diff options
Diffstat (limited to 'camel/ChangeLog')
| -rw-r--r-- | camel/ChangeLog | 1614 |
1 files changed, 0 insertions, 1614 deletions
diff --git a/camel/ChangeLog b/camel/ChangeLog deleted file mode 100644 index e49dbb06e1..0000000000 --- a/camel/ChangeLog +++ /dev/null @@ -1,1614 +0,0 @@ -2000-04-23 Dan Winship <danw@helixcode.com> - - * camel-mime-utils.c (header_to_decode, header_mime_decode): fix - some obvious minor bugs noted by -Wall. - -2000-04-23 NotZed <NotZed@HelixCode.com> - - * camel-data-wrapper.c (set_mime_type_field): Ref the - content_field when we get it? - - * camel-mime-parser.c (camel_mime_parser_unstep): New function. - Cause a subsequent call to mime_parser_step() to return the same - state over again. - - * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): - Initial test code using the mime parser to construct the message. - - * camel-mime-part.c (construct_from_parser): part constructor. - (camel_mime_part_construct_content): Basically a simpler - replacement for the datawrapper repository. - (camel_mime_part_init): Set the default type to text/plain. - - * camel-simple-data-wrapper.c (construct_from_parser): Initial - implementation of a content constructor. - - * camel-multipart.c (construct_from_parser): Multipart - construction routine. - (camel_multipart_init): Set the default multipart type to - multipart/mixed. Duh, no subtype is not allowed anyway. - -2000-04-22 Dan Winship <danw@helixcode.com> - - * camel-multipart.[ch]: clean, document, etc. - (camel_multipart_init): pick a prettier default boundary. Still - need to deal with the larger problem - -2000-04-22 NotZed <NotZed@HelixCode.com> - - * camel-mime-message.h (struct _CamelMimeMessage): Removed - send_date, and received_date, and replaced it with a time_t - 'date' (this is what the header is called), and date_offset to - store the GMT offset of the date. - - * camel-mime-message.c (camel_mime_message_set_from): Update raw - header as we go. - (_set_from): Removed. - (_get_from): Removed. - (camel_mime_message_get_from): Moved implementation here. - (camel_mime_message_get_subject): Move implementation here. - (_get_subject): Nuked. - (camel_mime_message_set_subject): Handle utf-8 input, and also - update raw header when changed. - (_set_subject): Removed. - (_set_received_date): Removed. - (camel_mime_message_set_received_date): Removed. - (_get_received_date): Removed. - (camel_mime_message_get_received_date): Removed. - (_get_sent_date): Removed. - (camel_mime_message_get_sent_date): Removed. - (camel_mime_message_get_date): New function to get the date as a - time_t/offset. - (camel_mime_message_set_date): Set the date as a time_t/offset. - (camel_mime_message_get_date_string): Get the date as a string. - (camel_mime_message_init): Initialise the current date as - 'CMAEL_MESSAGE_DATE_CURRENT'. - (_set_reply_to): Removed. - (camel_mime_message_set_reply_to): Moved implementation here. - This is still broken, reply-to can have multiple addresses. - (_get_reply_to): Removed. - (_set_field): Removed, no longer used anywhere. - (_get_field): Also removed. - (_init_header_name_table): Add the Date header. - (process_header): Also handle snooping of Date header here. - - * camel-stream-filter.c (finalise): Unref the source stream on - finalise, and also call the parent class (oops). - - * camel-mime-parser.c (camel_mime_parser_state): New function to - get the current parser state. - (camel_mime_parser_stream): Allow you to get the stream back from - the mime_parser. - (camel_mime_parser_fd): Alternative to allow you to get the fd - back from the mime_parser. - (folder_scan_init_with_stream): Properly ref/unref the stream. - (folder_scan_close): Properly unref the stream/close the fd on - exit. - (folder_scan_init_with_fd): Close the old fd if there is one. - - * camel-data-wrapper.c (camel_data_wrapper_construct_from_parser): - New method, construct a data wrapper from an initialised parser. - (construct_from_parser): Empty implementation. - - * providers/mbox/camel-mbox-summary.c (message_struct_new): - Convert subject line to unicode, before storing in the summary. - (strdup_trim): Removed, no longer needed. - - * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Ref - the folder after setting it in the new message. - - * camel-mime-part.c (my_set_content_object): Have the headers - follow the content-type change here too. - (my_write_to_stream): Dont write content-type here, automatically - stored in the headers ... - (my_write_to_stream): Use header_disposition_format() to format - the content-disposition header. - (my_write_to_stream): Removed old code, all headers are now stored - in the camel-medium level, always. Need to do the same with - camel-mime-message i suppose ... - (my_write_to_stream): Write the content using the parent class, - not some weird function. - (camel_mime_part_class_init): Dont override get_output_stream. - (camel_mime_part_encoding_from_string): Bleh, make it - case-insensitive. - - * camel-mime-utils.c (header_content_type_is): Handle empty types. - (header_encode_string): Start of an implementation of the rfc2047 - encoder. It does iso-8859-1, and us-ascii, and utf-8 (others get - tricky *sigh*) - (rfc2047_encode_word): Convert a single word/string into rfc2047 - encoding. - (quoted_encode): Different quoted-printable encoding for rfc2047 - encoding of headers. - - * gmime-content-field.c (gmime_content_field_write_to_stream): Use - header_content_type_format() to format it. - -2000-04-21 NotZed <NotZed@HelixCode.com> - - * camel-mime-utils.h: Add prototype for header_param_list_free. - - * camel-recipient.c: New function to remove all the types of a - recipient list. I think this whole object needs a major review. - - * camel-mime-message.c (camel_mime_message_class_init): Removed - parse_header_pair override, override add_header instead. - (_parse_header_pair): Renamed to add_header. - (remove_header): Add this method, to make sure we keep upto date - with removed headers too. - (_set_field): If given a NULL value, clear it out. - (_set_recipient_list_from_string): Constify. - (set_header): Override set_header from camel_medium. - (process_header): Local function to handle set/add/remove of each - header we know about. - - * camel-mime-part.c (camel_mime_part_class_init): Removed - parse_header_pair setup. - (my_parse_header_pair): Moved into add_header(), removed. - (my_set_disposition): Allow a NULL disposition to clear it. - (my_set_content_id): Allow NULL content id to clear it. - (remove_header): Track removed headers. - (my_set_description): Allow NULL description to clear it. - (my_set_content_MD5): Make sure we copy the md5 value, and allow a - NULL value to reset it. - (my_set_filename): Copy the filename. - (my_set_header_lines): Removed. Nothing uses it, it doesn't - actually serve any purpose. - (camel_mime_part_set_header_lines): Ditto. - (my_get_header_lines): Ditto. - (camel_mime_part_get_header_lines): Ditto. - (camel_mime_part_class_init): Remove *_header_lines setup. - (camel_mime_part_init): Remove header_lines init. - (my_finalize): Remove header_lines finalise. - (my_write_to_stream): Write the headers here. This is just WRONG, - camel_medium should be doing this. - (my_get_output_stream): Kill a warning. - (camel_mime_part_encoding_to_string): Ditto. - (camel_mime_part_set_description): Unvirtualiase, use add_header() - to do the processing. - (my_set_description): Removed. - (set_disposition): Renamed from my_set_disposition. - (camel_mime_part_get_description): Get the descriptionf rom the - get_header method. - (my_get_description): Removed. - (my_set_filename): Removed. - (camel_mime_part_get_filename): Get the parameter from the - disposition. - (camel_mime_part_encoding_from_string): Handle NULL string. - (camel_mime_part_init): Remove reference to filename. - (my_finalize): Dont free filename. - - * camel-mime-part.h (CamelMimePartClass): Removed - parse_header_pair() method, it doesn't add anything that - add_header() can't be used for. - (CamelMimePartClass): Remove *_header_lines methods. - (struct _CamelMimePart): Remove header_lines list. - (struct _CamelMimePart): Removed filename attribute. - - * camel-medium.c (camel_medium_init): Init headers to null, not a - hashtable. - (add_header): Append the headers as a list. - (remove_header): Remove headers as a list. - (get_header): Likewise for lookup. - (free_header): Removed, no longer needed. - (finalize): Free headers using header_raw_clear(). - (camel_medium_set_header): New function, to reset and override all - values of a header with a new value. - - * camel-medium.h (struct _CamelMedium): Changed to use a - header_raw struct rather than a hash table, to store headers - (many headers can occur multiple times). - - * camel-mime-utils.c (header_raw_find_next): New function, allows - you to find multi-valued header fields. - (header_disposition_format): New function to format/create - content-disposition header string. - (header_param_list_format_append): Function to format parameter - lists into a GString. - (header_content_type_format): Function to format content-type into - a usable format. - (header_set_param): allow NULL value to remove the parameter. - (decode_token): Renamed from header_decode_token. - (header_decode_token): New interface for external use. - (quoted_decode): Made static to kill annoying warnings. - (g_strdup_len): Killed, replaced with calls to g_strndup(). - (rfc2047_decode_word): Made static to kill warnings. - (decode_coded_string): Terminated. - (g_string_append_len): Made static to kill warnings. - (header_decode_text): Made static to kill warnings. - (header_decode_text): Constify. - (rfc2047_decode_word): Constify. - (header_param): Constify. - (header_content_type_new): Copy the type/subtype strings. - (header_param_list_decode): Made static. - (header_param_list_format_append): Made static. - (quoted_decode): Constify. - (g_string_append_len): Constify. - (header_token_decode): New function to decode a single token. - - * providers/mbox/camel-mbox-summary.c (header_write): Append a - trailing \n when writing headers. - (strdup_trim): Killed a warning. - (camel_mbox_summary_set_uid): Make sure the next uid is at least 1 - higher than any existing one. - (header_evolution_decode): Use header_token_decode to get the - token. - - * camel-mime-parser.c (folder_scan_header): Strip the trailing \n - of the end of all header lines. - -2000-04-20 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-utils.[ch]: Removed. - - * providers/mbox/camel-mbox-parser.[ch]: Removed. Removed - references to it. - -2000-04-20 Dan Winship <danw@helixcode.com> - - * camel-mime-utils.c (rfc2047_decode_word): use libunicode iconv - functions rather than libc ones (since libc might not have them). - (header_decode_date): add autoconfiscation on timezone code - - * camel.c (camel_init): call unicode_init () - -2000-04-20 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-summary.c (message_struct_new): Trim - leading/trailing spaces off the raw headers. - - * MERGE NEW_PARSER branch into HEAD, fixed conflicts. - - * gmime-content-field.c (_print_parameter): Duh, removed again - (@@#$@ cvs merge). - - * camel-mime-utils.c (header_content_type_is): Constify. - (header_content_type_unref): Killed a couple warnings. - - * camel-folder.c (_init): Removed more log crap. - - * providers/Makefile.am (SUBDIRS): Removed nntp, pending fixes for - summary changes. - - * providers/mbox/camel-mbox-folder.c (_get_message_by_number): - Fixed for new summary interface. Added a warning for using this - broken api. - (_get_message_by_uid): Fixed for message new with session - vanishing. - -2000-04-19 Dan Winship <danw@helixcode.com> - - * camel-simple-data-wrapper-stream.c - (camel_simple_data_wrapper_stream_get_type): This is a subtype of - CamelSeekableStream, not CamelStream. - - * camel-seekable-substream.c: clean up a lot. - (eos): When testing for end-of-stream, reset the parent position - before testing if it is at end-of-stream, since either (a) it may - have been seek'ed to eos by someone else, or (b) we may have been - seek'ed away from eos and it hasn't been synced yet. - - * camel-medium.[ch] (camel_medium_add_header): const poison. - (Belatedly goes with my change of 2000-02-23.) - (camel_medium_init): Use g_strcase_{hash,equal} on the header - array. - -2000-04-18 Dan Winship <danw@helixcode.com> - - * camel-mime-part.c (my_set_input_stream): - * camel-data-wrapper.c (set_input_stream, set_output_stream): do - better reference counting of streams so they actually go away - when they should. - - * camel-log.[ch], *: Nuke camel log stuff. Replace calls to - CAMEL_LOG_WARNING with calls to g_warning. - - * camel-data-wrapper.[ch]: - * camel-simple-data-wrapper.[ch]: - * camel-medium.[ch]: Clean, polish, document. Most of the gtk-doc - comments added to camel-data-wrapper.c note serious problems that - need to be fixed. - -2000-04-17 Dan Winship <danw@helixcode.com> - - * camel-mime-message.[ch]: Remove the "session" field from - CamelMimeMessage. Nothing uses it, about half of the existing - calls to camel_mime_message_new_with_session pass NULL, and - there's no obvious reason for it to be there. - - * providers/MH/camel-mh-folder.c: - * providers/maildir/camel-maildir-folder.c: - * providers/mbox/camel-mbox-folder.c: - * providers/mbox/camel-mbox-utils.c: - * providers/nntp/camel-nntp-folder.c: - * providers/pop3/camel-pop3-folder.c: Use camel_mime_message_new - instead of camel_mime_message_new_with_session. - - * camel-session.c (get_store_for_protocol_with_url): Set the - exception if no provider is found. - - * camel-url.c: Add code to encode and decode %-escapes in URLs, - and do some additional correctness-checking on URL syntax. From - Tiago Antào with modifications by me. - -2000-04-14 Chris Toshok <toshok@helixcode.com> - - * providers/Makefile.am (SUBDIRS): add nntp - -2000-04-14 Christopher James Lahey <clahey@helixcode.com> - - * providers/mbox/camel-mbox-folder.c: Fix switch statement. - -2000-04-14 Chris Toshok <toshok@helixcode.com> - - * providers/nntp/camel-nntp-folder.c (_exists): always return TRUE - for now. we need to check the server response to make sure the - group exists. - (_get_message_by_uid): make sure to account for the \n we add to - the string after every line. - - * providers/nntp/camel-nntp-utils.c (get_XOVER_headers): function - to get the headers using the XOVER command. - (get_HEAD_headers): function to get the headers using the HEAD - command on each message. slooooooow. - (camel_nntp_get_headers): make this function use either XOVER or HEAD - versions depending on whether or not the server extension is present. - -2000-04-14 Dan Winship <danw@helixcode.com> - - * camel-formatter.[ch]: This didn't belong in Camel. Move to mail/ - - * Makefile.am, camel-types.h: remove references to - camel-formatter. - -2000-04-12 Matt Loper <matt@helixcode.com> - - * camel-folder-pt-proxy.c (_folder_open_cb): Print warning message - for broken function. - (_folder_close_cb): Same. - -2000-04-12 Miguel de Icaza <miguel@gnu.org> - - * Makefile.am (pthread_SRC): Use correct names for the pthread - source variables. - -2000-04-10 Dan Winship <danw@helixcode.com> - - * providers/pop3/camel-pop3-store.c (pop3_connect): fix various - bugs in APOP code (still untested) and some of the error cases. - - * camel-provider.h: Clarify what provider.protocol, provider.name, - and provider.description should be. - - * providers/mbox/camel-mbox-provider.c: - * providers/pop3/camel-pop3-provider.c: - * providers/sendmail/camel-sendmail-provider.c: - * providers/smtp/camel-smtp-provider.c: update protocols, names, - and descriptions - - * providers/mbox/camel-mbox-folder.c (_get_message_by_number): - implement get_message_by_number for the mail fetch code. - -2000-04-09 Jeffrey Stedfast <fejj@stampede.org> - - * providers/smtp/camel-smtp-transport.c: reformatted to fit - the standard indent format used by helix code - -2000-04-09 Dan Winship <danw@helixcode.com> - - * camel-movemail.c: New file with new function to dot-lock an mbox - file and copy it to a safe private directory. - -2000-04-08 Christopher James Lahey <clahey@helixcode.com> - - * providers/smtp/.cvsignore: Added a .cvsignore file. - -2000-04-08 Dan Winship <danw@helixcode.com> - - * providers/sendmail/camel-sendmail-transport.c (_send_internal): - actually record the pid returned by fork(). Noticed by clahey. - - * providers/smtp/camel-smtp-transport.c: #include <sys/param.h> - for MAXHOSTNAMELEN. (This is a stopgap: some of the uses of - MAXHOSTNAMELEN are wrong anyway...) - -2000-04-07 Jeffrey Stedfast <fejj@stampede.org> - - * providers/smtp/camel-smtp-transport.c: fixes to numerous bugs; - should now build fine. - * providers/Makefile.am: Readded smtp now that smtp builds without - error. - -2000-04-20 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-summary.c - (camel_mbox_summary_next_uid): Public function to get the next - uid, makes sure its saved to disk too. - - * camel-mime-part.c (my_finalize): Fix disposition crap with a - real disposition. - (my_set_disposition): Likewise. - (my_get_disposition): And here. - (my_write_to_stream): And here, needs more cleanup. - - * providers/mbox/camel-mbox-folder.c (_append_message): Assign a - new uid at this point. - - * gmime-content-field.c (gmime_content_field_write_to_stream): - Make something up if we have an invalid/missing content type - (i.e. text/plain). - -2000-04-19 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-folder.c (_delete): Fixed completely - broken switch() syntax, only compiled because errno is a macro on - some systems. - (_list_subfolders): Likewise. - -2000-04-18 NotZed <NotZed@HelixCode.com> - - * camel-mime-parser.c (folder_scan_init): init stream to null. - - * providers/mbox/camel-mbox-summary.c - (CAMEL_MBOX_SUMMARY_VERSION): Moved to .c file, incremented. - (index_folder): Changed to have index passed via the summary. - (decode_string): Do a sanity check on the string size, so we dont - visit g_malloc()'s friendly abort(). - - * camel-folder-pt-proxy.c (camel_folder_pt_proxy_class_init): - Removed reference to set_name. - (_set_name): Removed. - - * providers/mbox/camel-mbox-utils.c - (parsed_information_to_mbox_summary): Removed. Most of this file - is about to be binned. - - * providers/mbox/camel-mbox-search.c (func_header_contains): Fixes - for changes to summary interface. - (struct _searchcontext): Remove pointer to message info, get it - straight from the mboxsummary. - (camel_mbox_folder_search_by_expression): New summary interface. - (camel_mbox_folder_search_by_expression): Uh, the summary is not - an object anymore (well not yet). - - * providers/mbox/camel-mbox-folder.c - (camel_mbox_folder_class_init): Removed set_name init. - (_set_name): Removed. - (_open): Call new summary interface. - (_close): Use new summary interface. - (_create): Removed a summary object leak. - (_get_message_count): New summary interface. - (_get_uid_list): Use new summary interface. FIXME: this is leaky. - (_get_message_by_uid): Use the new summary interface, some - cleanup. - (_append_message): Totally changed, basically just appends the - message directly, ignores the summary (for now), the summary will - fix itself up if it needs to. - (_check_get_or_maybe_generate_summary_file): Bye bye old code. - (summary_get_message_info): Implement get_message_info again, for - folder. - - * camel-folder.c (camel_folder_class_init): Removed set_name - setup. - (_set_name): Moved contents into _init. - (_init): Perform the old functions of set_name here. - - * camel-folder.h: Removed the set_name internal interface. - -2000-04-14 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-summary.[ch]: Completely replaced with - new code. - - * Makefile.am (libcamel_la_SOURCES): Removed - camel-folder-summary.[ch]. - - * camel-folder.h (struct _CamelFolder): Removed summary. - (struct _CamelFolder): Changed flags to be 1 bit bitfields. - - * camel-folder-summary.[ch]: Class removed entirely. - - * camel-folder.c (camel_folder_get_summary): Removed. - (camel_folder_summary_get_message_info): Moved from - camel-folder-summary.c - (camel_folder_summary_get_subfolder_info): Moved from - camel-folder-summary.c - - * camel-mime-parser.c (folder_scan_step): Store the start of - headers and start of from in the scan state. - (camel_mime_parser_tell_start_headers): Query the start of the - headers. - (camel_mime_parser_tell_start_from): Query the cached start of - from marker. - -2000-04-13 NotZed <NotZed@HelixCode.com> - - * gmime-content-field.c (gmime_content_field_free): Removed this - function. If its too dangerous to use, it shouldn't be here. - (gmime_content_field_ref): Also ref the embedded content-type. - (gmime_content_field_unref): Ditto to unref it. - - * camel-mime-utils.h: Add a refcount for content-type header. - - * camel-mime-utils.c (header_content_type_unref): Implement unref - for content-type. - (header_content_type_ref): Implement ref for header content type. - -2000-04-12 NotZed <NotZed@HelixCode.com> - - * gmime-content-field.h: Changed to use a _header_content_type. - Added type/subtype back for compatability with clients. - - * gmime-content-field.c: Basically a total rewrite, and now just a - thin wrapper ontop of header_content_type. - (_free_parameter): Got rid of it. - (gmime_content_field_new): Use header_content_type_* functions. - (gmime_content_field_set_parameter): Likewise. - (_print_parameter): Blow away. - (gmime_content_field_write_to_stream): Get details from the - content_type field. Should check if it needs to escape chars in - the paramter value. - (gmime_content_field_get_mime_type): Likewise. - (___debug_print_parameter): Get rid of this rather annoyingly - named function. - (gmime_content_field_get_parameter): Simplified function. - (gmime_content_field_construct_from_string): Fixed this to use a - real parser. - (gmime_content_field_is_type): New function to test if a type matches. - (gmime_content_field_construct_from_string): Track type/subtype - from subordinate content_type header struct. - - * gmime-rfc2047.[ch]: Removed. Unused. - - * camel-stream-b64.[ch]: Blown away more duplicated code. - - * Makefile.am: Removed camel-stream-b64.[ch], and - gmime-base64.[ch]. - - * camel-mime-part.c (my_get_content_object): Replaced - camel-stream-b64 with camel-stream-filter/camel-mime-filter-basic. - (my_write_content_to_stream): Replaced camel-stream-b64 with the - camel-stream-filter with an encoder. - (my_get_content_object): Also implement quoted-printable decoding. - (my_write_content_to_stream): Also implement quoted-printable - encoding. - (my_get_output_stream): Took out stream-b64 code (nothing's being - executed yet anyway). - - * gmime-base64.[ch]: Blown away. Not used, dont need it. - - * camel-mime-utils.h: Added offset for this header. Records where - it is in the source. - - * camel-mime-utils.c (header_raw_append_parse): Add offset - parameter, to store where the header is stored in the stream. - (header_raw_append): Added offset param. - (header_raw_find): Return offset, if a pointer supplied for it. - (header_raw_replace): Add offset param. - (header_content_type_new): New function, to create an empty - content type. - (header_content_type_set_param): Set a parameter in the - content-type. - (header_set_param): Generic header parameter setting function. - (header_decode_string): Handle NULL input. - - * camel-mime-parser.c (camel_mime_parser_headers_raw): New - function to get access to all the raw headers. - (folder_scan_header): Keep track of the header start position, and - store it when saving the header. - -2000-04-11 NotZed <NotZed@HelixCode.com> - - * camel-mime-utils.c: Moved a bunch of printf's to debug. - - * camel-mime-parser.c: Moved a bunch of printf's to debug. - (folder_scan_header): Detect end of each header line using the - last scanned char, and not the last scanned position. - - * camel-mime-filter-index.[ch]: Indexing filter. Indexes unicode - sequences into ibex files. - -2000-04-09 NotZed <NotZed@HelixCode.com> - - * camel-mime-part.c: Dont include gmime-base64.h - - * camel-mime-filter-charset.c (complete): Implement the completion - function. - - * camel-mime-parser.c (folder_scan_step): If we get to the end of - the body data, check any filters for outstanding completion data. - (camel_mime_parser_scan_from): Set whether we scan for "From " - headers or not. - - * camel-stream-filter.c (do_read): If we get to end of stream on - the source, then call the filtering completion function to see if - we have any more data to return. - - * camel-mime-filter-basic.c (filter): Implement quoted printable - encoding and decoding filters. - (complete): And the complete function as well. - - * camel-mime-utils.c (base64_encode_close): Also take an input - buffer, allow closing of filters. - (quoted_encode_step): First cut, simple quoted-printable encoder. - Doesn't handle trailing spaces/tabs on end of line properly yet. - (quoted_encode_close): Complete a quoted-encoding. - (is_qpsafe): New type check, for quoted-printable safe characters - (that do not need encoding). Thats all bits used in the type - table! Rebuilt the types table. - (header_content_type_is): Checks a content type against at - type/subtype match. - (header_content_type_param): Handle NULL content type pointer. - -2000-04-08 NotZed <NotZed@HelixCode.com> - - * camel-mime-filter-basic.c (filter): Implement the base64 - encoder. Problem is, there is no way to know when to close it. - Close/Reset will have to provide the same args as filter, so it can - flush remaining data *sigh* - - * camel-mime-utils.c (base64_encode_step): A rather complex base64 - encoder, fast? - (base64_step_close): Companion function to finish off the base64 - sequence. - - * camel-mime-part.c (my_write_content_to_stream): Changed to use - camel_stream_write_to_stream(). - - * camel-stream.[ch] (camel_stream_write_to_stream): From - camel_stream_b64_write_to_stream(). Fixed some infinite loop - bugs with error conditions. - - * camel-stream-b64.[ch] (camel_stream_b64_write_to_stream): Removed. - This has nothing to do with stream-b64, so i've moved it to - CamelStream. - - * camel-mime-utils.h: Add a comment about refcounting - header_content_type struct. - - * Makefile.am: Added camel-stream-filter*.[ch]. - - * camel-stream-filter.[ch]: Class to implement a generic - (multipass) filter ontop of a stream. Only implements a read-only - stream. - - * camel-mime-parser.c (camel_mime_parser_filter_add): Ref the - filter we just added. - - * Makefile.am: Added camel-mime-filter*.[ch]. - - * camel-mime-filter-charset.[ch]: A filter to preform character set - conversion (uses unicode_iconv). - - * camel-mime-filter-save.[ch]: A simple filter which will save all - data directly to a file or file descriptor. - - * camel-mime-filter-basic.[ch]: Implements the basic mime filters, - base64 and quoted-printable decoding (encoding not implemented yet). - - * camel-mime-filter.[ch]: A filtering class, which can filter streams - of data without having to copy them. Simpler than stream classes, - and can be plugged into a single stream class (when i write it). - -2000-04-07 Dan Winship <danw@helixcode.com> - - * providers/pop3/camel-pop3-store.c (pop3_connect): Clarify error - messages. - (finalize): fix a bug in camel_exception usage - (pop3_connect): Remember the password after asking for it the - first time. - -2000-04-07 NotZed <NotZed@HelixCode.com> - - * Makefile.am: Added camel-mime-parser/camel-mime-utils. - - * camel-mime-parser.c: Fast mime parser. - - * camel-mime-utils.c: Mime utility functions, and email header - parsers. - -2000-04-07 NotZed <NotZed@HelixCode.com> - - * providers/Makefile.am: Removed smtp for now, its a long way from - building. - * providers/smtp/Makefile.in: Removed file that shouldn't have been - checked in. - -2000-04-06 Matt Loper <matt@helixcode.com> - - * camel-folder-pt-proxy.c (_get_full_name): Remove exception param - from get_full_name() called, since get_full_name() was changed to - not have an exception in the last param (see dan's notes below). - (_get_name): same. - -2000-04-06 Dan Winship <danw@helixcode.com> - - * camel-store.[ch]: Reorganize the folder-fetching methods and - implement a folder cache so that multiple requests for the same - folder will yield the same CamelFolder object (as long as it - remains active). Includes some code to remove no-longer-active - folders from the cache, but it doesn't get used since nothing is - ever unref'ed in Camel right now... - - * providers/mbox/camel-mbox-store.c: - * providers/pop3/camel-pop3-store.c: update for CamelStore - changes. - - * camel-folder.[ch]: Remove the (unused) CamelException argument - from camel_folder_get_name and camel_folder_get_full_name. - (camel_folder_set_name): make this go away since changing a - folder's name after it has been created could result in it - conflicting with a separately-issued folder. - -2000-04-05 Dan Winship <danw@helixcode.com> - - * g_url_new really wanted to take a CamelException. So, rename - Gurl to CamelURL, g_url_* to camel_url_* (with camel_url_new - taking an exception), and url-util.[ch] to camel-url.[ch]. Also - force url->port to be numeric and remove camel_service_getport. (I - was confused before: the URL RFC says the port must be numeric, so - we don't want to do getportbyname.) - -2000-04-01 Dan Winship <danw@helixcode.com> - - * providers/mbox/camel-mbox-folder.c - (_check_get_or_maybe_generate_summary_file): Compare - mbox_file_size and mbox_modtime to the results of stat()ing the - mbox file, not the summary file. Duh. - (_close): Update the summary's mbox_file_size and mbox_modtime - before writing it to disk. - - * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_save, - camel_mbox_summary_load): Wow. I must have been tired when I wrote - this code. First, the comparison bug above. Second, it was using - ntohs and htons instead of ntohl and htonl. Third, I was reading - the status flag byte in two different places and thus getting out - of sync. Fourth, it was writing out field_length bytes of each - header field after having converted field_length to network byte - order, resulting in lots of random crap being appended, and the - summary files being huge. (Fortunately, since the size/modtime - comparison was biffed, the garbage summary read from disk was - always immediately discarded.) - - * providers/mbox/camel-mbox-parser.c (camel_mbox_parse_file): fix - an off-by-one error that caused the last-used UID to be reused if - the summary file was regenerated. (That one wasn't my fault. :-) - -2000-03-31 Dan Winship <danw@helixcode.com> - - * camel-stream-mem.c: implement unimplemented methods - - * gmime-content-field.c - (gmime_content_field_construct_from_string): - * data-wrapper-repository.c - (data_wrapper_repository_get_data_wrapper_type): - * camel-simple-data-wrapper.c (my_write_to_stream): - * camel-mime-part.c (my_set_input_stream): - remove debugging printf()s that no longer seem useful. - -2000-03-31 Matt Loper <matt@helixcode.com> - - * camel-formatter.c (text_to_html): Added "convert_newlines_to_br" - boolean param, to give the option of not converting '\n's to <br> - tags. This way, when we stick stuff in a <pre> tag, newlines stay - newlines. - -2000-03-30 Matt Loper <matt@helixcode.com> - - * camel-formatter.c (handle_text_plain): Use <pre> tag to force - the use of monospaced fonts. - -2000-03-30 Dan Winship <danw@helixcode.com> - - * camel-service.c (camel_service_getport): Add a htons in the - default_number case, and document the fact that the function - returns the port in network byte order. - - * providers/pop3/camel-pop3-store.c (pop3_connect): Revert - Miguel's change. The port number bug was actually somewhere - else, and the IP address copying code was fine already. - -2000-03-29 Miguel de Icaza <miguel@gnu.org> - - * providers/pop3/camel-pop3-store.c (pop3_connect): Add htons - (port), and only copy 4 bytes for the IP address to prevent a DNS - attack. - -2000-03-28 Dan Winship <danw@helixcode.com> - - * camel-seekable-substream.c - (camel_seekable_substream_new_with_seekable_stream_and_bounds): - make this return a CamelStream rather than a - CamelSeekableSubstream, because that's the way Gtk objects tend to - work. - - * camel-service.c (camel_service_gethost, - camel_service_getport): convenience functions to canonicalize - the host and port values of a service's URL. - * providers/pop3/camel-pop3-store.c: use them - - * providers/mbox/camel-mbox-folder.c - (_check_get_or_maybe_generate_summary_file): Make this work when - the inbox file doesn't yet exist. - -2000-03-27 Dan Winship <danw@helixcode.com> - - * providers/mbox/camel-mbox-folder.c (_append_message): uncomment - the call to unlink the temp file: there's no way to tell - camel_stream_fs to truncate a file, so reusing the same file was - resulting in junk at the ends of messages. - - * camel-folder.[ch]: add delete_message_by_{number,uid}. - - * providers/pop3/camel-pop3-folder.[ch]: implement - delete_message_by_uid. Add a close method to do expunging - of deleted messages if requested. - - * providers/pop3/camel-pop3-store.[ch]: support for - CamelPop3Folder::close. (You have to close the connection - in order to expunge the folder, thus the store may be - connected in the CamelService::is_connected sense when it - is not actually connected to the server.) Also some bugfixes. - -2000-03-27 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-folder.c (_append_message): Unref the - output_stream when done, close doesn't do it. - (_append_message): Clear all uid's from the appending messages, so - they are reassigned proper unique id's. - - * gmime-utils.c (get_header_array_from_stream): Actually free the - header, it is copied elsewhere. - -2000-03-26 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Added - folder parameter to function. Fixed callers. - (index_message): Index a message as it is assigned a unique id. - - * camel-mime-part.c (my_set_content_id): Make sure we malloc and - copy the content_id, otherwise *poof* - -2000-03-25 NotZed <NotZed@HelixCode.com> - - * camel-medium.c (_finalize): Another leak, unref the content if - finished with it. - - * camel-recipient.c (camel_recipient_table_free): Plug another - memory leak - actually free the recipient table. - - * camel-mime-message.c (_finalize): Plugged a memory leak with the - flags table. - - * gmime-utils.c (_store_header_pair_from_string): A simpler, more - debuggable and functionally identical header extraction function. - -2000-03-24 NotZed <NotZed@HelixCode.com> - - * gmime-content-field.c (gmime_content_field_set_parameter): - Remove the hash table entry before freeing its key and data. - -2000-03-27 Dan Winship <danw@helixcode.com> - - * providers/Makefile.am (SUBDIRS): Add pop3. - - * providers/pop3/camel-pop3-store.c: keep separate input and - output streams so the output doesn't end up being buffered. - - * providers/pop3/camel-pop3-folder.c (get_message_by_number): - finish implementing this. - -2000-03-27 Michael Meeks <michael@helixcode.com> - - * camel-mime-part.c (my_set_disposition): fix so less broken. - (my_finalize): remove dodgy disposition free. - - * camel-data-wrapper.c (my_set_mime_type_field): unref instead of - free on mime_type. - -2000-03-27 Dan Winship <danw@helixcode.com> - - * camel-service.c (camel_service_free_auth_types): new routine to - free the data allocated by camel_service_query_auth_types. - - * providers/pop3/camel-pop3-store.c (free_auth_types): implement - - * camel-stream-mem.c (camel_stream_mem_new_with_buffer): rename - camel_stream_mem_new_with_buffer to ..._with_byte_array and add a - new ..._with_buffer that takes a char * rather than a GByteArray. - - * Remove CamelStreamBufferedFs, since CamelStreamBuffer makes it - redundant. - -2000-03-25 Dan Winship <danw@helixcode.com> - - * camel-folder-summary.[ch]: change the CamelFolderSummary - interfaces to allow partial summary queries (for dealing - with very large folders). Remove the "extended_fields" from - CamelFolderInfo and CamelMessageInfo: this is better dealt - with by subtyping. - - * providers/mbox/camel-mbox-summary.[ch]: Make CamelMboxSummary a - subclass of CamelFolderSummary. Update interfaces for that. Remove - the internal/external summary distinction. Remove the (unused) md5 - checksum in the folder summary. Change the summary file format - (primarily to make it no longer byte-order dependent) and add a - version number to it so it will be easier to change in the future. - - * providers/mbox/camel-mbox-folder.[ch] - * providers/mbox/camel-mbox-search.c - * providers/mbox/camel-mbox-utils.c: update for summary changes - - * camel-exception-list.def: add - CAMEL_EXCEPTION_FOLDER_SUMMARY_INVALID - -2000-03-23 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-provider.c: Added flag to provider - initialisation, to match changed structure. - -2000-03-22 NotZed <NotZed@HelixCode.com> - - * camel-folder.[ch]: Added async search api. - - * providers/mbox/camel-mbox-search.c - (camel_mbox_folder_search_by_expression): Changed to use an - asynchronous interface. - (camel_mbox_folder_search_cancel): Cancel function for async - interface. - -2000-03-23 Dan Winship <danw@helixcode.com> - - * camel-stream-buffer.c (camel_stream_buffer_read_line): Function - to read one line of any size from a stream and return it in - allocated memory. - -2000-03-22 Dan Winship <danw@helixcode.com> - - * camel-service.c (camel_service_query_auth_types): New function - to query a service for the authentication protocols it supports. - * providers/pop3/camel-pop3-store.c (query_auth_types): implement - - * camel-provider.c (camel_provider_scan): New function to - scan the provider dir and return a list of all providers. - - * providers/pop3/camel-pop3-folder.c: fill this in partially - * providers/pop3/camel-pop3-store.c: make camel_pop3_command - return the text after "+OK"/"-ERR" and add a separate - camel_pop3_get_additional_data to get the message body or - whatever. Also make them take a CamelPop3Store rather than - a CamelStreamBuffer. - -2000-03-22 Matt Loper <matt@helixcode.com> - - * camel-formatter.c (debug): Disabled some useless debug - messaging. - -2000-03-21 Dan Winship <danw@helixcode.com> - - * providers/pop3: some initial bits of the POP3 provider, to - make Matt happy. Incomplete, untested, etc. - -2000-03-21 bertrand <bertrand@helixcode.com> - - * providers/mbox/camel-mbox-summary.c - (camel_mbox_summary_append_internal_to_external): copy the size field - - * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): initialize - message_info to NULL - - * camel-folder-summary.h: added the size field. - - * providers/mbox/camel-mbox-summary.h: - added the received_date field. - - * providers/mbox/camel-mbox-summary.c: - documented all functions. - - * camel-folder-summary.h: name change and - new fields. - - * providers/mbox/camel-mbox-search.c: update to - conform to name change in the summary fields. - -2000-03-10 bertrand <bertrand@helixcode.com> - - * camel-service.h: cosmetic changes. - -2000-03-09 Dan Winship <danw@helixcode.com> - - * s/HelixCode/Helix Code, Inc./ in the copyrights - -2000-03-07 bertrand <bertrand@helixcode.com> - - * camel-formatter.c (handle_mime_part): - plug mem leaks due to bad documentation - of camel_content_field_get_mime_type - (print_camel_body_part): idem - (handle_multipart_alternative): idem - - * gmime-content-field.c (gmime_content_field_get_mime_type): - documentation fix. - - - * camel-mime-part.c (my_finalize): unref the - content_input_stream if any. - -2000-03-06 bertrand <bertrand@helixcode.com> - - * camel-stream-fs.c (_seek): fix a bogus calculation - in the return position. - -2000-03-05 bertrand <bertrand@helixcode.com> - - * camel-session.h: cosmetic fixes. - - * camel-stream-fs.c (_read): - (_seek): fixed the current position so that it refers - to the current position in the stream, not in its parent. - -2000-03-04 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-search.c - (camel_mbox_folder_search_by_expression): Ref the summary - after we have got it. - -2000-03-04 bertrand <bertrand@helixcode.com> - - * camel-mime-part.c (my_write_content_to_stream): - stream the raw content instead of nothing if the encoding - is not supported. - - * camel-stream-fs.c (_seek): handle eos more - properly. - - * camel-formatter.c (get_bonobo_tag_for_object): - bonobo-goad-id is the good key to look for. - (get_bonobo_tag_for_object): close the <object> tag. - (get_bonobo_tag_for_object): the correct syntax for the - to set a parameter inside an <object> tag is : - <object classid="..."> <param name="uid" value="..."> <param ...> - </object> - -2000-03-03 bertrand <bertrand@helixcode.com> - - * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): - use set_input_stream instead of construct_from_stream - to feed the message object. - - * camel-data-wrapper.c (my_write_to_stream): reset output stream. - (my_set_input_stream): unref the previous input stream. - use the set_output_stream for default behaviour. - (my_set_output_stream): unref previous output stream. - - * camel-mime-part.c (my_write_content_to_stream): reset content - object output stream. - -2000-03-03 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Make - sure we open with create with a creation mask. - -2000-03-01 NotZed <NotZed@HelixCode.com> - - * camel-mime-part-utils.c - (camel_mime_part_construct_content_from_stream): DO NOT assert on - content type, we have fallback code 4 lines below it ... *sigh* - -2000-02-29 NotZed <NotZed@HelixCode.com> - - * Makefile.am (libcamelinclude_HEADERS): Added camel-stream-buffer - to build. - - * camel-stream-buffer.[ch]: Generic buffer which can be applied to - any stream. - -2000-03-03 bertrand <bertrand@helixcode.com> - - * camel-formatter.c (handle_image): in the case - of images, put the content object output stream - in the url. This allows the message browser - to show inline images. - - * camel-stream-b64.c (my_read_encode): fixed state - 0 keep value. - -2000-03-02 bertrand <bertrand@helixcode.com> - - * camel-stream-b64.c (my_read_encode): don't forget to - set the state to 0 after 3. - (my_read_encode): don't forget to encode, even in state 3. - - * camel-simple-data-wrapper.c: static functions are prefixed - with my_ instead of _ - * camel-multipart.c: static functions are prefixed - with my_ instead of _ - (my_write_to_stream): commented. - (my_write_to_stream): warning in case the boudary is set - but is a zero length string. - - * camel-mime-part.c (camel_mime_part_encoding_from_string): - remove debug trace. - - * camel-mime-part.c: Replaced all static functions - with name begining with _ by the same name begining - with "my_" to prevent the possible conflicts - with system symbols Dan warned us about. - - * camel-stream-b64.c (camel_stream_b64_write_to_stream): - use CamelStreamB64 type for the input stream. - - * camel-mime-part.c (_get_content_object): remove - debugging trace - (_write_content_to_stream): implement the b64 - encoding the new way (that is using camel_stream_b64) - - * camel-data-wrapper.c (my_write_to_stream): - fix implementation so that it writes properly - to the output stream even. - - * camel-stream-b64.c (camel_stream_b64_write_to_stream): - fix implementation. - -2000-02-29 bertrand <bertrand@helixcode.com> - - * camel-stream-b64.c (camel_stream_b64_write_to_stream): new - utility function. - - * camel-data-wrapper.c (_write_to_stream): default - implementation. - - * gmime-utils.c (_store_header_pair_from_string): - revert strange changes. - - * camel-stream-b64.c (my_read_decode): set eos to true when we - have read the whole input stream. - (my_reset): set eos to FALSE. - -2000-02-28 NotZed <NotZed@HelixCode.com> - - * camel-mime-part.c (_parse_header_pair): Dont free this either. - - * camel-medium.c (_remove_header): Ugh, dont free the header - before we actually remove it. - (_add_header): Ugh, dont free hashtable entries which may be - duplicated (hash_insert _will_ reference that memory). - - * string-utils.c (string_trim): Trimming a 0-length string is not - an error. - - * camel-mime-message.c (_parse_header_pair): Fixed very broken - memory handling of header_name/value. - - * providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): - Initialise end_of_last_message always. - (camel_mbox_copy_file_chunk): Stop trying to read if we run out of - data, rather than looping forever. - (camel_mbox_write_xev): Use an open flag when opening with create. - - * camel-folder.c (camel_folder_search_by_expression): No, its not - a fatal error to search on a non-searchable folder, you just dont - get any matches. - (_open): Dont open an opened folder (i dont see why this is really - a bug, but what the hell ...) - - * providers/mbox/camel-mbox-folder.c (_init): Set search cap on. - (_open): Call parent class to perform open. Remove folder-open - check to parent instead. - (_create): open takes a creation mask, dont use umask to try and - set the open mode. - (_delete): Dont bother checking folder==NULL, its already been - checked on the external interface (changed to an assertion, this - would have to be a camel bug). - (_delete_messages): Likewise. - (_create): Ditto. - (_init): Dont go and clear all the paths and shit that the parent - open just setup for us. - (_delete_messages): Get rid of more umask stuff. - (_append_message): Make sure we pass file mode to open with create. - (_append_message): Cleaned up some indenting to make it readable. - - * camel-stream-b64.c (my_read_encode): Fixed a typo. - - * providers/mbox/camel-mbox-search.c: Changed to use e-sexp, - rather than filter-sexp. - -2000-02-28 bertrand <bertrand@helixcode.com> - - * camel-stream-b64.c (my_read_encode): encoding - filter. - -2000-02-23 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel-stream-b64.c: changed the __static - suffix into a my_ prefix. - (camel_stream_b64_set_mode): reset the persistent - status. - (my_read_decode): remove superfluous % - - * providers/mbox/camel-mbox-utils.c (camel_mbox_copy_file_chunk): - fix exception description message. - -2000-02-24 Dan Winship <danw@helixcode.com> - - * camel-session.c: Add camel_session_get_transport_for_protocol. - - * camel-transport.h: - * camel-transport.c: Add an abstract CamelTransport class. - - * providers/sendmail/*: A CamelTransport that uses sendmail - to deliver mail. - -2000-02-24 Dan Winship <danw@helixcode.com> - - * camel-folder.c: use CamelExceptions for run-time errors, not - incorrect code. Don't bother validating that an object exists from - inside one of its methods, since you couldn't have gotten there if - it didn't. Fix some code style bugs. - - (_init): Rename init_with_store to init and add parent_folder, - separator, and name arguments. - (_set_name): Get separator from self, not parent_store now. - - * camel-store.h: - * camel-store.c: Remove get/set_separator. - - * providers/mbox/: Update for above. - -2000-02-23 Dan Winship <danw@helixcode.com> - - * camel-medium.c (_finalize): Free the data in the headers hash - table. - (_add_header): g_strdup the header name and value when adding it. - - * camel-mime-part-utils.c - (camel_mime_part_construct_headers_from_stream): Free the header - data after calling camel_medium_add_header, since it will have - g_strdup()ed it itself. - -2000-02-22 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-search.c: Dont compile by default. - - * providers/mbox/Makefile.am: Fuck off the filter code. - -2000-02-22 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel-stream-b64.c (read_decode__static): - don't read the char if we reached the length - of the output buffer. Hours lost on this - %$!@# bug : 3.5 - - * camel-folder.c (camel_folder_get_subfolder): - (camel_folder_create): - (camel_folder_delete): - (camel_folder_delete_messages): - (camel_folder_list_subfolders): - (camel_folder_expunge): - (camel_folder_get_message_by_number): - (camel_folder_get_message_count): - (camel_folder_append_message): - (camel_folder_copy_message_to): - (camel_folder_get_summary): - (camel_folder_get_message_uid): - (camel_folder_get_message_by_uid): - (camel_folder_get_uid_list): - Check folder state (open/close) and raise an - exception if it is not ok. - - * providers/mbox/camel-mbox-folder.c (_create): - create the file and the path with two different - names. - - * camel-folder.c (_create): handle the case - when the folder name starts with '/' - - * camel-exception.c (camel_exception_new): use - (void) instead of () in decl. - - * camel-exception.h: cosmetic fixes. - - * camel-exception.c (camel_exception_init): new routine. - Fix a bug in mail/message-list.c - - - * camel-folder.h: cosmetic changes. - - * camel-stream-b64.c (reset__static): added a - reset method. Thanks message-browser to find - so much bugs :) - - * providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): readd - Unicode libs. - -2000-02-21 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel-formatter.c (lookup_unique_id): - awful hack to test get_output_stream. - * camel-stream-b64.[ch] : - b64 encoding/decoding is now implemented as - a stream. - - -2000-02-21 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel-seekable-substream.c (_reemit_parent_signal): - emit "data_available" when parent stream emits it. - - -2000-02-21 NotZed <NotZed@HelixCode.com> - - * providers/mbox/Makefile.am: Uh, fixed LIBADD again. What was - there was never ever going to work, wasn't it tested? - - -2000-02-21 Dan Winship <danw@helixcode.com> - - * camel-session.h: (struct _CamelSession): Add authenticator. - - * camel-session.c (camel_session_new): Add authenticator. - (camel_session_query_authenticator): New function to query the - session authenticator for password, etc, information. - -2000-02-21 Dan Winship <danw@helixcode.com> - - * camel-session.c: add CamelExceptions to several functions. Use - camel_session_new to initialize the session and URL fields of - created CamelStores as appropriate. - - * camel-store.h: - * camel-store.c - * camel-service.h: - * camel-service.c: Move the session and url (and associated - functions) from CamelStore to CamelService. Add url_flags to - CamelService so subclasses can specify which URL components - are mandatory for them. Add camel_session_new for - camel_session_get_store* to use. - - * providers/mbox/camel-mbox-folder.c: - * providers/mbox/camel-mbox-store.c: - * providers/mbox/camel-mbox-store.h: Update for above changes. - - * camel-exception-list.def: Once camel is being used for real, - exceptions won't be renumberable. So renumber them now to make - more room to add exceptions to the various categories later, and - add a big warning message. - -2000-02-20 Dan Winship <danw@helixcode.com> - - * providers/mbox/Makefile.am: add libibex back to - libcamelmbox_la_LIBADD - -2000-02-18 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-search.h - (camel_mbox_folder_search_by_expression): Added exception to call, - and fixed caller. - - * providers/mbox/camel-mbox-search.c - (camel_mbox_folder_search_by_expression): Major changes, to use - the sexp evaluator from filter/filter-sexp.c to implement the - searching. - (func_body_contains): Changed to support multiple strings in 1 - command (results or'd together) - - * url-util.c (g_url_new): Fixed a typo (colon == 0 isn't right), - and made it so full url's are absolute pathed (Dan, this is how it - has to work!). Also, always include a path part, even if it is an - empty string. - -2000-02-18 Dan Winship <danw@helixcode.com> - - * camel/camel-types.h: New header with the typedefs for all camel - classes. Now the class headers can just include this and the - header for the parent type. This makes it possible for - CamelService to include a CamelSession without creating an - #include loop. - - * camel/*: - * composer/e-msg-composer-attachment-bar.h: - * mail/folder-browser.c: - * mail/message-list.c: frob #includes to match the new reality - -2000-02-17 Dan Winship <danw@helixcode.com> - - * camel/camel-service.h: - * camel/camel-service.c: Make camel-service us a Gurl internally. - Remove the login/password interfaces and instead provide - camel_service_connect_with_url. Add CamelExceptions - -2000-02-17 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/camel-formatter.c (handle_text_plain): - (handle_text_html): use camel_stream_reset instead - of seek. The formatter should be able to work - with all streams, not only seekable streams. - In the case where some provider implementation - would not be able to provide a reset method - to their stream, implementors would have - to find a workaround. - - * camel/camel-session.c (camel_session_new): use - (void) instean of () in function decl. - - * camel/camel-folder.c: ifdef async operation - related code. - - * camel/camel-seekable-stream.c (_seek): added a warning. - (_reset): default implementation of reset for seekable - stream. - - * camel/camel-mime-message.h: set_received_date declaration fix. - cosmetic changes. - - * camel/providers/mbox/camel-mbox-provider.c (camel_provider_module_init): - use (void) instead of (). - - * camel/camel-stream.c (camel_stream_reset): - new method for CamelStream. - -2000-02-17 Dan Winship <danw@helixcode.com> - - * camel/url-util.c (g_url_to_string): New function to convert - a Gurl back into a char *. - -2000-02-17 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/camel-formatter.c (handle_text_plain): - revamped so that it uses the output stream - of the data wrapper - (handle_text_html): ditto. - - - * camel/camel-simple-data-wrapper.h: - * camel/camel-simple-data-wrapper.c (camel_simple_data_wrapper_new): - use (void) instead of (). - (_get_output_stream): simple implementation. - -2000-02-16 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/camel-data-wrapper.c (_set_input_stream): ref input stream - (_set_output_stream): ref output stream - (_finalize): unref input and output streams - - * camel/camel-seekable-substream.c (_set_bounds): don't - seek the begining of the substream. - (_eos): fix eos condition testing. - (_finalize): unref parent stream - (_init_with_seekable_stream_and_bounds): ref parent stream - - * camel/gstring-util.c (g_string_equal_for_hash): - (g_string_equal_for_glist): return type is int. - - * camel/camel.h: - * camel/camel.c (camel_init): use (void) - instead of (). - -2000-02-16 NotZed <NotZed@HelixCode.com> - - * providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Added - libfilter to link line (temporarily?). Required for - filter-sexp. - -2000-02-15 bertrand <bertrand@helixcode.com> - - * camel/camel-multipart.c (_localize_part): - this routine replaces the _read_part routine - and does not store the part in a buffer. - (_set_input_stream): use the set_input_stream - instead of the construct_from_stream. - each bodypart is given an input stream. - - * camel/camel-mime-part-utils.c: - include the data-wrapper-repository header. - (camel_mime_part_construct_content_from_stream): - use the set_input_stream instead of the - construct_from_stream method. - - * camel/camel-seekable-substream.c (_set_bounds): - cur position is set to 0 not to inf_bound. - -2000-02-15 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/camel-mime-part.c: include gmime-base64.h - various compilation and runtime fixes. - (_set_input_stream): store the input substream - for the content object. - - * camel/camel-data-wrapper.h: declare the - set/get function on input/output stream. - - * camel/camel-mime-part.c (_get_content_object): - don't use a temporary mem stream. - - * camel/camel-seekable-substream.c (_seek): - (_eos): - (_read): the substream can be unlimited in length - - * camel/camel-data-wrapper.c (camel_data_wrapper_class_init): - set the get/set_input/output_stream methods. - - * camel/camel-multipart.c (_construct_from_stream): - camel_stream_seek -> camel_seekable_stream_seek - -2000-02-14 Miguel de Icaza <miguel@gnu.org> - - * camel/providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Add - the unicode libraries as well. - - * camel/camel-provider.c (camel_provider_register_as_module): Add - error reporting here. Desire to use Solaris increases. Hair loss - in the last two hours: 5,400. - - * camel/providers/mbox/camel-mbox-provider.c - (camel_mbox_get_provider): Renamed function. - - * camel/camel.h: All include files use camel/ now here. - - * camel/providers/mbox/Makefile.am: Drop all the dynamism from - Camel, and make this a standard library. - -2000-02-14 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/gmime-utils.c (get_header_array_from_stream): use the - eos stream method. - (gmime_read_line_from_stream): ditto. - - * camel/camel-stream-fs.h (struct ): add the eof field - cosmetics changes. - - * camel/camel-stream-fs.c (camel_stream_fs_init): set eof. - (_read): set eof on end of file. - (_eos): implemented. - - * camel/gmime-utils.c (get_header_array_from_stream): - make a blocking version of the header parser. - When the fs stream uses gnome-vfs, this should - be changed. - (gmime_read_line_from_stream): ditto. - -2000-02-11 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/camel-stream-fs.c: - everywhere, when using the cur_pos field, do it - on the CamelSeekableStream object. - (_seek): small fix. - - * camel/camel-seekable-stream.c (camel_seekable_stream_seek): - s/camel_stream_seek/camel_seekable_stream_seek/g - - * camel/camel-seekable-stream.h: - (struct ): added a field to store the - current position. - - * camel/camel-seekable-stream.c (camel_seekable_stream_get_current_position): - New function. Allows to get the current position - of a seekable stream. - - -2000-02-13 NotZed <notzed@zedzone.helixcode.com> - - * providers/mbox/camel-mbox-search.c: New file, implements the - search api for mbox folders. - - * providers/mbox/Makefile.am: Link with ibex. - - * camel-folder.c (camel_folder_has_search_capability): Api - additions. - (camel_folder_search_by_expression): Ditto. - -2000-02-12 NotZed <notzed@zedzone.helixcode.com> - - * providers/mbox/camel-mbox-folder.c (_set_name): Setup index - filename as well. - (_init_with_store): Init index filename. Hmm, none of these - names ever seem to get free'd (FIXME?) - - * providers/mbox/camel-mbox-folder.h: Add index file name. - -2000-02-12 NotZed <notzed@helixcode.com> - - * camel-folder.h: Add folder search functions. - - ** Created ChangeLog just for camel ** - - refer to ../ChangeLog for changes prior to this date. |