diff options
Diffstat (limited to 'calendar/ChangeLog')
| -rw-r--r-- | calendar/ChangeLog | 2268 |
1 files changed, 0 insertions, 2268 deletions
diff --git a/calendar/ChangeLog b/calendar/ChangeLog deleted file mode 100644 index c5156c15e3..0000000000 --- a/calendar/ChangeLog +++ /dev/null @@ -1,2268 +0,0 @@ -1999-11-14 Eskil Heyn Olsen <deity@eskil.dk> - - * Makefile.am: Stupid misplaced endif cause gncal to depend on an - install gnome-pilot... fixed... sorry. - -1999-11-12 Eskil Heyn Olsen <deity@eskil.dk> - - * Makefile.am (extra_pilot_bins): Fixed the if then else problem, - using solution suggested by James Henstridge, appears to be caused - by a (by now fixed) bug in my automake. - -1999-11-12 Russell Steinthal <rms39@columbia.edu> - - * prop.c: Config code for timeout, make Alarms property page use a - vbox instead of an hbox so that the propbox stays a reasonable width. - - * gnome-cal.c, main.[ch]: Add timeout for audio alarms, code to load - from config file - - * eventedit.c: Give some static functions external linkage so they - can be used elsewhere (make_spin_button); add some prototypes to - appease gcc. - -1999-11-11 Russell Steinthal <rms39@columbia.edu> - - * calendar.c (calendar_day_change): Add call to - calendar_init_alarms() to schedule another day change alarm. - -1999-11-09 Eskil Heyn Olsen <deity@eskil.dk> - - * calendar-conduit.c: Enabled debug output. Sets a g_log_domain, - now version 0.8.5. Consistent use of GSList/GList. Implemented - compare, default uses one that compares the contents of a struct - Appointment, but also has #ifdeffed code that does a field level - comparison, not complete, but perhaps educational. - - * Makefile.am (#todo_conduit_control_applet_SOURCES): Fixed an - unwanted conditional on libcalendar_conduit_la_LDFLAGS - -1999-11-05 Eskil Heyn Olsen <deity@eskil.dk> - - * calendar-conduit-control-applet.c (readStateCfg): Commented the - code out, thus the capplet works again. - -1999-11-04 Eskil Olsen <deity@eskil.dk> - - * Makefile.am: Uses the PISOCK_LIBDIR, for people with odd install - dirs for their pilot-link. Also install a pretty icon for the - calendar-conduit. - - * calendar-conduit-control-applet.c: Modfied the - try/revert/ok/cancel scheme to be more intuitive, also uses a - GtkOptionMenu for the possible sync methods. - - * calendar-conduit-control-applet.desktop: use the nice icon... - - * calendar-conduit.c: Ack, had to define debug_alarms and - alarm_default, otherwise they are undefined. Is gncal code messy - or is this considered a way of configuring the cal engine ? - Implemented delete_all syncabs methods. - - * calendar-pilot-sync.c: also had to declare debug_alarms and - alarm_defaults, just as ugly. - -1999-11-02 Russell Steinthal <rms39@columbia.edu> - - * prop.c: Add new alarm page to properties box - - * prop.c, calobj.c, main.[ch] eventedit.c: New support for default - alarms, configurable in the properties box. - - * gnome-cal.c, prop.c, main.[ch]: add option to beep on Display - alarms - -1999-10-23 Russell Steinthal <rms39@columbia.edu> - - * calendar.c (calendar_new): Correctly initialize calendar_day_end - and calendar_day_begin *before* installing day-change alarm. - -1999-10-21 Russell Steinthal <rms39@columbia.edu> - - * alarm.c, main.c: Added alarm debugging code - - * main.c (open_ok): Show an error box if the user tries to open a - non-existent file; fixes bug #1818 - -1999-10-19 Russell Steinthal <rms39@columbia.edu> - - * gnome-cal.c (calendar_notify): Fix typos which were causing - invalid times in audio notification dialogs; fixes Bug #2561 - -1999-10-18 Russell Steinthal <rms39@columbia.edu> - - * gncal-day-panel.c (gncal_day_panel_new): Placed the various - elements of the day view in paned windows so that the user can - adjust the relative sizes of the daily schedule, monthly calendar, - and to-do list. - -1999-10-18 Martin Norbäck <norpan@bigfoot.com> - - * gncal.desktop: Added swedish translation - -1999-10-13 Eskil Olsen <deity@eskil.dk> - - * Makefile.am: Hopefully the fixes the much-hated - gnome-pilot dependency. - -1999-10-07 Eskil Olsen <deity@eskil.dk> - - * calendar.c (calendar_object_changed): moved the pilot_status = - MOD up, so even a CHANGE_SUMMARY will set the modified flag. - - * calendar-conduit.c: more _free calls, vamped the noise on output. - -1999-10-06 Eskil Olsen <deity@eskil.dk> - - * *conduit*[ch]: checks return values from gpilotd_init/connect. - - * calender.c (vcalendar_create_from_calendar): removed a set - of cleanVObject cleanStrTbl, since the freed memory that the - function returned. - -1999-09-27 Timur Bakeyev <mc@bat.ru> - - * timeutil.c (time_from_isodate): Use tm.gmtoff or timezone to get - correct offset from UTC, according to HAVE_TM_GMTOFF or HAVE_TIMEZONE. - See also 1999-07-19 Matt Martin <matt@abacusnet.net> - -1999-09-27 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * month-view.c (add_event): ditto - (mark_current_day): ditto - (month_view_set): ditto - - * goto.c (goto_dialog): ditto. - - * gnome-month-item.c (gnome_month_item_init): ditto. - - * gncal-day-panel.c (gncal_day_panel_new): ditto. - - * getdate.c (RelativeDate): ditto. - - * eventedit.c (set_all_day): ditto. - (ee_rp_init_rule): ditto. - - * calendar.c (vcalendar_create_from_calendar): ditto. - - * calendar-conduit.c (update_record): ditto. - - * calobj.c (ical_object_generate_events): Get rid of pointers to - values returned from localtime, as it uses a static buffer. - -1999-09-26 Eskil Olsen <deity@eskil.dk> - - * corba-cal.c: the g_free that was commented out since glib said - was a duplicate free, was supposed to be a free. - - * GnomeCal.idl/corba-cal.c: added a get_object_id_list and a - get_objects_by_id_list. Latter is not done. - - * calendar-conduit.c: rewrote the way the conduit iterates over - records. It no longers fetches all entries (since that didn't work - with more then 285 entries. It now fetches the id list, and gets - each record. (will be using get_objects_by_id_list to get records - in amounts of 10 or so later, to reduce amount of corba calls). - - * calendar-conduit.c: now sets alarm parameters when transferring - from gnomecal to pilot. - -1999-09-23 Eskil Olsen <deity@eskil.dk> - - * calendar-conduit.c: better merge of summary/description - when doing ical_from_remote (update_record), also handles - import from gnomecal to pilot better, and on both ways, repeat - events are much better now. - -1999-09-22 Eskil Olsen <deity@eskil.dk> - - * corba-cal.c: commented out a g_free that glib reported - as being a duplicate free. - * calendar-conduit.c: got gnomecal->pilot up and runnning. - -1999-02-06 Lauris Kaplinski <lauris@ariman.ee> - - * gncal.desktop: Added Estonian translations. - -1999-09-14 Federico Mena Quintero <federico@redhat.com> - - * gncal-full-day.c (child_popup_menu): Set the data pointers for - all the items. - -1999-09-14 Kjartan Maraas <kmaraas@online.no> - - * doc/C/gnomecal.sgml: Merge from gnome-pim-1-0. Synced with newest - user-guide. - -1999-09-01 Miguel de Icaza <miguel@gnu.org> - - * eventedit.c (ee_create_buttons): Make the OK button the default - button per Russell's suggestion. - -1999-08-30 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * calendar.c (calendar_object_changed): Modify the - object->last_mod field. - (calendar_add_object): Ditto. - - Closes bug #676 - - * main.c (save_calendar_cmd): Fix problem in which we warned the - user about the calendar being modified the first time the calendar - was used. - -1999-08-22 Tomas Ogren <stric@ing.umu.se> - - * gnomecal.gnorba: "GenericFactoy" is wrong... - -1999-08-15 Miguel de Icaza <miguel@gnu.org> - - * calobj.c (ical_gen_uid): Fix the hostname part. - -1999-08-07 Peter Teichman <pat4@acpub.duke.edu> - - * calendar-pilot-sync.c (sync_pilot): sync correctly for objects - created on the pilot, but not dirty (because they have been synced - with some other program in the past) - -1999-07-30 Miguel de Icaza <miguel@gnu.org> - - * month-view.c (month_view_init): Release points here. - -1999-08-02 Peter Teichman <pat4@acpub.duke.edu> - - * Makefile.am (libcalendar_conduit_la_LDFLAGS): - libcalendar_conduit now installs - - * calendar-pilot-sync.c (sync_pilot): do deletion of appointments - correctly, when they are deleted on the pilot - (conduit_free_Appointment): protect against double-freeing parts - of the Appointment structure - (update_record): all-day events from the pilot are handled a bit - more reasonably - -1999-08-01 Peter Teichman <pat4@acpub.duke.edu> - - * calendar-pilot-sync.c (sync_object_to_pilot): The multi-day - appointment corruption bug is dead. Whoo! - -1999-07-31 Peter Teichman <pat4@acpub.duke.edu> - - * Makefile.am: fixed this up slightly with respect to pilot conduits - -1999-07-30 Jonathan Blandford <jrb@redhat.com> - - * Makefile.am (libcalendar_conduit_la_LIBADD): More autoconf-stuff - -1999-07-29 Jonathan Blandford <jrb@redhat.com> - - * gnome-cal.c (setup_widgets): Add scrolling to the yearview. - -1999-07-28 Miguel de Icaza <miguel@gnu.org> - - * calendar-pilot-sync.c: (sync_object_to_pilot): If the enddate is - not set, set the repeatForever to 1. This fixes all of the - birthdays problems I had. - - Make the code not take arguments - (sync_cal_to_pilot): Nice event update information - - * calendar.c (calendar_new): Add Event UID hash table. - (calendar_add_object): Add events to the hash table here. - (calendar_remove_object): Remove events here. - (calendar_object_find_event): Use the hash table here. - - * main.c (save_calendar_cmd): The object is already destroyed by - gnome_dialog_run. - - * calendar-pilot-sync.c (sync_object_to_pilot): Do not turn - archived bit on. - - * calobj.c (ical_gen_uid): Use the hostname, not the domain name. - (ical_gen_uid): Add a serial number. Isodates can be small. - - * corba-cal.c (cal_repo_update_pilot_id): New method to update the - pilot status. - (cal_repo_get_updated_objects): New method. Returns a list of - modified and not-sycned objects - - * calendar-pilot-sync.c (sync_cal_to_pilot): New function to sync - from the GnomeCalendar to the pilot. - (sync_object_to_pilot): Sync a single event to the pilot. - (try_alarm): Alarm syncing code. - -1999-07-27 Miguel de Icaza <miguel@gnu.org> - - * calendar-pilot-sync.c: New file. Implements PalmPilot - syncronization with the Gnome Calendar. - - * calobj.c (ical_object_new_from_string): New function. Creates - an iCalObject from a vCalendar string that is supposed to contain - only one vEvent. - - * calendar.c: - (calendar_save): Split this routine in two. - - * gnome-cal.c (gnome_calendar_new): Create the corba server here. - - * main.c: Include gnorba.h, and corba-cal-factory.h here - (close_cmd): Kill the calendar server on shutdown. - - * calobj.c (load_recur_yearly_day): Added a fixme comment. WE - need to handle intervals in the years. - - * calendar.c (calendar_object_find_in_list, calendar_object_find, - calendar_object_find_todo, calendar_object_find_event): New - functions for looking up information. - - * main.c (gnome_calendar_locate): New function. - - * corba-cal.c (calendar_create_object): New file. Implements the - corba server. - - * calendar.c (calendar_object_changed): Flag pilot-status as changed. - - * calobj.c (ical_object_to_vobject): Save pilot information for syncing. - (ical_object_create_from_vobject): Load syncing information for - pilot. Do it in a way compatible with KOrganizer. - -1999-07-26 Miguel de Icaza <miguel@gnu.org> - - * calobj.c (ical_object_create_from_vobject): Generate unique IDs - on Vevents we load that lack it. WE need this for the old - gnome calendar generated files (ie, before now :-). - - Required to sync with the Palm - -1999-07-26 Miguel de Icaza <miguel@gnu.org> - - * calobj.c (ical_object_create_from_vobject): Generate unique IDs - on Vevents we load that lack it. WE need this for the old - gnome calendar generated files (ie, before now :-). - - Required to sync with the Palm - -1999-07-19 Matt Martin <matt@abacusnet.net> - - * timeutil.c (time_from_isodate): Handle the 'Z' parameter to the - ISO date format to convert from GMT time. - -1999-07-17 Nat Friedman <nat@gnome-support.com> - - * calendar.c (calendar_add_object): Copy the new UID into the - iCalObject structure. - -1999-07-16 Miguel de Icaza <miguel@gnu.org> - - * gnome-month-item.c (gnome_month_item_set_arg): Merge fix from - gnome-pim-1-0: Fixed cut&paste bug for day fontsets. - -1999-07-14 Miguel de Icaza <miguel@gnu.org> - - * calobj.c (ical_gen_uid): Returns a UID. - (ical_object_new): Use a UID when creating an event. Should get - syncing done easier. - -1999-07-14 Nicholas J Kreucher <nick@poetic.com> - - * calobj.c (skip_numbers): Actually skip over the numbers. - (ical_object_to_vobject): Test the proper variable for storing the - proper information. - -1999-07-14 Jean-Noel Guiheneuf <jean-noel.guiheneuf@wanadoo.fr> - - * timeutil.c (time_add_month): Fixed the problem with next month - going from a 31-day to a 30-day by adjusting the date to the - closest day at the end of the month. - -1999-06-07 Mike McEwan <mike@lotusland.demon.co.uk> - - * timeutil.c (time_add_month): Tell ktime' that we don't know - about daylight saving time so that it does *not* make adjustments - when we traverse a DST boundary. - (time_year_begin): ditto. - (time_year_end): ditto. - (time_month_begin): ditto. - (time_month_end): ditto. - -1999-06-16 Anders Carlsson <anders.carlsson@tordata.se> - - * main.c (new_calendar): Realize the toplevel widget when - --hidden is passed to gnomecal. This fixes a segfault. - -1999-06-04 Robert Brady <rwb197@ecs.soton.ac.uk> - - * gnome-cal.h, gnome-cal.c: Fix abort() problem with the year view. - (Bug #1367). Thanks to Owen Cliffe <oc197@ecs.soton.ac.uk> for - helping track it down. - -1999-06-03 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * calobj.c (daynumberlist): One line bug fix from Sergey I Panov. - -1999-06-02 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * view-utils.c (nicetime): Use %H instead of %k, as %k is a GNU - extension, not available in other systems. - -1999-06-01 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * calobj.c (daynumberlist): Work around broken software that - writes a broken month-of-day as "zero". Use the dtstart date for - this on this event. - -1999-05-28 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * Makefile.am (install-data-local): help files be gone. They are - now installed from the Docbook stuff. - -1999-05-26 Russell Steinthal <steintr@condor.penguinpowered.com> - - * gncal-todo.c main.c main.h prop.c: Added support for priorities - for todo items. Doesn't do much, but you can set them and sort by - them. (Use the properties box to enable them; should they be on - by default?) - -1999-05-25 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * main.c (parse_an_arg): Added missing break here. It was causing - core dumps when invoked with --userfile. - - * gnome-cal.c (gnome_calendar_set_view): Add some assertions here, - to pin point the bug reported on gnome-list. - - * calobj.c (load_recurrence): Make intervals always exist. a 0 - interval is wrong. - -1999-05-25 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * year-view.c: Removed unused macro CALENDAR_HEIGHT. - -1999-05-25 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * year-view.c (idle_handler): Set the canvas scroll region here, - not in size_allocate(). Also, use the correct width and height - based on the allocation and the precomputed minimum width/height - values. - - * gnome-cal.c (setup_widgets): Set the scrollbar policy of the - scrolled window. - - * main.c (setup_appbar): Use the correct type for the appbar. - - * gncal-day-view.c: Removed unused function switch_to_day(). - - * gncal-day-panel.c (calendar_day_selected): Removed unused variable. - -1999-05-25 Nat Friedman <nat@nat.org> - - * doc/C/gnomecal.sgml: Fixed a typo. - - * gnome-cal.c (setup_widgets): Added a scrolled window widget into - which the year view is placed. - - * year-view.c (CALENDAR_HEIGHT): The height of the total year view - inside the scrolled window. - (idle_handler): Set the height of the year view to - CALENDAR_HEIGHT. - (year_view_size_allocate): Set the scroll region of the year view - canvas to allocation->width, CALENDAR_HEIGHT. - -1999-04-25 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * main.c (dump_todo): Add --todo flag to dump the todo contents. - -1999-04-19 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-todo.c (add_activated): Use same hack used in edit_activated - -1999-04-16 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-todo.c (edit_activated): Kill all grabs from the CList - before running the new dialog box. - - This fixes the problem of button-3/Edit on the todo item blocking - the GUI (actually, the main window responds, but not the todo - window). - -1999-04-08 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-todo.c (gncal_todo_init): Make sure we can get events for - button3. The code for the nice popup menu was there but was not - getting invoked. - -1999-04-01 Steve Murphy <murf@e-tools.com> - - * calobj.c (weekdaynum): Added this routine so Monthly recurrences - use the weekday field as a simple integer for a single weekday. - - * calobj.c (load_recur_monthly_pos): Call weekdaynum instead of - weekdaylist. The interface only lets the user input a single value - anyway. - - * calobj.c (ical_object_to_vobject): instead of code to output day - names from a bit array, use instead the value as an int and output - a single dayname. - - * calobj.c (ical_object_generate_events): first_week_day gets the - day int instead of the first entry in the bit field. I inserted a - fair chunk of code to avoid calling generate if the day is out of - range for a month. It may be unneccessary, because mktime will - turn the extra days into a valid date the next month. But not all - mktimes are equal, I fear. - - * eventedit.c (ee_store_recur_rule_to_ical): For case 3, - (Monthly), I added code to set the interval slot of the recur - struct; without this value, selecting a monthly recursing, by - date, would lead to an infinite loop broken only by a failure to - alloc more memory. Also, in the "by position" case, both - u.month_pos and u.month_day were being assigned values. This is a - mistake, as they are both part of an union, and the same - thing. The weekday field should get the recur_rr_month_weekday - value. - - * eventedit.c (ee_rp_init_rule): set default day from the weekday - field instead of the u.month_day field, which is really the - month_pos value. - - * gnome-cal.c (gnome_calendar_tag_calendar): Month days start with - 1, not 0; thus, setting tm.tm_mday = 0, and then calling mktime - will generate a time corresponding to the end of the previous - month, which may have a mday anywhere from 28 to 31. The end time - just adds 1 to the month, so your end time may not cover the last - few days of this month, depending on what the biggest mday of last - month was. I changed it so tm_mday is set to 1 instead. - -1999-03-30 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-todo.c (convert_time_t_to_char): Made static. Make it use - the full year format for strftime(). - -1999-03-27 Nuno Ferreira <nmrf@rnl.ist.utl.pt> - - * calobj.c: Include <config.h> So that strings get translated. - -1999-03-26 Tomas Ogren <stric@ing.umu.se> - - * prop.c (build_hours_menu): Made it respect 12/24h settings.. - Doesn't show until next time you open the dialog.. yet.. - -1999-03-24 Tomas Ogren <stric@ing.umu.se> - - * gncal-week-view.c (gncal_week_view_set): Did some i18n work - * eventedit.c (get_exception_string): Did some i18n work - -1999-03-24 Tomas Ogren <stric@ing.umu.se> - - * gncal-todo.c (gncal_todo_init): Made clist titles i18n:able - * main.c (poptOption): Added which views that are possible for - --view in the --help text (closes #367) - * main.c (dump_events): Added (short) month to the strftime and made - the strings i18n:able - -1999-03-23 Tomas Ogren <stric@ing.umu.se> - - * gncal/calobj.c: Added 2 paranthesis.. - "foobar = d / 60*60" is _NOT_ the same as "foobar = d / (60*60)" - which caused heavy alarm-corruption with alarms between 2 hrs and - 2 days. - -1999-03-23 Nat Friedman <nat@nat.org> - - * eventedit.c (ee_store_recur_rule_to_ical): Set the - recur->interval to the value of the recur_rr_month_period spin - button if the event is being set "by day." This closes bug #675 - as reported by bagfors@hpc2n.umu.se. Thanks for the report! - -1999-03-10 Clifford R. Conover <rconover@montana.edu> - - * gncal-todo.c (simple_todo_editor): Add support for Due Date when - adding a TODO item here. - (column_resized): New function - (init_column_sorting): New function. - (todo_click_column): New function. - (convert_time_t_to_char, make_overdue_todo_style): New functions. - - * gnome-cal.c (gnome_calendar_todo_properties_changed): New - function used to update the TODO when the properties have been - chagned for it. - - * prop.c (prop_apply_todo): Apply TODO properties. - - * gncal-day-panel.c (todo_list_properties_changed): Update the - TODO display here. - - * eventedit.c (date_edit_new): Made public - -1999-03-10 Craig A Soules (soules+@andrew.cmu.edu) - - * timeutil.c, calendar.c, calobj.c, gncal-day-panel.c: Add support - for daylight time savings. - -1999-02-28 Martin Baulig <martin@home-of-linux.org> - - * gncal-full-day.c (recompute_motion): For DRAG_MOVE, DRAG_SIZE_TOP - and DRAG_SIZE_BOTTOM: call child_focus_out () if the child currently - has the focus. - -1999-02-27 Changwoo Ryu <cwryu@adam.kaist.ac.kr> - - * quick-view.c (QUICK_VIEW_FONTSET): Added Korean font to the - fontset string. - * mark.h (*_FONTSET): Likewise. - -1999-02-23 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * calobj.c (ical_object_to_vobject): Save the owner/organizer of - the event. - (ical_object_create_from_vobject): Load the owner/organizer of the event. - - * gncal-full-day.c (delete_occurance): Assign child to data (fixes - crash on "delete this occurrance"). - -1999-02-22 Timur Bakeyev <mc@bat.ru> - - * calendar.c: According to configured values, use either tm.tm_zone - or tzname. In last case, also declare it extern. - - * prop.c: langinfo.h not available everywhere. Wrapped. BTW, works - fine without it. - -1999-02-20 Tomas Ogren <stric@ing.umu.se> - - * main.c (init_username): Made use of g_get_{user,real}_name() instead - of our own home-brew... - -1999-02-17 Sergey Panov <sipan@mit.edu> - - * gnome-month-item.c,gnome-month-item.h,goto.c,mark.h, - month-view.c,prop.c,quick-view.c,year-view.c: will define - fonts via fontset. Friendlier to locales that use iso8859-[^1] - and koi8-r encodings. Does not solve problem for Asian languiges - --- better solution is needed (e.g. standart GNOME fontstyles - defined in gtkrc). - -1999-02-16 Sergey Panov <sipan@mit.edu> - - * main.c: Use N_() macro for color settings labels in - color_props structure. - -1999-02-15 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * goto.c (goto_dialog): Indentation fixes. - -1999-02-15 Tomas Ogren <stric@ing.umu.se> - - * goto.c: Made a private copy of what localtime() returns, to be able - to keep the data after more calls to localtime(). - -1999-02-11 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * main.c (save_default_calendar): New function. Saves the - calendar if it is the user's default calendar - - * gncal-full-day.c (unrecur_appointment): - * gncal-day-panel.c (day_view_range_activated): - * eventedit.c (ee_ok): - * gncal-todo.c (ok_button): Added autosave for the default - calendar. - -1999-02-09 Tomas Ogren <stric@ing.umu.se> - - * main.c: Removed the gtk_widget_realize call. - -1999-02-06 Changwoo Ryu <cwryu@adam.kaist.ac.kr> - - * gncal.desktop: Added Korean translations. - -1999-02-04 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * eventedit.c (date_edit_new): New convenience function to create - a properly-configured date editor widget. - -1999-02-03 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-week-view.c (gncal_week_view_new): Make the calendar start - weeks on Monday if appropriate. - (gncal_week_view_time_format_changed): New function to notify the - week view that the time format has changed. - - * gncal-day-panel.c (gncal_day_panel_new): Make the calendar start - weeks on Monday if appropriate. - (gncal_day_panel_time_format_changed): New function to notify the - day panel that the time format has changed. - - * gnome-cal.c (gnome_calendar_time_format_changed): Tell the day - and week views that the time format has changed. - -1999-02-01 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * eventedit.c (event_editor_init): Set the title of the event - editor window. - -1999-01-31 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-day-view.c (gncal_day_view_expose): Do not remove the - clipping rectangle here. - - * view-utils.c (view_utils_draw_events): Remove the clipping - rectangle here, since the user of this function should not know - about it. - -1999-01-30 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * view-utils.c (view_utils_draw_events): Improve this draw - routine. Now it can split the text in lines and fit as many - events as possible. - (nicetime): Return strings without spaces at the beginning. - - * gncal-day-view.c (gncal_day_view_expose): Move clip-clear - operation here. - -1999-01-29 Jason Tackaberry <tack@dok.org> - - * gncal-full-day.c (child_popup_menu): if the user clicks on an - event that is an occurance, the menu will allow the user to delete - all occurances of this event, or just the selected occurance. - (delete_occurance): added. - - * eventedit.c (append_exception): force the clist to select the - new exception. (fixes segfault) - (delete_exception): if the last exception in the clist is deleted, - move the selection index up. (fixes segfault) - -1999-01-28 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * main.c (parse_an_arg): Add --hidden key to hide the calendar at - startup. Only works with GNOME window managers though :-( - - * calendar.c (calendar_day_change): Reschedule alarms for the new day. - - (calendar_init_alarms): Schedule an alarm for midnight to change - the calendar_day_begin/calendar_day_end. - - * alarm.c (alarm_ready): If we reschedule, there is no need to - activate any pending alarms. - -1999-01-28 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c (child_new): Insert the summary text here. - (child_focus_in): No need to raise the window, since we have - Spiffo(tm) layout code. Boy, this is old code. - (gncal_full_day_focus_child): Now that GtkText works better, we - can avoid synthesizing a click which was causing grief, anyway. - (child_button_press): Grab the focus before popping up the menu. - - * layout.c (find_index): Added a sanity check. - - * gncal-full-day.c (child_destroy): Unmap and unrealize the child - before unparenting/destroying it. - (child_unrealize): Unrealize the widget. What was I thinking? - (child_new): Save the focus_out_event signal connection id in - Child structure (in a new field). - (child_destroy): Disconnect from the focus_out_event signal, since - we don't want to get such an event when the widget is destroyed. - (gncal_full_day_destroy): Destroy the children properly; it was - leaking memory. - -1999-01-27 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * main.c (save_calendar_cmd): Warn if the calendar file has - changed. - - * calendar.c (calendar_load, calendar_save): Keep track of the - modification time for the calendar file. - -1999-01-20 Nat Friedman <nat@nat.org> - - * gncal-full-day.c (gncal_full_day_key_press): Only trap printable - characters such that hotkeys work. - (UNSELECT_TIMEOUT): Changed to 0. Much saner behavior. - - * prop.c (properties): Connect gnome_help_pbox_display to the - GnomePropertyBox help button. - -1999-01-19 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * quick-view.c (quick_view_do_popup): Do not grab the mouse here - (it was being grabbed incorrectly, anyways). - (quick_view_map_event): Grab the mouse when the window is mapped. - This avoids the ugly "while (xGrabPointer () != Success)" hack. - (quick_view_button_release): Handle button releases here. - -1999-01-19 Tomas Ogren <stric@ing.umu.se> - - * main.c: do gtk_widget_realize on the toplevel window.. - -1999-01-13 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-day-panel.c (gncal_day_panel_new): Make the little - calendar start up with the correct date. - - * gncal-week-view.c (gncal_week_view_set): Add the month to the - date range display label. - -1999-01-08 Nat Friedman <nat@nat.org> - - * main.c: Converted some more stuff to use the standards. - -1999-01-08 Nat Friedman <nat@nat.org> - - * main.c (setup_appbar): New function to create the status bar. - (setup_menu): Install menu hints. - - Menu items updated to match the standards. New Settings menu - created. - -1998-12-30 Jeff Garzik <jgarzik@pobox.com> - - * gncal/calendar.c, gncal/gnome-cal.c, gncal/main.c, - gncal/quick-view.c: - s/g_copy_strings/g_strconcat/ - -1998-12-16 Miguel de Icaza <miguel@nuclecu.unam.mx> - - Rewrote the old and broken alarm system. It never actually - worked properly. Now it works properly, and I figured a nice way - to get the Audio alarm do something nicer (it is now like an alarm - clock :-). - - * gnome-cal.c (calendar_notify): Now we take a CalendarAlarm to - actually distinguish which alarm was triggered. - - * alarm.c (alarm_ready): The code was only activating the first - alarm. Reschedule the timer upon delivery of an alarm. - -1998-12-14 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * year-view.c (idle_handler): Use the allocation size instead of - the old fields in the canvas structure. - - * goto.c (create_days): Use gtk_widget_set_usize() instead of - gnome_canvas_set_size(). - * quick-view.c (setup_event_list): Likewise. - -1998-12-09 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-todo.c (simple_todo_editor): Use gnome_dialog_set_parent. - * goto.c (goto_dialog): ditto - * prop.c (properties): ditto. - -1998-11-23 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * eventedit.c (ee_rp_init_exceptions): Update GtkClist usage. - -1998-11-23 Andrew T. Veliath <andrewtv@usa.net> - - * gncal-day-panel.c (gncal_day_panel_new): Use - gtk_scrolled_window_add_with_viewport instead of - gtk_container_add (gtk changes). - -1998-11-23 Herbert V. Riedel <hvr@hvrlab.ml.org> - - * eventedit.c: use GPOINTER_TO_INT - - * gncal-todo.c: same. - -1998-11-22 Matthew Wilson <msw@redhat.com> - - * main.c: Fixed the popt event parsing callback to have the - correct number of arguments. This stops it from segfaulting. - -1998-11-16 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * eventedit.c (ee_classification_widgets): Doh. Fixed stupid bug - where the classification buttons were not being set correctly. - (ee_store_general_values_to_ical): Take into account the fact that - radio group lists are stored in reverse order of insertion. - - * gncal-todo.c (gncal_todo_init): Use a scrolled window to put the - clist into. - -1998-11-11 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * calendar.c (calendar_save): Backup the old file before saving - the caledar. - -1998-11-06 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * calobj.c: Add ctype.h - -1998-10-31 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gnome-cal.c (gnome_calendar_direction): Add the offset from the - beginning of the current time unit (day/month/etc), otherwise it - does not work right, for example, you are on the 31st day of a - month and the next month is a 30-day one and you jump to the next - month. - -1998-10-16 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * month-view.c: Changed a lot of stuff not to use the layout code - -- the month view's days are too small to display layout - usefully. Now they display a little list of the events in each - day. We also have a popup menu for the days in the month view. - - * calendar.c (calendar_get_objects_in_range): Reverse the list so - that it is returned in increasing order. - - * eventedit.c (event_editor_new_whole_day): New public function to - create an event for the complete span of day_begin to day_end. - - * year-view.c (new_appointment): Use event_editor_new_whole_day(). - - * year-view.c (yv_popup_menu): Mark strings for i18n. - -1998-10-12 Ji Lee <g@ucsd.edu> - - * eventedit.c (ee_store_recur_rule_to_ical): The interval was - never being loaded from the spin button. - -1998-10-09 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * month-view.c (month_view_update): Create a list of children and - lay them out nicely. Lots of functions added for this purpose. - (adjust_segment): Main event segment adjustment routine. - (adjust_children): Adjusts all the children in the month view. - (child_create_segments): Creates the segments for a particular event. - (layout_children): Uses the generic layout engine to organize the children. - -1998-10-08 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-todo.c (clist_row_selected): Set the sensitivity of the - edit/delete buttons. - (gncal_todo_update): Likewise. Thanks to Dirk Luetjens for the - bug report. - - * layout.c: Do some cleanup; now we pass a struct with the layout - algorithm's state instead of passing a trillion parameters around. - - * gncal-full-day.c (layout_children): Use the new generic layout - engine. - (child_compare): Sort keys are start time then end time, not just - start time. This produces somewhat nicer results for the layout - algorithm. - - The new layout code uses a partition of the time range occupied by - the events, rather than using a fixed time granularity. This is - better since the different parts of the program that use the - layout module will have different semantics regarding snapping the - event bounds to a fixed "time grid". - -1998-10-07 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * layout.[ch]: New files that abstract the event layout code from - gncal-full-day.c into something useful for other parts of the - program. Now all event layout is done here. - - * Makefile.am (gnomecal_SOURCES): Added layout.[ch] to the list of - sources. - -1998-10-07 Carsten Schaar <nhadcasc@fs-maphy.uni-hannover.de> - - * main.c (main): Replaced the 'gnome_client_new_default' call with - 'gnome_master_client'. - -1998-10-02 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * timeutil.c (time_day_begin): Changed name from - time_start_of_day() to be consistent with the other begin/end functions. - (time_day_end): Likewise. - - * calobj.c (ical_object_get_first_weekday): New public function to - get the first toggled day in a weekday mask. Since we do not - support multiple weekdays in a monthly-by-pos rule, we just fetch - the first toggled one. - (ical_object_generate_events): Added a missing break statement. - - * timeutil.c (time_month_end): Made it consistent with the rest of - the time begin/end functions -- now it returns the first second of - the *next* month. - (time_week_end): Actually implemented this function. It will be - used when the week view is rewritten. - - * calobj.c (time_in_range): Fix off-by-one in the comparison of - the time against the end time. - - * gncal-full-day.c (expand_space): Fixed bug where the columns not - were being expanded due to a missing "slot + j". - -1998-10-01 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * month-view.c (month_view_init): Use the font #defines. - (month_view_new): Set the colors of the month view upon creation. - (mark_current_day): New function to mark the current day in the - month view. - (month_view_set): Mark the current day. - (month_view_colors_changed): Mark the current day and colorify the - month item appropriately. - - * month-view.h: Added year and month fields to the MonthView - structure. - - * main.c: Renamed the Appointments color property, since it will - be used by the month view as well. - - * goto.c (update): Set the current day's font and color. - - * year-view.c (year_view_init): Set the fonts of the month items - when creating them. - - * mark.h: Added new #defines for HEADING_FONT and TITLE_FONT. - - * year-view.c (year_view_init): Use the new font #defines. - - * prop.c (prop_apply_colors): Fixed to work with the - I-am-paranoid-and-I-need-to-size-my-ints changes to - GnomeColorPicker. - (color_spec_from_picker): Likewise. - -1998-09-30 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * goto.c (create_days): Colorify the month item and prepare it for - prelighting here. - - * main.c (color_props): Changed the default colors to something - not dull. - - * year-view.c (compute_min_size): New function to compute the - minimum size of the year view properly. - (year_view_size_request): Added two new fields to the year view - structure that contain the minimum size. Return this in the - size_request method. - (year_view_new): Call compute_min_size to save the minimum size - for later use. - (idle_handler): Make it resize the items correctly. - - * gnome-month-item.c (gnome_month_item_set_arg): Reshape when - necessary. This is needed becaues we now actually calculate a - minimum size for the month item based on the font sizes and paddings. - (check_heading_sizes): New function to calculate a minimum size - based on the headings' dimensions. - (check_day_sizes): New function to calculate a minimum size based - on the day number labels' dimensions. - (check_sizes): New function that computes a minimum size for the - month item. - (reshape): Now calls check_sizes() to ensure a minimum size for - the month item. - - * year-view.c (mark_current_day): New function to mark the current - day in the year view. - - * mark.c: Removed mark_current_day from here. - -1998-09-29 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * prop.c (fetch_color_spec): Changed name from fetch_prelight_spec - and made it conform to the new prelighting mechanism. - (fake_mark_days): Set the proper day attributes. - (reconfigure_month): Use colorify_month_item(). - (fake_mark_days): Use mark_month_item_index(). - - * mark.c (colorify_month_item): New public function to reset the - colors in a month item. - (get_attributes): New internal function that creates an array of - attributes for the days in a month item. This is the basis of all - the new optimizations to month item marking. - (unmark_month_item): Now it uses the attributes array to unmark - only the days that need unmarking. - (mark_event_in_month): Update the day attributes array. - (month_item_prepare_prelight): Changed the definition of the - prelight color query function. Use the new function. - (day_event): Do color changes based on the day attributes array. - (mark_month_item_index): New public function to mark a single day - by index. - (mark_event_in_month): Use mark_month_item_index(). - - * gnome-month-item.c (gnome_month_item_num2child): Now takes an - int, not a GnomeMonthItemChild. - (gnome_month_item_child2num): Now returns an int, not a - GnomeMonthItemChild. - (gnome_month_item_num2day): Now takes an int, not a - GnomeMonthItemChild. - - * goto.c (goto_dialog): Create the days before the year spin - button, because the year_changed callback expects the month item - to be created. The new semantics of the spin button cause it to - emit a value_changed signal on the adjustment upon creation -- is - this the behavior we want from it? - (goto_dialog): Use gtk_window_set_modal() instead of the - deprectaed gnome_dialog_set_modal(). - - * quick-view.c (quick_view_new): Make it look not as crappy by - putting the title inside the frame. - (quick_view_do_popup): Fixed the pointer grab and added a cursor. - (create_items_for_event): Query the text width/height from the - text item using the new object arguments, so that the size of the - popup window can be set properly. - - * year-view.c (do_quick_view_popup): Calculate a nice date string - for the popup window. - -1998-09-28 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * quick-view.[ch]: New file that presents a quick view of the - events in a particular day when the mouse is clicked on the year - view. Work in progress. - - * year-view.c (do_quick_view_popup): New function that creates a - quick view for the events in a day. - - * Makefile.am (gnomecal_SOURCES): Added quick-view.[ch] to the - list of sources. - -1998-09-27 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * main.c: Hotkey for File/Exit should be C-q, not C-x. - -1998-09-24 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * year-view.c (do_popup_menu): New function to execute the popup - menu in the year view. - (day_event): Invoke the popup menu with the context set to days. - (new_appointment): New function to create a new appointment from - the year view. - (do_jump): New function to do the appropriate view/date jumping - from the popup menu. - - * main.c: Fixed two icons in the File menu. - -1998-09-21 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * main.c: Added underlined shortcuts and accelerators to the main menu. - -1998-09-16 Raja R Harinath <harinath@cs.umn.edu> - - * gncal-week-view.c (<gtk/gtklabel.h>): Include. - * gncal-week-view.h (<gtk/gtkvbox.h>): Include. - -1998-09-06 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gnome-cal.c (mail_notify): Fixed the bug reported about the mail - notification not beint sent until the program was terminated. - -1998-09-03 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c (gncal_full_day_forall): Updated foreach -> - forall from Gtk changes, bleah. - - * year-view.c (day_event): New function to handle events from - days. Jumps to the day that is clicked. - - * main.c: Use a watch cursor while the previous/today/next - functions are doing their job. - - * mark.c (month_item_prepare_prelight): New public utility - function to prepare a month item for prelighting. It will store - the proper prelight information and attach the appropriate signals. - (mark_current_day): Make the current day bold as well (useful for - color-blind people, I guess). - - * prop.c (set_current_day): Reset the date in the sample calendar - and mark the current day. - (fake_mark_days): Mark fake events in the sample calendar. - - * year-view.c (year_view_set): Use the general prelighting engine. - - * goto.c (day_event): Just process button presses, as prelighting - is done behind the scenes now. - (update): Use the general prelighting engine. - - * prop.c (create_colors_page): We can now configure the colors of - the monthly calendars! Wheeeeee! There are still some nits to be - fixed, which are listed in the TODO file. - (build_color_spec): New function to build color specifications. - (parse_color_spec): New function to parse color specifications. - - * mark.c: Modified all functions to use the configured colors. - * goto.c: Likewise. - - * main.c (colors_changed): New function that notifies all - calendars that colors have changed. - - * gnome-cal.c (gnome_calendar_colors_changed): New function that - notifies all the views that the colors have changed. - - * month-view.c (month_view_colors_changed): New function that - notifies the month view that colors have changed. - - * year-view.c (year_view_colors_changed): New function that - notifies the year view that colors have changed. - - * gnome-month-item.h (struct _GnomeMonthItem): Added fields for - outline and day box colors. - - * gnome-month-item.c (gnome_month_item_set_arg): Added - outline_color, outline_color_gdk, day_box_color, and - day_box_color_gdk arguments to month items. These are convenient - to quickly set the colors of the month item. - (gnome_month_item_get_arg): Likewise. - - * main.[ch]: Added a global array of structures for color preferences. - -1998-08-31 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * goto.c: Small code cleanup. - (day_event): Upon receiving a LeaveNotify event, Reset the day's - background to the correct color. - -1998-08-29 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * mark.[ch]: New files with utility functions to mark calendars - with their events. - - * mark.c (mark_month_item): New public function to mark a month - item with events. - (unmark_month_item): New public function to unmark all the days in - a month item to their default appearance. - - * year-view.c (year_view_set): Use the new unmark_month_item() and - mark_month_item() to mark the months with events. - - * goto.c (update): New function that updates the calendar in the - Go-to dialog by marking the days. - - * timeutil.c (time_year_begin): Modified to take a time_t value. - (time_year_end): Likewise. - (time_month_begin): Actually implemented this function, which was - in the header file but not here. - (time_days_in_month): New public function that returns the number - of days in a month. - - * Makefile.am (gnomecal_SOURCES): Added mark.[ch] to the sources. - - * year-view.c (unmark_days): Use unmark_month_item(). - - * gncal-full-day.c (gncal_full_day_destroy): Fixed crash when - destroying the full day view. The full day's destroy method is - unusual in that it destroys the list of child widgets itself, as - it does not have a remove method, so it needs to reset the list to - NULL. - -1998-08-27 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gnome-month-item.c (build_month): Now does the correct thing - when the user wants weeks to start on Monday. Now all the Monday - special casing, as far as day numbering is concerned, is only in - this function. - - * year-view.c (mark_days): This function marks the days that have - events in them. It also fixes a memory leak in the old - implementation (it was leaking the whole list). - (unmark_days): New function used to unmark all the days in the - year view. - (mark_event): New function that marks all the days that are - spanned by a time range. It also fixes the bug in the old - implementation where it could possibly mark days past the ends of - the year (if the event crosses year boundaries, for example). - - * timeutil.c (time_year_begin): Take the year parameter since year - 1, not 1900. - (time_year_end): Likewise. - - * year-view.c (year_view_size_allocate): Now changing the size of - the calendars is done in the idle loop. - (idle_handler): This function actually does the resizing of the items. - - * year-view.h (struct _YearView): Added idle_id and need_resize - fields. - -1998-08-26 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * year-view.c: Beginning of the new year view. Sizing and event - marking needs to be finished. - - * gnome-cal.c: Updated for year-view. - (gnome_calendar_time_format_changed): Use year_view_time_format_changed(). - - * year-view.[ch]: Renamed the gncal-year-view.[ch] files to - year-view.[ch]. - - * Makefile.am (gnomecal_SOURCES): Updated year-view.[ch] in the - list of source files. - -1998-08-25 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * goto.c (create_days): Set the heading color of the month item. - - * main.c: Use GNOME_STOCK_PIXMAP_JUMP_TO, now that it exists, - instead of goto.xpm. Also, removed goto.xpm from cvs. - - * gnome-month-item.h (struct _GnomeMonthItem): Added fields for - the heading and day number fonts. Added fields for heading and - day number label colors. - - * gnome-month-item.c (gnome_month_item_class_init): ARG_DAY_NAMES - should be write-only. Also, added arguments for heading and day - number fonts. Added arguments for heading and day number colors. - -1998-08-24 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * prop.c (build_two_radio_group): Doh. Set the state of the radio - buttons properly. - - * month-view.c (month_view_time_format_changed): New public - function that notifies the month view of a time format change. - - * gnome-cal.c (gnome_calendar_time_format_changed): New public - function that notifies the calendar of a time format change. - - * main.c (time_format_changed): Use gnome_calendar_time_format_changed(). - - * month-view.c (month_view_update): New public function to update - the month view when an event changes. This is still unfinished. - (month_view_set): New public function to set the month in the - month view. - - * gnome-cal.c (gnome_calendar_direction): Add case for month view. - (gnome_calendar_set_view): Likewise. - (gnome_calendar_update_all): Likewise. - - * timeutil.c (time_add_week): Implemented the time_add_week() - function, which was on the header file. - (time_add_month): Added public month-adding routine. - - * gnome-cal.c (gnome_calendar_get_current_view_name): Add case for - month view. - (gnome_calendar_goto): Likewise, and set the time on the month view. - - * month-view.c (month_view_new): Now it takes the calendar plus - the time_t representing the month. - - * gnome-month-item.h: Added documentation on the object arguments - for the month item. - - * month-view.c (month_view_init): Added a month/year heading to - the month view. - - * TODO: Updated the TODO list a bit. - - * main.c (gnome_cal_file_menu): The preferences menu option should - go in the File menu. - (gnome_cal_edit_menu): Added stock pixmaps to the menu items. - (gnome_cal_menu): Renamed the Calendar menu to Edit. - (gnome_cal_help_menu): Use "About Gnomecal", not just "About". - - * prop.c (hour_activated): Notify the property box that it has changed. - - * main.c: Changed the Properties menu item to Preferences. These - are global application preferences, not a single calendar's - properties. - - * prop.c (prop_apply): Save the week_starts_on_monday flag to the - configuration file. - (properties): Added a check button for weeks starting on Monday. - (properties): Beautified the Preferences dialog. - - * month-view.c (month_view_init): - * goto.c (create_days): Set the month item to start weeks on - Monday if appropriate. - - * main.c (init_calendar): A boolean is not an hour, so don't - range_check_hour() on it. - (init_calendar): Added a global week_starts_on_monday flag. - - * main.h: Added global week_starts_on_monday flag. - -1998-08-21 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * calobj.c (ical_object_create_from_vobject): If mail alarm or - program alarm are missing the action, then set an empty default. - -1998-08-18 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gnome-month-item.c (gnome_month_item_day2index): New public - function to get the displayed day index of the specified date. - - * gnome-cal.c (gnome_calendar_goto_today): New public function to - jump to the current day. - - * goto.c (day_event): Jump to the selected day when the user - clicks the mouse, and prelight days as appropriate. - - * timeutil.c (time_from_day): New public function to build a - time_t from a year/month/day triplet. - - * gnome-month-item.c (gnome_month_item_num2child): - (gnome_month_item_child2num): New public functions to convert an - index into a child and vice-versa, respectively. - (gnome_month_item_num2day): New public function to convert a child - number into a displayed day number. - - * goto.c (goto_dialog): Doh, use gnome-dialog properly :-) - - * gnome-month-item.c (create_items): Use g_strdup()ed day names - from the start. - -1998-08-17 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * main.c (gnome_toolbar): Made it use goto.xpm. - - * Makefile.am (EXTRA_DIST): Added goto.xpm to the list of files. - -1998-08-13 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gnome-month-item.c (gnome_month_item_set_arg): Doh. Actually - recalculate the days using the month and year. - - * main.c: Added "Go to" button to quickly jump to a specific date. - - * goto.c: New file that defines the quick go-to date dialog. - - * Makefile.am (gnomecal_SOURCES): Added goto.c to the sources. - -1998-08-11 Nuno Ferreira <nmrf@rnl.ist.utl.pt> - - * main.c (new_calendar): Made title i18n friendly. This was bug - #215. - - * eventedit.c (ee_store_recur_end_to_ical): Set recur->enddate to - recur->_enddate, not to itself, when adding recurring event and - supplying an end date. This fixes (at least part of) bug #99. - -1998-08-10 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * month-view.[ch]: Start of the month view widget. This will use - the generic month item and extend it to have the semantics desired - for the gnomecal month view. - - * gnome-month-item.[ch]: New generic canvas item for the month - view and the "small calendars". This is intended to be a - high-level display engine for monthly calendars. This is a work - in progress. - - * gnome-cal.h (GnomeCalendar): Added a month_view field. - - * gnome-cal.c (setup_widgets): Create the month view and insert it - into the notebook. - - * Makefile.am: Added month-view.[ch] and gnome-month-item.[ch] to - the sources. - -1998-08-03 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * main.c (about_calendar_cmd): Use an array of const strings to - keep gcc happy. - - * alarm.c (alarm_compare_by_time): Use gconstpointer to keep gcc happy. - * calendar.c (calendar_object_compare_by_start): Likewise. - * gncal-full-day.c (child_compare_by_start): Likewise. - -1998-07-07 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * main.c: Add support for --view flag. - (session_save_state): Save the view mode; - (new_calendar): Now takes a view mode flag. - - * gnome-cal.c (gnome_calendar_get_current_view_name): New - function for enhancing the session management support for - gnomecal. - (gnome_calendar_set_view): New function that makes a given page - active. - -1998-07-01 Nuno Ferreira <nmrf@rnl.ist.utl.pt> - - * gncal.desktop: Added Portuguese translation. - -Mon Jun 22 13:01:16 1998 Havoc Pennington <hp@pobox.com> - - * main.c (session_save_state): Use gnome_geometry_string to get - the geometry string. - -1998-06-04 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * eventedit.c (ee_rp_init_rule): Do not subtract 1 from - tm->tm_mday for the default_day. - - * gnome-cal.c (gnome_calendar_new): - (gnome_calendar_goto): Use the start of the day -- things expect - it to be that way. - -1998-05-27 Nuno Ferreira <nmrf@rnl.ist.utl.pt> - - * eventedit.c (ee_store_recur_rule_to_ical): Fill in - ical->recur->interval from value in spin_button. This ixed an - infinnite loop. - -1998-05-30 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c (child_draw): Paint the decorations correctly. - (child_draw_decor): Paint the recurrence/bell icons correctly. - -1998-05-25 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * eventedit.c (ee_rp_init_rule): Use the contents of - ee->ical->dtstart for computing the predefined values of the recurrence. - - * gncal-full-day.c (gncal_full_day_unrealize): Fix the gc - destruction in the unrealization code and fix the pixmap unrefing. - - * main.c (close_cmd): Remove a bad hack that disabled calendar - widget destruction. - - * calobj.c (ical_object_generate_events): Fix for the weekly event - generation. Was reported on the bug tracking system. - -1998-05-18 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-full-day.c (layout_children): Implemented ultra-cool - layout for the events that share the same time range. Gals and - guys you can now drop Outlook on the recycle bin. - - Which reminds me. We do not have a recycle bin. How could that - happen in a project as cool as this one? Someone explain this to - me. - -1998-05-18 Federico Mena <federico@nuclecu.unam.mx> - - * gncal-full-day.c (paint_back): Eliminated unnecessary border repainting. - -Sun May 17 17:55:03 1998 Havoc Pennington <hp@pobox.com> - - * gncal-todo.c (simple_todo_editor): Close dialog when return is pressed. - -1998-05-15 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gnome-cal.c (mark_gtk_calendar_day): Bug free version of the - range computation in place. - - * gncal-year-view.c (year_view_mark_day): Use the same new version - of the range computation here. - - * calobj.c (ical_object_generate_events): Fix the begin/end - condition. - -1998-05-14 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * timeutil.c (isodate_from_time_t): Do not add the spurious - padding. - - * calobj.c (store_date_list): Bug fix: I was using the wrong - pointer when saving the exception date list. - (set_date_list): Bug fix: load correctly the complete exception - date list. - (set_date_list): Use ',' for the exception date separator as the - versit people can not get their standard right. - - * gncal-full-day.c (unrecur_appointment): Support for making an - existing recurrent event `movable' for a day. - - * calobj.c (ical_object_add_exdate): New routine, used to add - exception dates. - (ical_object_duplicate): New routine: used to do the magic - recur->no-recur event. - -1998-05-08 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-full-day.c (new_appointment): Use gtk_calendar freeze/thaw - - * gncal-year-view.c (gncal_year_view_set_year): Use gtkcalendar freeze/thaw. - - * eventedit.c (event_editor_init): Use gnome_dialog_set_close to - avoid the ugly warning. - - * main.c (display_objedit): Default to the day the user is looking - at. - -1998-05-05 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-day-panel.c (full_day_size_allocated): Do not emit a value - changed signal if the value is the same. - -1998-05-04 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * prop.c (prop_apply): Only run the apply code once. - -1998-05-03 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-day-panel.c (update): Draw the day at startup. - (gncal_day_panel_set): Fix selected-day display. - (gncal_day_panel_new): Switch day on double clicks, not on single - clicks. - - * calobj.c (ical_object_compute_end): Removed debug messages. - -1998-04-30 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * prop.c (prop_apply): Do not call prop_cancel, ths is now using - GnomePropertyDialog. - -1998-04-29 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-week-view.c (sync_week): Use gnome_calendar_tag_calendar. - - * gnome-cal.c (gnome_calendar_tag_calendar): New routine used to - fill a gtk_calendar with the events on a GnomeCalendar object. - - * gncal-week-view.c (gncal_week_view_new): Set the week to the day - we double clicked. - -1998-04-28 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gnome-cal.c (calendar_notify): Apply black magic to get mail - notifications to work. - - * gncal-full-day.c (child_focus_out): Temporary optimization, the - child_focus_out is constantly calling the - gnome_calendar_object_changed when the property editor has been - invoked. This happens every time the mouse moves crosses the main - window. - - * calendar.c (calendar_object_changed): Reschedule alarms when a - calendar object has changed its times. - -Sat Apr 25 22:20:45 1998 Havoc Pennington <hp@pobox.com> - - * eventedit.c, eventedit.h: Descend from GnomeDialog. Took vbox - out of class structure; use GnomeDialog vbox - instead. gnome_dialog_set_destroy instead of destroying in button - callbacks. Don't create buttons, separator, or vbox manually. - #include <libgnomeui/gnome-dialog.h>. - -1998-04-24 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * calobj.c (ical_object_create_from_vobject): Fixed alarm loading; - Load snooze time and snooze count - -1998-04-23 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * calendar.c (calendar_save): Actually save the to-do entries. - - * gncal-todo.c (simple_todo_editor): Now you can add and edit - to-do entries. - -1998-04-22 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c: Made it use popup_menu(). - - * popup-menu.c: New file with utility functions for creating popup - menus. Maybe such a thing would be useful in libgnomeui, a la - gnome-app-helper? - - * Makefile.am (gnomecal_SOURCES): Added popup-menu.[ch] to the sources. - -1998-04-22 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * prop.c (properties): Added Calendar properties editor. - (properties): Make the code use a propery box. - - * main.c: Save/load properties (fix to old commit). - -1998-04-21 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-todo.c: New widget for editing TODO lists. This will be - worked on a lot. - - * Makefile.am (gnomecal_SOURCES): Added gncal-todo.[ch] to the sources. - - * gncal-day-panel.c: Make it use the new TODO widget. - -1998-04-21 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * timeutil.c (isodate_from_time_t): Do not save with the global - time flag (Z at the end of the isodate). When we figure out a way - to load times in GMT time, we will add this back - - * view-utils.c (popup_menu): Moved this routine here as there are - more users of this code. - - * gncal-day-view.c (gncal_day_view_class_init): Add button press - handler. - (new_appointment): New routine for creating appointments on a day. - - - - * main.c (save_ok): Added call to gtk_window_set_wmclass. - - * gncal-day-panel.c (calendar_day_selected): Fix, years for mktime - should substract 1900 and gtk_calendar stores years relative to - year 0. - - * gncal-week-view.c (gncal_week_view_new): Make the week view - descend from VBox so that we can add a label to it. - (gncal_week_view_set): Display the ending day of the week - correctly. - - Added a label that displays the week range. - -1998-04-21 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gnome-cal.c: Made it use GncalDayPanel. - - * gncal-day-panel.c: New widget for the day view in the main - calendar toplevel. It basically takes care of everything - gnome-cal did by hand with respect to the day view. - - * Makefile.am (gnomecal_SOURCES): Added gncal-day-panel.[ch] to - the rules. - - * main.c: Added a separator between the About menu item and the - help topics. - -1998-04-20 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * eventedit.c (ee_ok): Mark the event as non-new after accepting changes. - -1998-04-20 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c (gncal_full_day_get_day_start_yoffset): New - public function that returns the y offset for the row - corresponding to the "day begin" time. - - * gncal-full-day.c (gncal_full_day_key_press): Now any printable - keystroke (not just Return) will activate the selected range. - - * gncal-full-day.c (paint_back): Made it use the new paint_row - function instead of painting everything directly. We calculate - areas in a smarter way so there is even less flicker than before, - especially when selecting regions. - - * eventedit.c: Sensitize recurrence widgets properly. - - * calobj.c (duration_callback): Pass the correct pointer type to - is_date_in_list(). - -1998-04-20 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * calobj.c (duration_callback): Take exception dates into - account. - - * gncal-full-day.c (new_appointment): Setup the event editor dates - to those of the currently displayed day. - (gncal_full_day_selection_range): Use sensible values in the case - no range is selected. - (new_appointment): Events now use the current day for event creation. - - * view-utils.c: Pretty up the time display. - - * calobj.c (ical_object_compute_end): Initialize - ico->recur->enddate, otherwise we loop forever during final date computation. - - * eventedit.c: Now recurrence is toggled by a radio button in the - recurrence page, as the checkbox is confusing. - - * calobj.c (is_date_in_list): Add support for the exclussion - dates. - -1998-04-18 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-year-view.c (double_click): Fix this routine as well. - - * gncal-week-view.c (jump_to_day): Bind the gtkcalendar signals to - the week. - - * gncal-year-view.c (gncal_year_view_set_year): Put things in the - proper range. Now the year view actually matches this year. - - * gnome-cal.html: Added small documentation. - - * main.c: Add more icons to the menus; Rename some menubar - entries; Add `new' icon to the toolbar. - (dump_events): Added argument handling and dumping of events from - the command line. Extremely cool. - - * getdate.y: Taken from the CVS source code. Used for date - parsing in the command line. - - Internationalized getdate.y. Wee! It even works with spanish. - - * calobj.c (ical_object_to_vobject): Add Quoted printable property - to items containing new lines. - (duration): Use unsigned integers, to work around buggy calendar - files generated by korganizer. - - * main.c (save_calendar_cmd): Do not ask for file name if we are - saving. - (save_as_calendar_cmd): New command. - - -1998-04-17 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * alarm.c (alarm_kill, alarm_init, alarm_add): Implement the alarm - management framework. - -1998-04-17 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * calobj.c (ical_new): Added mandatory status property. - (ical_object_to_vobject): Only store "related" list if it exists. - (store_list): Add terminating null char and free the correct data. - - * main.c (save_calendar_cmd): Implemented calendar saving. - (open_calendar_cmd): Implemented calendar loading. - (new_calendar_cmd): Implemented calendar creation. - (new_calendar): Don't load our test calendar by default. - - * gncal-full-day.c (delete_appointment): Delete appointment implemented. - - * eventedit.c (ee_store_recur_values_to_ical): Free/create - ical's recurrence appropriately. - (ee_rp_init_rule): Initialize all missing parameters from ical. - (ee_rp_init_ending_date): Initialize missing fields from ical. - -1998-04-17 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gnome-cal.c (gnome_calendar_remove_object): Add support for - removing objects. - -1998-04-17 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * eventedit.c (ee_init_recurrence_page): New function that creates - the recurrence page in the toplevel notebook. - (ee_store_recur_values_to_ical): Now we can also store the recurrences. - -1998-04-17 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * calobj.c (ical_object_generate_events): Implement - RECUR_MONTHLY_BY_POS implemented. - (ical_object_create_from_vobject): Fix the alarm - initialization code. - (save_alarm): Save alarms. - (ical_object_generate_events): Fixed the recurrent code to take - into account the recur->endate field (if at all specified). - - (ical_object_to_vobject): Implement recurrence rule saving. - -1998-04-16 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * eventedit.c (ee_store_alarm): Use menu_shell->children, not - menu->children. Why does GtkMenu have a children field in the - object structure? - (check_dates): New function that insures that start_date < end_date. - (check_times): In addition to checking whether the event spans the - whole day, now it insures that start_time < end_time. - - * gncal-full-day.c (child_set_size): Now children get bigger - temporarily while they are focused. This allows the handles not - to "overlap" the rows used by the child and thus allow editing of - very thin events. - (recompute_motion): Fix for new child coordinates. - (gncal_full_day_expose): Make it use find_child_by_window() - instead of looking for it by hand. - - * bell.xpm recur.xpm: XPM files for events with alarm and - recurrence, respectively. - -1998-04-15 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c (button_1): Preserve the up/down cursor while dragging. - - * gncal-full-day.c (child_draw): Now children have a vertical - handle as well. This can be used to move the child anytime, not - only when it is focused. - (recompute_motion): Modified for new drag behavior. - - * eventedit.c (ee_init_general_page): The general_owner may be - null. Do the proper thing when creating the label. - (ee_ok): Update the gnome calendar appropriately. - - * timeutil.h: - * gncal-year-view.h: Add some missing prototypes. - - * gncal-full-day.c (child_popup_menu): Set the sensitivity of menu - items according to whether the ical object is being edited or not. - - * eventedit.c (event_editor_new): Set the "being edited" flag on - the ical object (stored as the ical object's user data). - (event_editor_destroy): Release the flag. - - * calobj.h: The iCalObject structure now has a generic user_data pointer. - * calobj.c (ical_object_set_user_data ical_object_get_user_data): - Functions to set this data. - - * gncal-full-day.c (child_button_press): Do child popup menu correctly. - - * main.c (about_calendar_cmd): Fixed my address and added Arturo - to the authors in the about box. - - * gncal-full-day.c (find_child_by_window): Compare child's widget - windows by user_data (which will be the parent widget, that is, - the text widget). We cannot assume that child->widget->window - will be *the* window we are interested on because there may be - child widgets with multiple windows. - -1998-04-15 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * calobj.c (ical_foreach): Define iterator routine. - -1998-04-15 Arturo Espinosa Aldama <arturo@nuclecu.unam.mx> - - * gncal-year-view.[hc]: Now using time_t for new and set. - Random fixes, as well. - -1998-04-15 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c (button_3): New popup menus activated with - mouse button 3. - (create_appointment): Create a new appointment from the popup - menus. See the FIXME. - -1998-04-15 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-full-day.c (layout_kill_rows): Routine to destory rows - array properly. - - * gncal-year-view.c (gncal_year_view_new): Add missing year in - call to strftime. - - * calobj.c (ical_object_create_from_vobject): Fixed memory leaks - from the return values of versit's fakeCString. - -1998-04-14 Arturo Espinosa Aldama <arturo@nuclecu.unam.mx> - - * gncal-year-view.[hc]: New widget for the year view. - * Makefile.am: added required compilation of the new files. - -1998-04-14 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * eventedit.c (event_editor_setup_time_frame): Fixed some table - expansions to make the dialog look nicer when resized. - - * calobj.c (ignore_space): Fixed compiler warning about unused - computed value. - (ocurrencelist): Replace str by p confusion. Removed unused - variables value and q. - (daynumber): Fixed a couple of warnings about unused values. - (load_recurrence): Removed unused variable c. Added a default - clause to the switch(type). - - * eventedit.c (ee_rp_init_frequency): Removed unused variable content. - Fixed a compiler warning by adding a missing cast. - - * calobj.c (ical_object_create_from_vobject): Make the - load_recurrence() part work correctly. Eliminated use of - syntax_error variable. - -1998-04-13 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c (child_key_press): Unfocus the child and focus - the parent fullday widget when the user presses Esc. - - * gncal-week-view.c (gncal_week_view_update): Now takes object and - flags parameters. - * gncal-day-view.c (gncal_day_view_update): Likewise. - * gncal-full-day.c (gncal_full_day_update): Likewise. - (child_focus_in): New function. In conjunction with - child_focus_out(), these only display the handles in the child - when it is focused. The result is that the user can see more of - the child's text when nothing is focused, and we can also display - fatter and nicer drag handles. - - * gnome-cal.c (gnome_calendar_object_changed): Now takes an - additional flags parameter - (gnome_calendar_update_all): Made function static. Now takes - changed object and flags parameters as well. - (gnome_calendar_object_changed): Now takes additional flags - parameter to indicate what changed in the specified object. - - * calobj.h (CalObjectChange): New enum with flags to describe what - has been changed in an object. - - * gncal-full-day.h: - * gncal-full-day.c (gncal_full_day_focus_child): New function to - let the outside world decide which child to focus. - (gncal_full_day_focus_child): Bleah. We have to synthesize a - click because GtkText will not set the cursor when you focus it. - - * gnome-cal.c (day_view_range_activated): Focus the new child in - the full day widget. - - * eventedit.c (event_editor_setup_time_frame): Re-aligned some - widgets to make it look prettier. - (ee_alarm_widgets): Likewise. - (ee_init_general_page): Likewise. - (ee_classification_widgets): Likewise. - (event_editor_init_widgets): Likewise. - - * gnome-cal.c (day_view_range_activated): Create new object and - add it to the calendar. You can now select a range in the - full-day view, hit Return, and a new event will be added at the - selected range. I still have to figure out how to focus this new child. - - * gncal-full-day.c (paint_back): Rewrote function to avoid - painting an area more than once -- eliminate flicker. - (paint_back_rows): New function that calls paint_back() only for - the area of the specified rows. - (gncal_full_day_button_press): - (gncal_full_day_button_release): - (gncal_full_day_motion): Made these functions use - paint_back_rows() instead of paint_back(), to eliminate flicker. Wheee! - -1998-04-12 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gnome-cal.c (setup_day_view): We now connect to the - range_activated signal of the fullday widget instead of catching - key presses ourselves. - (day_view_range_activated): New function that creates a new - iCalObject and inserts it into the calendar, not finished yet. - -1998-04-11 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c (get_time_from_rows): New function, calculates - a pair of time_t values from the specified start and number of rows. - - * gncal-full-day.h (GncalFullDayClass): New signal - "range_activated". It is emitted when a range is selected and the - user hits Return. - (gncal_full_day_selection_range): New function, returns the - selected range. - - * gncal-full-day.c (struct drag_info): Moved selection information - to their own fields instead of sharing the child's drag fields. - This allows us to keep the selection when a child is moved. - (recompute_motion): Made the case when (row < di->sel_click_row) - work correctly. - -1998-04-11 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gnome-cal.c (gnome_calendar_goto): Add support for navigating - on the day view. - - * timeutil.c (time_start_of_day, time_end_of_day, time_day_hour): - New time manipulation functions. - - * eventedit.c (ee_rp_init_frequency): Add the different frequency - editors to a notebook. Make the notebook startup on the entry - selected recurrence type; - -1998-04-11 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c (recompute_motion): Now we support selecting a - range in the main window (by clicking+dragging). It flickers - horribly and is not perfect, but it is a start. - -1998-04-09 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c: #include <string.h> - - * gncal-full-day.c (child_map): Show instead of just map the child - widget (otherwise the text widget gets confused and will not focus). - - * calobj.c (ical_object_to_vobject): Quote chars as 'x', not "x". - - * calobj.h: Added prototype for ical_object_to_vobject(). - - * gnome-cal.c (gnome_calendar_object_changed): New function. This - should be called when a calendar object is changed. - - * gncal-full-day.c (update_from_drag_info): Call - gnome_calendar_object_changed() instead of updating manually. - - * calendar.c (calendar_add_object): - (calendar_remove_object): Set the modified flag to true. - - * gncal-full-day.c (gncal_full_day_draw): Finished implementing - this function. - -1998-04-08 Raja R Harinath <harinath@cs.umn.edu> - - * gncal.c (update_calendar): Say `#if 0', not `#ifdef 0'. - -1998-04-07 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * eventedit.c: Removed unused global variable parent_class. - - * eventedit.h: Renamed gtk_window field to window. - Made the parent_class field in the EventEditorClass structure be a - GtkWindowClass, not a gnome property box class. - Added prototype for event_editor_get_type(). - -1998-04-06 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-week-view.c (gncal_week_view_new): Use the new - gtk_table_set_homogeneous() instead of setting the variable directly. - -1998-04-03 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * eventedit.c (ee_create_ae): Make it return void. - (ee_alarm_widgets): Remove some unused variables. - (ee_store_alarm): Make it return void. - #include <string.h> - - * eventedit.h: #include "gnome-cal.h" - - * calobj.c (list_free): Don't use g_free in the g_list_foreach. - - * calendar.h: Add prototype for calendar_load(). - - * timeutil.h: Add prototypes for time_add_*(). - - * calendar.c: - * calobj.c: - * eventedit.c: - * gnome-cal.c: #include "timeutil.h" - - * gncal-day-view.c (gncal_day_view_size_request): Make the minimum - width equal or larger to the title width. - - * main.c: #include "eventedit.h" - (main): Add a return statement. - (new_calendar): Show stuff *after* the calendar has been loaded. - - * gnome-cal.c (gnome_calendar_load): Update the day view. - (setup_widgets): Hackish setup of a day view widget - will fix later. - (gnome_calendar_init): Initialize all fields. - - * gnome-cal.h: Added day_view field. Maybe this should be changed - when the a complete day view panel is complete. - - * gncal-day-view.c (gncal_day_view_update): Draw after update, not - before. - -1998-04-06 Carsten Schaar <nhadcasc@fs-maphy.uni-hannover.de> - - * versit/.cvsignore: New file. - -Fri Apr 3 22:31:54 1998 Tom Tromey <tromey@cygnus.com> - - * calendar.c: Include <config.h>. - -1998-04-03 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * timeutil.c (time_add_year, time_add_year, time_add_week): - Routines for time manipulation. - - * calobj.c (ical_object_destroy): Full destruction of the object. - - * eventedit.c: Finished the main event editor form; It still - lacks the details and the recurrence bits. It now adds events - and cancels. - -1998-04-03 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * view-utils.c (view_utils_draw_events): The "better" format - string for strftime() wasn't better, after all :-( - -1998-04-02 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-full-day.c: New full-day widget. It is still a work in - progress. It will be similar to M$ Schedule's nifty full day view - widget, but with Gtk's elegance :-) - - * Makefile.am (gnomecal_SOURCES): Added gncal-full-day.[ch] to the sources. - -1998-04-02 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * eventedit.c: Object editor widget. We dropped ObjEdit. - - * timeutil.c (time_from_isodate): Fix. - - * view-utils.c (view_utils_draw_events): Changed the display - formats. - -1998-04-02 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * view-utils.c (view_utils_draw_events): Use better format - specifier for strftime(). - (view_utils_draw_textured_frame): Ultra-nifty function to draw - textured "metal" frames, like Netscape's handles. - -1998-04-02 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * gncal-day-view.c (gncal_day_view_update): Day events are now - cached inside the widget. They get initialized at this time. - - * view-utils.c (view_utils_draw_events): Use the list of events. - -1998-04-02 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-day-view.c (gncal_day_view_set_shadow): New customization - function. We can't decide on a stupid border type :-) - (gncal_day_view_init): Made GTK_SHADOW_ETCHED_IN be the default - shadow type. Looks good. - -1998-04-02 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * main.c: New main program that uses our new datatypes and - objects. - - * calendar.c (calendar_load_from_vobject, calendar_load): - Implement loading of vCalendar objects and vCalendar files. - - * calobj.c (ical_object_create_from_vobject): Implement loading of - vCalendar event and todo objects. - - * timeutil.c (isodate_from_time_t): New function. - - * gnome-cal.c, gnome-cal.h: Implement a toplevel widget, derived - from GnomeApp. It holds all of the day views and arbitrates the - display. - -1998-04-02 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-week-view.[ch]: New week view composite widget. This - provides a full week view (7 day views plus busy time display -- - the latter is currently unimplemented). - -1998-04-01 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal-day-view.c: New day view widget. It is intended to be a - child widget of the week view composite widget. - - * calendar.c (calendar_get_objects_in_range): - (calendar_get_events_in_range): - (calendar_get_journal_in_range): - (calendar_get_journal_in_range): These functions now take a - sort_func parameter, which is of type GCompareFunc. If the - specified value is non-NULL, it will return a sorted list. - Otherwise, it will return an unordered list. - (calendar_compare_by_dtstart): Provide a generic sorting routine - for calendar objects. - -1998-04-01 Miguel de Icaza <miguel@kernel.org> - - * Start from scratch - -Tue Mar 31 23:46:50 1998 Tom Tromey <tromey@cygnus.com> - - * timeutil.c (format_simple_hour): `buf' now static. - -1998-03-31 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal.c: Removed #include "gtkcalendar.h", because it now comes - from libgnomeui. - - * Makefile.am (gncal_SOURCES): Added new source files to the rules. - - * timeutil.c (format_simple_hour): New function, formats an - hour/am_pm pair into a string of the form "3am", "12pm", "05h", - "19h", etc. It is used by the day view widget for its labels. - -1998-03-31 Craig Small <csmall@small.dropbear.id.au> - - * Now has (non working) session maangement - * Uses a clist for the dailylist like gtt - -Sat Mar 21 15:43:20 1998 Tom Tromey <tromey@cygnus.com> - - * gncal.c: Use gnome_message_box_*, not gnome_messagebox_*. - -1998-03-12 Craig Small <csmall@small.dropbear.id.au> - - * Now linked (in some horrible way) to the gtkcalendar widget. - -Sun Mar 8 16:38:10 1998 Tom Tromey <tromey@cygnus.com> - - * Makefile.am (INCLUDES): Added GNOME_INCLUDEDIR. - (gncal_LDADD): Don't include libsupport.a. - - * gncal.c (main): Use new gnome_init. - -1998-02-19 Federico Mena Quintero <federico@nuclecu.unam.mx> - - * gncal.c (main): Added app_id "gncal". - -1998-02-19 Carsten Schaar <nhadcasc@fs-maphy.uni-hannover.de> - - * Makefile.am (gncal_LDADD): Added '$(INTLLIBS)' - -1998-02-18 Raja R Harinath <harinath@cs.umn.edu> - - * Makefile.am (gncal_LDADD): Include `libsupport.a'. - - * calcs.c (month_atoi): Replace buggy explicit loop string compare - with strcasecmp. - (day_atoi): Likewise. - -Sun Jan 25 23:38:30 1998 Miguel de Icaza <miguel@nuclecu.unam.mx> - - * menus.c: Replace "Quit" with "Exit". |