib=HAVE_LIB`echo ical | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
-
-  LIBS="-lical $LIBS"
-
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1078: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    # This must be in double quotes, not single quotes, because CPP may get
-  # substituted into the Makefile and "${CC-cc}" will confuse make.
-  CPP="${CC-cc} -E"
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp.
-  cat > conftest.$ac_ext <<EOF
-#line 1093 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1099: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -E -traditional-cpp"
-  cat > conftest.$ac_ext <<EOF
-#line 1110 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1116: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -nologo -E"
-  cat > conftest.$ac_ext <<EOF
-#line 1127 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1133: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-  ac_cv_prog_CPP="$CPP"
-fi
-  CPP="$ac_cv_prog_CPP"
-else
-  ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1158: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1163 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1171: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  ac_cv_header_stdc=yes
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 1188 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "memchr" >/dev/null 2>&1; then
-  :
-else
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 1206 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "free" >/dev/null 2>&1; then
-  :
-else
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
-  :
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1227 "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
-
-EOF
-if { (eval echo configure:1238: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  :
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_header_stdc=no
-fi
-rm -fr conftest*
-fi
-
-fi
-fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
-  cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
-
-fi
-
-for ac_hdr in malloc.h unistd.h time.h stdio.h sys/types.h assert.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1265: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1270 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1275: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1303: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1308 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this.  */
-typedef int charset[2]; const charset x;
-/* SunOS 4.1.1 cc rejects this.  */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this.  */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
-   It does not let you subtract one const X* pointer from another in an arm
-   of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this.  */
-  char *t;
-  char const *s = 0 ? (char *) 0 : (char const *) 0;
-
-  *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
-  int x[] = {25, 17};
-  const int *foo = &x[0];
-  ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-  typedef const int *iptr;
-  iptr p = 0;
-  ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
-     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-  struct s { int j; const int *ap[3]; };
-  struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-  const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:1357: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_c_const=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_c_const=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_const" 1>&6
-if test $ac_cv_c_const = no; then
-  cat >> confdefs.h <<\EOF
-#define const 
-EOF
-
-fi
-
-echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1378: checking for size_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1383 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_type_size_t=yes
-else
-  rm -rf conftest*
-  ac_cv_type_size_t=no
-fi
-rm -f conftest*
-
-fi
-echo "$ac_t""$ac_cv_type_size_t" 1>&6
-if test $ac_cv_type_size_t = no; then
-  cat >> confdefs.h <<\EOF
-#define size_t unsigned
-EOF
-
-fi
-
-echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:1411: checking whether struct tm is in sys/time.h or time.h" >&5
-if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1416 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <time.h>
-int main() {
-struct tm *tp; tp->tm_sec;
-; return 0; }
-EOF
-if { (eval echo configure:1424: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_struct_tm=time.h
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_struct_tm=sys/time.h
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_struct_tm" 1>&6
-if test $ac_cv_struct_tm = sys/time.h; then
-  cat >> confdefs.h <<\EOF
-#define TM_IN_SYS_TIME 1
-EOF
-
-fi
-
-
-for ac_func in strdup
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1448: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1453 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func(); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
-
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "src/libical/Makefile src/libicalss/Makefile src/test/Makefile src/Makefile Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@YACC@%$YACC%g
-s%@CC@%$CC%g
-s%@LEX@%$LEX%g
-s%@LEXLIB@%$LEXLIB%g
-s%@LN_S@%$LN_S%g
-s%@RANLIB@%$RANLIB%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@AR@%$AR%g
-s%@CPP@%$CPP%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"src/libical/Makefile src/libicalss/Makefile src/test/Makefile src/Makefile Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/libical/src/Makefile b/libical/src/Makefile
deleted file mode 100644
index 8478bc24cc..0000000000
--- a/libical/src/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# Generated automatically from Makefile.in by configure.
-SUBDIRS = libical libicalss test
-
-all depend ci clean install:
-	for dir in $(SUBDIRS) ; do \
-	  (cd $$dir ; $(MAKE) $@) || exit 1; \
-	done
-
-
diff --git a/libical/src/test/Makefile b/libical/src/test/Makefile
deleted file mode 100644
index 29eeed08ee..0000000000
--- a/libical/src/test/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-# Generated automatically from Makefile.in by configure.
-INCLUDES = -I . -I../libical -I../libicalss
-CFLAGS =  -Wall -g  $(INCLUDES) 
-LIBS   =  -L../libical -L../libicalss -licalss -lical
-CC	= gcc
-LD	= ld
-
-all: usecases copycluster regression parser findobj
-
-parser: icaltestparser.o ../libical/libical.a ../libicalss/libicalss.a
-	$(CC) -o icalparser icaltestparser.o $(LIBS)
-
-copycluster: copycluster.o ../libical/libical.a ../libicalss/libicalss.a
-	$(CC)  -o copycluster copycluster.o $(INCLUDES)  $(LIBS)	
-
-findobj: findobj.o ../libical/libical.a ../libicalss/libicalss.a 
-	$(CC)  -o findobj findobj.o $(INCLUDES)  $(LIBS)	
-
-regression: regression.o ../libical/libical.a ../libicalss/libicalss.a
-	$(CC)  -o regression regression.o $(INCLUDES)  $(LIBS)	
-
-usecases: usecases.o ../libical/libical.a ../libicalss/libicalss.a
-	$(CC)  -o usecases usecases.o $(INCLUDES)  $(LIBS)	
-
-clean:
-	-/bin/rm -f *.o
-	-/bin/rm -f \#*
-	-/bin/rm -f *~ Makefile.bak icalitip.tab.h icalitip.tab.c lex.yy.c
-	-/bin/rm -rf icalparser core regression usecases copycluster findobj
-
-ci: clean
-	ci -u *.c *.h 
-
-depend:
-	@makedepend  -Y $(INCLUDES) $(SOURCES)
-
-install:
\ No newline at end of file