diff options
Diffstat (limited to 'camel/ChangeLog')
| -rw-r--r-- | camel/ChangeLog | 4842 |
1 files changed, 0 insertions, 4842 deletions
diff --git a/camel/ChangeLog b/camel/ChangeLog deleted file mode 100644 index ace0859687..0000000000 --- a/camel/ChangeLog +++ /dev/null @@ -1,4842 +0,0 @@ -2000-08-01 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/smtp/camel-smtp-transport.c (smtp_helo): When forced - to use the IP, place it in square brackets. - - * providers/imap/camel-imap-utils.c (imap_translate_sexp): New and - improved sexp parser. An honest try at using e-sexp is wrapped in - a #ifdef at the bottom of the file but is currently not used - - * providers/imap/camel-imap-folder.c (imap_search_by_expression): - We want to do a UID SEARCH so we get UIDs back instead of sequence - numbers - -2000-08-01 Not Zed <NotZed@HelixCode.com> - - * providers/mh: New mh provider implementation. - - * providers/Makefile.am (SUBDIRS): Added mh provider. - -2000-07-31 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_message_info_internal): - Some IMAP servers don't wrap the UID in ()'s so don't depend on that - (imap_get_summary_internal): Same - - * providers/imap/camel-imap-utils.c (free_sexp_node): Oops, forgot to - free node->function - not good. - -2000-07-31 Peter Williams <peterw@helixcode.com> - - * providers/vee/camel-vee-folder.c (vee_search_by_expression): Add - a NULL to the matches pointer array so that g_strfreev knows where - the end is. - -2000-07-31 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-utils.c (imap_translate_sexp): New - convenience function to translate a Camel sexp into the equivalent - IMAP sexp. - - * providers/imap/camel-imap-store.c: More places now use - imap_next_word - - * providers/imap/camel-imap-folder.c (imap_search_by_expression): - Implemented initial version (this may or may not work quite right) - -2000-07-28 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_expunge): Make sure - the third word/token (whatever) is "EXPUNGE" and not something - else like "EXISTS" or "RECENT". When removing the message from - the summary also make sure to free that data to avoid leakage. - Also make sure to subtract 1 from the 'id' since IMAP starts - at 1 and our summary starts at 0 :-) - -2000-07-28 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c (camel_imap_status): Cleaned - up a bit, now uses imap_next_word() - (camel_imap_command_extended): Now uses imap_next_word(). When - checking for RECENT, allow the first digit of the recent-count - be between 0 and 9 inclusive instead of exclusive. - - * providers/imap/camel-imap-folder.c (imap_expunge): Optimized. - No longer will it need to reload the summary as it now instead - removes the appropriate message summaries from the cache. - (camel_imap_folder_changed): If recent == 0 then return. If - recent < 0 then just emit the folder_changed signal, don't reload - summaries. - -2000-07-28 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c - (imap_get_message_count_internal): Get message count when STATUS - is not available. - (imap_init): folder->has_search_capability is required for IMAP so - should always be set to TRUE (is currently being set to FALSE as - I've not yet implemented SEARCH support). - (camel_imap_folder_changed): Seem to have fixed my optimization - hack - -2000-07-28 Jon K Hellan <hellan@acm.org> - - * providers/imap/camel-imap-store.h (CamelImapServerLevel): New - enum. - (CamelImapStore): Added server_level and has_status_capability - members. - - * providers/imap/camel-imap-store.c (imap_connect): Detect - IMAP4REV1, IMAP4 and STATUS in capability response. - - * providers/imap/camel-imap-folder.c - (imap_get_message_count_internal): Use STATUS only if server - supports it. TODO: Get message count when STATUS not supported. - (imap_get_message, imap_get_summary_internal, - imap_get_message_info_internal): Handle IMAP4 as well. - (imap_protocol_get_summary_specifier): New function: Make a data - item specifier for the header lines we need, appropriate to the - server level. - -2000-07-27 Peter Williams <peterw@helixcode.com> - - * camel-mime-utils.c (header_decode_lwsp): More - checks for end of string. - - * providers/imap/camel-imap-store.c: - (imap_command_extended): Free the elements of our - array (huge mem leak) - - * providers/imap/camel-imap-folder.c: - (summary_get_internal): Same as above. - - -2000-07-27 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (camel_imap_folder_changed): - Fixed my routine to only fetch new headers, my IDs were off by 1 - on the high end, so when it would fetch the last newly arrived - message it would fail and end up fetching all of the summaries - because of the corruption. - -2000-07-27 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-url.c (camel_url_to_string): If the path doesn't begin - with a / and there is a host, prepend a / to the path. - -2000-07-27 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/Makefile.am: Added camel-imap-utils.[c,h] - - * providers/imap/camel-imap-utils.[c,h]: Utilities for parsing - server responses for use in both camel-imap-store.c and - camel-imap-folder.c - - * providers/imap/camel-imap-folder.c (imap_get_summary_internal): - Free all the pointers in the headers array. - (imap_get_subfolder_names_internal): Updated to use - imap_parse_list_response - (imap_parse_subfolder_list): Removed in favor of - imap_parse_list_response - - * providers/imap/camel-imap-store.c (camel_imap_command_extended): - Free all the pointers in the data array. - (imap_connect): Updated to use imap_parse_list_response and fixed - a leak - (folder_is_selectable): Updated. - -2000-07-27 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_message_info): Now - uses a hash table for looking up message info rather than a linear - search :) - -2000-07-27 Peter Williams <peterw@helixcode.com> - - * providers/*/Makefile.am: Don't specify SUBDIRS = - [nothing]. Messes up distcheck. - -2000-07-26 Peter Williams <peterw@helixcode.com> - - * camel-mime-parser.c (folder_scan_init): Initialize - outbuf to be "" -- it's not guaranteed to be zeroed. - - * camel-mime-utils.c (header_references_decode): Return - if the header is NULL -> or "" <-. Don't do our stupid - mailer trick if we point to \0. - (header_decode_quoted_string): Don't rip past end of - string! - -2000-07-26 Dan Winship <danw@helixcode.com> - - * camel-movemail.c (movemail_external): routine to call an - external movemail program. - (camel_movemail): Nuke return value, use movemail_external when - available and useful, and don't delete "dest" on errors, since - it might have started non-empty. - -2000-07-26 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-url.c (camel_url_to_string): Should now always prepend a '/' - before the path if it doesn't already exist. - - * providers/imap/camel-imap-folder.c: Fixed a few compiler warnings - -2000-07-25 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_summary_free): Fixed the - real problem that Peter was running into. - -2000-07-25 Dan Winship <danw@helixcode.com> - - * camel-mime-message.c (write_to_stream): Don't add a Mime-Version - header to a message that already has one. - - * camel-internet-address.c (internet_encode): Don't put <>s around - addresses with no name part. - -2000-07-25 Peter Williams <peterw@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_expunge): Set - imap_folder->summary to NULL after calling imap_summary_free, - so we don't get stuck with a junk summary pointer. Should - we free it at all? - -2000-07-25 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (camel_imap_folder_changed): - Optimized to try and get the new message headers without reloading - the entire summary from scratch. - (imap_get_summary_internal): Will now sync() before attempting to - reload the summary so that flags are set in the reloaded summary - as well. - -2000-07-24 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c (get_folder): Updated to give - special attention to the root folder. - - * providers/imap/camel-imap-folder.c - (imap_get_subfolder_names_internal): Updated to handle the root - folder - (imap_get_message_count_internal): return 0 if folder can't hold - messages - (camel_imap_folder_new): Change so that root folder gets special - attention and always gets can_hold_messages set to FALSE - -2000-07-24 Dan Winship <danw@helixcode.com> - - * camel-folder.c: Remove exceptions from a number of methods that - work on what ought to be static data: get_parent_folder, - get_parent_store, get_message_count, get_unread_message_count, - get_permanent_flags, get_message_flags, set_message_flags, - get_message_user_flag, set_message_user_flag, get_uids, - get_summary, get_subfolder_names. Turn camel_folder_delete_message - into a macro. (Mostly a pull-up from the camel-async branch.) - - * providers/{imap,mbox,nntp,pop3,vee}: Update for CamelFolder - changes - -2000-07-24 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_message_info): Updated - to port easily to the new Camel API - (imap_init): Don't SELECT INBOX, we don't need to do that - -2000-07-24 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (camel_imap_folder_new): - Initialize the summary and subfolder listing. - (imap_summary_free): Now takes a GPtrArray arg rather than a - CamelImapFolder as it increases it's usefullness for free()'ing - temporary summaries. - (imap_get_message_count_internal): A new convenience function for - getting the actual message count on a server to be used by - imap_get_summary_internal) - (imap_get_message_count): Since the Camel API is on the move again, - the future version of this function will not be able to make a - call to the store, it must only access previously fetched data (thus - the creation of the _internal function) - (imap_get_subfolder_names_internal): Again, because the future version - of imap_get_subfolder_names will not take an exception, we must rename - this function which will be called by camel_imap_folder_new() - (imap_get_subfolder_names): We now return the previously collected - subfolder listing that the _internal function fetched previously - (imap_get_summary_internal): Again, same idea as the previous _internal - functions... - (imap_get_summary): Again... now returns a previously aquired summary - - * providers/imap/camel-imap-store.c (imap_noop): This will hopefully - prevent the imap store from disconnecting. - (imap_connect): Modified to add a gtk timeout event that will call - imap_noop() every 10 minutes (we may want to change this time value) - (imap_disconnect): Modified to remove the NOOP timeout event from the - store. - (camel_imap_command_extended): Commented out the code that would try - and detect if the store was disconnected and then reconnect if it was - needed. - -2000-07-24 Dan Winship <danw@helixcode.com> - - * camel-folder.[ch]: Remove camel_folder_get_message_uid, which - was not used, and not implemented by any provider. - - * providers/nntp/camel-nntp-folder.c: Remove get_message_uid - non-implementation. - - * camel-folder-pt-proxy.[ch], camel-arg-collector.c, - camel-marshal-utils.[ch]: Bye bye bye. - - * Makefile.am: remove reference to camel-arg-collector.c - -2000-07-23 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c (imap_disconnect): Made it a - little more forgiving. Also set current_folder to NULL as there is - no selected folder after a disconnect. - (stream_is_alive): Detects whether or not a socket is "alive" - (camel_imap_command_extended): Use stream_is_alive() to aid in the - detection of a disconnected state. - -2000-07-22 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c (get_folder): Clear - CamelExceptions when appropriate (eg when folder is marked as - \NoSelect). Still needs some cleanup and perhaps Dan will have a - better way of doing this as this seems like a messy way of - handling this. - - * providers/imap/camel-imap-folder.c (imap_get_uids): Took out - some debug statements as they are no longer needed. - -2000-07-21 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_subfolder_names): - Updated to not strip out subfolders that are marked as \NoSelect - because this will be correctly handled in store->get_folder from - now on. - - * providers/imap/camel-imap-store.c (folder_is_selectable): New - convenience function for use in get_folder(). - (parse_list_response): Now takes a char **flags argument which is - needed by folder_is_selectable(). - (imap_connect): Updated to reflect changes to - parse_list_response(). - -2000-07-21 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-stream.c (stream_read): Updated with - some of the same fixes I've made to camel-imap-folder.c like - recalculating message part lengths. - - * providers/imap/camel-imap-store.c (camel_imap_command_extended): - Rewrote the code to check for "* %d RECENT". Still needs to be - modified, but should no longer cause an infinite loop by detecting - mis-detecting RECENT messages. - -2000-07-20 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_summary): - (imap_get_message_info): Oops. Fix UID parser to allow 0 and 9 to - be in the range of valid UID chars. - -2000-07-19 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c: General cleanup working - towards getting Actions->Expunge working correctly. - - * providers/imap/camel-imap-store.c - (cammel_imap_command_extended): Added code to look for "* %d - RECENT" and to emit the folder_changed signal if there are any - recent messages. Note: this is a hack and needs to be rewritten - badly. - -2000-07-19 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_summary): If the - folder's message count is not the same as the number of summaries, - free the old summary and create a new summary. - -2000-07-18 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c - (camel_imap_folder_class_init): Added in - imap_[g,s]et_message_user_flag() methods - (imap_get_message_info): Rewrote to use the more efficient way of - downloading summary information and also added a UID comparison so - that if the UID requested doesn't match the UID received, it - returns NULL. FIXME: When the mailer gets NULL when it requested - message info, it seems that it displays a row for that message and - when you try and select the blank row, it segfaults. - - * providers/imap/camel-imap-store.c (get_folder): Oops, this - should not be checking against "/", it should be checking against - dir_sep. - - * providers/imap/camel-imap-folder.c (imap_parse_subfolder_line): - Updated to trim out the leading namespace. - (imap_get_subfolder_names): Let the subfolder parser trim the - namespace off the folder name. - -2000-07-17 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c (imap_disconnect): Send a - "LOGOUT" command. - - * providers/imap/camel-imap-folder.c (imap_get_message): Hacks to - get IMAP code to work with CommunigatePro and MS Exchange (and any - other servers that send back a UID at the end of each FETCH inside - of the main body of the message part). - (imap_sync): Un-#if 0 the code that sets the flags on the IMAP - server for messages that have changed. Oops, don't mask with - DELETED to find out if the message has been answered ;-) - (imap_expunge): sync before expunging. - -2000-07-16 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c: All SELECT calls now pass - a NULL folder argument to camel_imap_command_extended() since it's - not needed. - (imap_connect): Moved service_class->connect() to the point right - after a connection is established with the server rather than - waiting until the end of the function. - (camel_imap_command): Updated the documentation comment - (camel_imap_command_extended): Before sending a command, first - check to make sure we are connected; if we aren't, then reconnect. - Don't strncmp() command with "SELECT" as it's redundant. - - * providers/imap/camel-imap-folder.c: All SELECT calls now pass - a NULL folder argument to camel_imap_command_extended() since it's - not needed. Also s/camel_imap_command/camel_imap_command_extended as - I will probably be doing away with camel_imap_command() or at least - only using it for LOGIN and similar commands where the server won't - notify us of any recent messages. - -2000-07-15 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (camel_imap_folder_new): - One last fix to get rid of hard-coded "/" directory separators - -2000-07-14 Jeffrey Stedfast <fejj@helixcode.com> - - * string-utils.c (string_unquote): New convenience function - to unquote a string if it's encapsulated by "'s - - * providers/imap/camel-imap-folder.c: - * providers/imap/camel-imap-store.c: Made the necessary changes - to stop using hard coded directory separators. - -2000-07-13 Dan Winship <danw@helixcode.com> - - * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_load): - If the summary is for a smaller mbox, and rebuilding from the - last-known end position fails, try rebuilding from the beginning. - Deals with the case where the user edits the mbox and makes it - bigger, without adding new messages. - -2000-07-13 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c: - * providers/imap/camel-imap-store.c: If a SELECT fails, set - imap_store->current_folder to NULL so a SELECT is forced before - any message/folder operations are requested. Also, because some - users don't use a namespace, make sure that if the url->path is - "/" we don't use it when creating the folder_path. - (camel_imap_command[_extended]): Since we allow the passing of - a NULL folder which we can use to bypass a forced SELECT, no need - to check for the individual commands that don't require a folder - to be selected. - -2000-07-13 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c: - * providers/imap/camel-imap-store.c: Updated to use CAMEL_IMAP_OK, - CAMEL_IMAP_NO, CAMEL_IMAP_BAD, and CAMEL_IMAP_FAIL rather than the - ones copied from the POP3 provider. - -2000-07-13 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_summary): Oops. - If the number of messages in the folder is 0, don't fetch - summaries 1 thru 0, just return an empty summary. - (imap_copy_message_to): Fixed to use message UID and also send - the source folder as an arg to camel_imap_command rather than NULL. - (imap_move_message_to): Same. - (imap_init): If SELECT is successful, we need to set the current - folder to the one selected, this was causing problems with move/copy - -2000-07-13 Dan Winship <danw@helixcode.com> - - * camel-service.h: define a set of CAMEL_SERVICE_URL_ALLOW_* flags - parallel to the _NEED_* flags, and make the _NEED_* flags imply - the _ALLOW_* ones. - - * providers/imap/camel-imap-store.c (camel_imap_store_init): imap - urls ALLOW_PATH - -2000-07-13 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_summary): New - and improved approach to fetching an entire folder summary - that should be much much faster than the old way as it gets - the entire folder summary in 1 shot rather than requesting - message by message. As with the last update, this version - also only fetches the minimum number of header fields. - (imap_get_summary): Oops, forgot to free the temp - GPtrArray *headers - -2000-07-13 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_summary): Don't - fetch the entire RFC822 header, just fetch the fields we want. - (imap_get_message_info): Same. - -2000-07-13 Not Zed <NotZed@HelixCode.com> - - * camel-mime-filter-basic.c (camel_mime_filter_basic_new_type): - Reset filter on setup. - (reset): When resetting qp encoding, set the state to -1, instead - of 0. - - * camel-mime-utils.c (quoted_encode_step): Actually count the - characters output sofar (it never counted any). Bunch of other - fixes. - (quoted_encode_close): Also flush out final character, if there's - one. - -2000-07-12 Jeffrey Stedfast <fejj@helixcode.com> - - Chris forgot to add #include <e-util/e-util.h> to the source files - - * providers/imap/camel-imap-store.c (imap_connect): Fixed Peter's - fix, we don't want to send a string to a %d. - -2000-07-12 Christopher James Lahey <clahey@helixcode.com> - - * camel-folder-search.c, providers/imap/camel-imap-store.c: - Changed from strstrcase to e_strstrcase. - - * string-utils.c, string-utils.h: Removed strstrcase (in favor of - e_strstrcase in e-util/e-util.c.) - -2000-07-12 Chris Toshok <toshok@helixcode.com> - - * providers/nntp/camel-nntp-folder.c - (nntp_folder_set_message_flags): get the article num out of our - uid and mark it read in the newsrc. - (nntp_folder_get_message): get the message id out of the uid to - fetch the article. - - * providers/nntp/camel-nntp-utils.c (get_XOVER_headers): the uid - is now <article-num>,<messageid> - (get_HEAD_headers): same. - - * camel-mime-parser.c (folder_scan_step): go to HSCAN_MESSAGE - state when ct->subtype is "news" as well as "rfc822". this makes - attachments of type "message/news" display properly. - -2000-07-12 Dan Winship <danw@helixcode.com> - - * camel-folder.c (camel_folder_free_deep, - camel_folder_free_shallow, camel_folder_free_nop): Useful default - implementations for free_{uids,subfolder_names,summary}. - (free_subfolder_names, free_uids): Make these g_warning-ing - default implementations. - - * providers/*/camel-*-folder.c: Use the new functions where - appropriate, remove duplicated code. - -2000-07-12 Peter Williams <peterw@helixcode.com> - - * providers/imap/camel-imap-store.c (query_auth_types): Check for - NULL parameters when setting the exception so as to not crash on - Solaris (can't handle a %s passed NULL). - (imap_connect): Same. - -2000-07-12 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/mbox/camel-mbox-folder.c (mbox_delete_message): Use - mbox_set_message_flags () instead of setting the flags by hand. This - fixes the problem of the "message_changed" signal not being emitted - at the correct time. - - * providers/imap/camel-imap-folder.c: "folder_changed" signals should - pass a third argument (which is ignored). - - * camel-folder.c: Undo gtk signal emits done in set_flags and - expunge. - (move_message_to): - (copy_message_to): Create info as a const CamelMessageInfo - -2000-07-12 Chris Toshok <toshok@helixcode.com> - - * providers/nntp/Makefile.am: don't add test-newsrc to the build - since it needs libcamel (which isn't built at the time test-newsrc - needs linking.) - - * providers/nntp/camel-nntp-utils.c (get_HEAD_headers): fill in - MessageInfo->message_id. - (get_XOVER_headers): same. - - * providers/nntp/camel-nntp-folder.c (nntp_folder_init): move - summary loading here. - (nntp_folder_sync): summary/newsrc changes should be stored here. - put a comment to that effect. - (nntp_folder_set_message_flags): don't save the newsrc here. - (nntp_folder_get_uids): use g_ptr_array_index instead of the - cast/addition. - (nntp_folder_get_summary): no need to check if we should generate - the summary here. already done. - (nntp_folder_get_message_info): implement. - - * providers/nntp/camel-nntp-store.c - (camel_nntp_store_get_toplevel_dir): use evolution_dir instead of - computing it ourselves. - (nntp_store_disconnect): call camel_nntp_newsrc_write. - (ensure_news_dir_exists): new function to create the news/<news - server> subdir. - (camel_nntp_store_class_init): hook up connect/disconnect and - finalize. - (nntp_store_connect): if ensure_news_dir_exists fails throw an - exception. - -2000-07-12 Peter Williams <peterw@helixcode.com> - - * camel-folder.c (camel_folder_set_message_flags): Emit a message_changed - signal once the flags are set on the message. - (camel_folder_set_user_flag): Ditto. - (camel_folder_expunge): Emit a folder_changed if no exception. - -2000-07-12 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-stream.c: Use size_t and ssize_t for read/write methods - - * providers/imap/camel-imap-folder.c (imap_set_message_flags): - Updated to emit the message_changed signal. - (imap_delete_message): Updated to use imap_set_message_flags (). - (imap_move_message_to): Updated to use imap_set_message_flags () - and to emit the folder_changed signal on the destination folder. - (imap_copy_message_to): Updated to emit the folder_changed signal - on the destination folder. - (imap_append_message): Updated to emit the folder_changed signal - on the destination folder. - -2000-07-11 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-folder.c (camel_folder_append_message): Now takes a - flags argument to specify the flags to be set on the message - since we might not necessarily want the flags to be wiped clean. - (move_message_to): - (copy_message_to): Updated to send a flags argument to - append_message (); currently sends the original message's flags. - - * providers/mbox/camel-mbox-folder.c (mbox_append_message): - * providers/imap/camel-imap-folder.c (imap_append_message): - Updated. - -2000-07-11 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_search_by_expression): - This shouldn't return NULL, it should return g_ptr_array_new () - so the mailer gets what it expects. - -2000-07-10 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-folder-summary.c (camel_folder_summary_decode_string): - Oops, an unsigned integer can never be < 0 - -2000-07-10 Dan Winship <danw@helixcode.com> - - * providers/vee/camel-vee-folder.c (vee_search_by_expression): - Initialize a variable to make this not crash again. And fix a bug - so it actually does something. - -2000-07-10 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-folder-summary.c: Cleaned up a bunch of compile warnings - -2000-07-10 Dan Winship <danw@helixcode.com> - - * providers/vee: kill more debugging messages - -2000-07-10 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/mbox/camel-mbox-folder.c (mbox_get_unread_message_count): - * providers/vee/camel-vee-folder.c (vee_get_unread_message_count): - * providers/imap/camel-imap-folder.c (imap_get_unread_message_count): - Implemented. - - * camel-folder.c (camel_folder_get_unread_message_count): New - convenience function to allow the mailer to query the number - of unread messages in a folder (for displaying message stats - in a folder tree?). - -2000-07-09 Dan Winship <danw@helixcode.com> - - * camel-mime-utils.c (header_references_dup): New function to copy - a header_references structure. - - * camel-folder-summary.c (camel_message_info_dup_to): New function - to (deep) copy the data from one CamelMessageInfo into another. - (camel_message_info_free): And free the data. - - * providers/vee/camel-vee-folder.c (vee_sync): Implement. (empty). - (vee_search_by_expression): belatedly update for - camel_folder_search change. - (vee_folder_build): belatedly update for camel_folder_search - change. Use camel_message_info_dup_to and camel_message_info_free - (in particular, so that we get message_id and references info so - vfolders can be threaded). - (vee_folder_build_folder): Ditto. - -2000-07-08 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/nntp/camel-nntp-folder.c: - * providers/nntp/camel-nntp-utils.c: - * providers/nntp/camel-nntp-store.c: Update to reflect past changes - in the Camel API. Use gtk macro casts wherever possible and use glib's - memory functions instead of standard c's (since they are not - compatable) - - * providers/smtp/camel-smtp-transport.c: - * providers/imap/camel-imap-store.c: Wrap debug print statements - in a macro - - * providers/imap/camel-imap-stream.c (stream_read): Make sure - that we get up to and including the last \n of the mime part. - - * providers/imap/camel-imap-folder.c (imap_get_message): Make sure - that we get up to and including the last \n of the mime part. - Wrap debug print statements in a macro. - - * providers/imap/camel-imap-stream.c (stream_read): Only cache - the important data (aka the mime part requested and no extra - server response stuff) - -2000-07-07 Dan Winship <danw@helixcode.com> - - * camel-mime-utils.c (header_references_decode): Work around - In-Reply-To's with unquoted punctuation. So many broken mailers. - - * camel-folder.c (camel_folder_search_by_expression): Make this - return a GPtrArray rather than a GList. - - * camel-folder-search.c (camel_folder_search_execute_expression): - * providers/imap/camel-imap-folder.c (imap_search_by_expression): - * providers/mbox/camel-mbox-folder.c (mbox_search_by_expression): - * providers/nntp/camel-nntp-folder.c (nntp_search_by_expression): - Update to return a GPtrArray rather than a GList. - -2000-07-07 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/smtp/camel-smtp-transport.c (esmtp_get_authtypes): - Fixed the parser to actually work - -2000-07-06 Dan Winship <danw@helixcode.com> - - * camel-mime-utils.c (header_references_decode): Make this deal - with the full RFC822 References/In-Reply-To format rather than - just the more-nicely-behaved RFC1036 version. (Needed to parse - In-Reply-To headers with extra junk in them.) - -2000-07-06 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_summary): Parse for - more header information to allow message threading in IMAP. - (imap_get_message_info): Same. - - * camel-folder-summary.c: Renamed summary_format_* to - camel_summary_format_* and moved them into public scope. - - * providers/smtp/camel-smtp-transport.c (smtp_connect): Oops. Don't - pass port # as a string in the error code (if it fails to connect). - - * providers/imap/camel-imap-folder.c (imap_append_message): Changed - over to camel_imap_command_extended as that was the source of the - problems - apparently appending replies with more than just 1 line. - -2000-07-05 Dan Winship <danw@helixcode.com> - - * camel-folder-search.c (search_header_contains): make header - matching case-insensitive - - * camel-folder-summary.c: - * camel-session.c: - * providers/mbox/camel-mbox-folder.c: - * providers/mbox/camel-mbox-summary.c: Remove some non-error case - debugging-type messages. - -2000-07-05 Ettore Perazzoli <ettore@helixcode.com> - - * providers/mbox/camel-mbox-summary.c (d): Define to empty so that - we get rid of a ton of debugging messages. - -2000-07-05 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-mime-utils.h: Added prototype for uudecode_step - - * camel-mime-utils.c (uudecode_step): Cleaned up some junk that - should have been cleaned up when debugging printf's were taken out. - -2000-07-05 Ettore Perazzoli <ettore@helixcode.com> - - * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_sync): - Update the X-Evolution: header even if the in-memory UID and the - saved UID are not the same. Otherwise mboxes with clashing UIDs - can never be fixed. - - * camel-folder-summary.c - (camel_folder_summary_add_from_parser): Add the message to the - summary before doing any ibex stuff. In fact, this might also - have the side effect of reassigning the UID so it needs to be done - before we start using the UID. - - * providers/mbox/camel-mbox-folder.c (mbox_append_message): Add - debugging message to keep track of the UIDs we add. - -2000-07-05 Dan Winship <danw@helixcode.com> - - * camel-folder-summary.c: Add "Cc" to summary and bump summary - version number. - - * camel-folder-search.c (search_header_contains): make "Cc" a - searchable header. - -2000-07-03 Ettore Perazzoli <ettore@helixcode.com> - - * camel-folder-summary.c (camel_folder_summary_next_uid_string): - New. - (camel_folder_summary_add): Use - `camel_folder_summary_next_uid_string()' instead of recomputing - the UID manually here. - (camel_folder_summary_add_from_parser): Likewise. - -2000-07-03 Ettore Perazzoli <ettore@helixcode.com> - - * camel-folder-summary.c (camel_folder_summary_set_uid): Removed. - -2000-07-03 Dan Winship <danw@helixcode.com> - - * camel-folder-summary.c (message_info_new): Parse In-Reply-To - with header_references_decode, not header_msgid_decode. - - * camel-mime-message.c (camel_mime_message_class_init): message - headers are case-insensitive. - - * providers/pop3/camel-pop3-store.c (camel_pop3_command): Fix a - bug in error-setting code. - (pop3_connect): Don't re-prompt for password in the KPOP case. - (pop3_get_response): New function, split out from - camel_pop3_command. - (connect_to_server): Use pop3_get_response to parse the greeting - message, and error out appropriately if it's -ERR. - -2000-07-02 Dan Winship <danw@helixcode.com> - - * camel-folder.c (camel_folder_freeze, camel_folder_thaw): New - functions to freeze and thaw a folder (to prevent message/folder - changed signals in the middle of a long series of operations). - (camel_folder_class_init): Change signals to GTK_RUN_FIRST. - (message_changed, folder_changed): Add default implementations - that stop the emission and record info for later if the folder is - frozen. - - * providers/mbox/camel-mbox-folder.c (mbox_sync): leftover fixes - from the close->sync change: don't destroy the ibex, summary, and - search when syncing. - (append_message): emit "folder_changed" on a successful append. - -2000-07-02 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-mime-utils.c (uudecode_step): A rather complex uudecoder - written in the spirit of Zucchi-ness, is it up to par? Only the - Z-man can tell us :-) - -2000-07-01 Dan Winship <danw@helixcode.com> - - * camel-service.c (camel_service_get_name): New method, to return - an end-user-friendly name corresponding to a service. (eg, "POP - service for danw on trna.helixcode.com"). - - * providers/imap/camel-imap-store.c, - providers/mbox/camel-mbox-store.c, - providers/nntp/camel-nntp-store.c, - providers/pop3/camel-pop3-store.c, - providers/sendmail/camel-sendmail-transport.c, - providers/smtp/camel-smtp-transport.c: Implement. - - * providers/imap/Makefile.am: remove unneeded - libcamelimap_la_LDADD. - - * providers/pop3/camel-pop3-store.c (connect_to_server): fix the - CAPA-parsing code to not get into an infinite loop. - -2000-07-01 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_message): Fixed - the bug that would sometimes leave part of the server response - tacked on to the end of the message. - - * camel-folder.c: Renamed _by_uid methods. Since we no longer - have get-by-number methods, no need to have the _by_uid - extensions. - (get_message_by_uid): Renamed to get_message - (delete_message_by_uid): Renamed to delete_message - (summary_get_by_uid): Renamed to get_message_info - - * providers/mbox/camel-mbox-folder.c: - * providers/pop3/camel-pop3-folder.c: - * providers/imap/camel-imap-folder.c: - * providers/vee/camel-vee-folder.c: Updated to reflect - camel-folder changes. - -2000-06-30 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-folder.c (camel_folder_copy_message_to): New function, to - copy a message from one folder to another. The default - implementation just uses append_message, but providers can - implement more efficient versions for use when both folders are on - the same store. - - * broken-date-parser.[c,h]: Utilities for parsing broken - date strings. - - * providers/imap/camel-imap-folder.c (imap_move_message_to): - (imap_copy_message_to): Implemented. - - * camel-mime-utils.c (header_decode_date): Wrote some code to try - and un-mangle broken date formats and then parse that new string - instead. - -2000-06-30 Dan Winship <danw@helixcode.com> - - * camel-folder.c (camel_folder_move_message_to): New function, to - move a message from one folder to another. The default - implementation just uses append_message and delete_message, but - providers can implement more efficient versions for use when both - folders are on the same store. - -2000-06-29 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_expunge): Should now - print a meaningful error message when it doesn't succeed - -2000-06-28 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c (imap_connect): Changed to - keep prompting user for a valid password until it either - authenticates or until Canceled by the user. - (camel_imap_command_extended): Improved speed (replaced the - g_strjoinv call with a faster implementation) - - * providers/pop3/camel-pop3-store.c - (camel_pop3_command_get_additional_data): Fixed. - (pop3_connect): Changed to keep prompting the user for a - password until it either works or until Canceled by the user. - - * providers/mbox/camel-mbox-summary.c: General cleanup - (camel_mbox_summary_sync): Fixed a memory leak and added - CamelException handling. - - * providers/mbox/camel-mbox-store.c (delete_folder): Fixed a - memory leak - - * providers/mbox/camel-mbox-folder.c (mbox_append_message): - Default 'off_t seek' to -1 so as to make sure it's initialized - before it's used in the case of a bad stat() call. - (mbox_sync): Updated - (mbox_expunge): Updated - -2000-06-27 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c (imap_connect): Move the - CAPABILITY command here so we don't have to keep checking - each time we open a folder. - (camel_imap_command_extended): If we are doing an EXAMINE, - don't bother doing a SELECT first. - - * providers/imap/camel-imap-folder.c (imap_init): Update so - folder->has_search_capability depends on the parent IMAP store - (since this is really dependant on the IMAP implementation and - not the folder) - -2000-06-27 Christopher James Lahey <clahey@helixcode.com> - - * providers/smtp/camel-smtp-transport.c: Don't close the filter - stream when done with it (this causes the source stream to close); - Instead, just flush it when done. - -2000-06-27 Michael Zucchi <zucchi@zedzone.mmc.com.au> - - * camel-folder-search.c (search_header_contains): Make header - search 'to' match 'to', and not 'from', small typo, fixes #317. - -2000-06-26 Christopher James Lahey <clahey@helixcode.com> - - * providers/mbox/camel-mbox-summary.c: Added debugging - information. - -2000-06-23 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c: - * providers/imap/camel-imap-folder.c: Improved folder parsing. - Not specifying a namespace should no longer list the entire - filesystem. - -2000-06-22 Chris Toshok <toshok@helixcode.com> - - * providers/nntp/.cvsignore: ignore test-newsrc - - * providers/nntp/camel-nntp-store.c, - providers/nntp/camel-nntp-store.h, - providers/nntp/camel-nntp-folder.c, - providers/nntp/camel-nntp-folder.h, - providers/nntp/camel-nntp-utils.c: Bring the nntp provider up to a - state where it builds and is usable with the current camel. there - are still warts (semi-broken .newsrc file handling, and a lack of - a subscribe ui -- in fact no way to add a new server, really), but - it'll display news messages. - - * providers/nntp/Makefile.am (libcamelnntp_la_SOURCES): add - camel-nntp-newsrc.c - (libcamelnntpinclude_HEADERS): add camel-nntp-newsrc.h - also, add test-newsrc stuff. - - * providers/nntp/test-newsrc.c: new file that tests the newsrc - stuff by parsing and regurgitating a .newsrc file for a particular - server. - - * providers/nntp/camel-nntp-newsrc.c, - providers/nntp/camel-nntp-newsrc.h: new files, initial support for .newsrc files. - -2000-06-22 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_message_count): - Oops. Now appends the namespace to the folder before querying - for the number of messages. - - * providers/imap/camel-imap-store.c (imap_folder_exists): New - convenience function for use by imap_create(). - (get_folder): If folder is specified as "/", we really want - "INBOX". - - * providers/sendmail/camel-sendmail-provider.c: - * providers/vee/camel-vee-provider.c: - * providers/smtp/camel-smtp-provider.c: - * providers/mbox/camel-mbox-provider.c: - * providers/pop3/camel-pop3-provider.c: - * providers/imap/camel-imap-provider.c: Updated - - * camel-session.c: Moved service_cache hash table into the - providers. - (service_cache_remove): Updated. - (camel_session_get_service): Updated. - - * camel-url.c (camel_url_hash): Took out the hashing of - url->passwd. We don't want this anymore. - - * providers/imap/camel-imap-folder.c (imap_init): Took out - references to 'namespace' - (camel_imap_folder_init): Same - - * providers/imap/camel-imap-folder.h: No more namespace. We are - instead going to use url->path as the namespace. - -2000-06-21 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c (imap_create): Modified to - use the "namespace" (url->path) if it exists. - - * providers/imap/camel-imap-folder.c (imap_delete_message_by_uid): - Now just sets the deleted flag on the summary rather than speaking - directly to the IMAP server. This is both faster and cleaner. - -2000-06-21 Dan Winship <danw@helixcode.com> - - * providers/pop3/camel-pop3-store.c (query_auth_types): Fix dumb - bug. - -2000-06-21 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_message_by_uid): - We are getting mail in IMAP now!! whoo-hoo!. Stripped out the - filtering so messages may have some dot-stuffing, but the - filtering can always be added back in later when we know it - works and isn't the problem. - -2000-06-21 Peter Williams <peterw@curious-george.helixcode.com> - - * providers/mbox/camel-mbox-folder.c (mbox_init): Use the basename - of the mailbox so we don't get pathnames like ~/evolution/inbox///movemail.ibex - -2000-06-21 Dan Winship <danw@helixcode.com> - - * camel-folder-summary.c (message_info_new): Set date_received - based on the first (most recent) "Received" header. - -2000-06-20 Dan Winship <danw@helixcode.com> - - * camel-mime-part.c (write_to_stream): flush the filter stream - before unreffing it, so it will camel_mime_filter_complete. - - * camel-stream-filter.c (camel_stream_filter_class_init): Fix a - braino so camel_stream_flush works here. - - * camel-stream-mem.c (stream_seek): Fix a bug that resulted in - large attachments being silently dropped. - - * providers/pop3/camel-pop3-store.c - (camel_pop3_command_get_additional_data): Don't use g_strjoinv - here, since it is O(n^2) on the length of the output string, and - we can do O(n). - - * camel-mime-part-utils.c - (simple_data_wrapper_construct_from_parser): add a CRLF decoder - after the QP/B64 decoder if it's text. - -2000-06-20 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_summary): Only - fetch the summary if the folder summary doesn't already exist. - When the summary *does* exist, start fetching from 1, not 0. - (imap_free_summary): Don't do anything here. - (imap_finalize): Free the summary here instead of in - imap_free_summary(). - (imap_set_message_flags): Implemented - (imap_sync): Added code to set flags on messages that have had - their flags changed (however I #if'd it out until we are more - confidant in the IMAP code :) - (imap_summary_get_by_uid): Now parese flags correctly. - (imap_get_summary): Now parese flags correctly. Also correctly - parses the UID correctly. - - * camel-url.c (check_equal): No need to check s1 if s2 is NULL - (camel_url_equal): Don't check the passwd component of the url. - -2000-06-20 Dan Winship <danw@helixcode.com> - - * camel-folder-summary.c (camel_folder_summary_add): mark the - message info with CAMEL_MESSAGE_FOLDER_FLAGGED if we change the - uid, so the folder will know that it's dirty. - -2000-06-20 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c (camel_imap_command_extended): - Now returns the last line of data that the server sends back as - well. This is needed for commands like SELECT (like Peter pointed - out). - (camel_imap_command): No longer checks for SELECT (no need) - - * providers/imap/camel-imap-folder.c: Added namespace stuff - which we will need later on... - (imap_parse_subfolder_line): Convenience function for use in - get_subfolder_names() - (imap_get_subfolder_names): Updated. Also changed it to use LIST - instead of LSUB (temporary change). - -2000-06-19 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (camel_imap_folder_init): Set - summary equal to NULL. - (imap_get_summary): Store the summary in the ImapFolder - (imap_summary_get_by_uid): If we have a summary cache in the - ImapFolder, first check to see if that message info is in the - cached summary first, if not fetch it directly from the IMAP - server and append it to the summary cache. - (imap_get_message_flags): Don't free the message info that we get - back from summary_get_by_uid as we don't want to be corrupting our - cached summary. - -2000-06-19 Peter Williams <peterw@curious-george.helixcode.com> - - * providers/imap/camel-imap-store.c (camel_imap_command{,_extended}): When - SELECT'ing a folder for an IMAP command, use _extended to grab the entire - response (before we just used camel_imap_command and missed the OK codes) - -2000-06-18 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_summary_get_by_uid): - Now gets the message flags as it should. - (imap_get_summary): Same as imap_summary_get_by_uid - (imap_get_permanent_flags): Return the permanent flags stored - on the folder. - (imap_get_message_flags): Return message flags associated with - given uid. Note: we may want to somehow cache summary info so - that we don't have to keep querying the IMAP provider in - imap_summary_get_by_uid(). - -2000-06-17 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_free_summary): We were - leaking memory - but not anymore! - (imap_get_summary): We now get the UIDs and the beginnings of the - code to get the message flags as well. - -2000-06-17 Dan Winship <danw@helixcode.com> - - * camel-mime-parser.c (folder_scan_header): Don't copy newlines - into the parsed header text, and turn any number of tabs and - spaces after a newline into a single space. - -2000-06-17 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_init): Should now - correctly do CAPABILITY. - -2000-06-17 Dan Winship <danw@helixcode.com> - - * providers/mbox/camel-mbox-summary.c: Add some debugging printfs - when rebulding summary to help figure out why people's summaries - are always being rebuilt. - -2000-06-17 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_search_by_expression): - Began to implement, need to get information on how to - deconstruct @expression into an IMAP search expression and - parse the results. - (imap_init): Now queries the IMAP provider for CAPABILITY to - determine if SEARCH is implemented or not. - - * providers/imap/imap.c: Removed - no longer a need to have - this as an example for anyone interesting to help mecode IMAP - support. - -2000-06-16 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_sync): Added code - to expunge if called for (still need to finish coding this). - (imap_get_uids): Implemented. - (imap_get_summary): Found a way to get the date - (imap_summary_get_by_uid): Same. - (imap_free_summary): Implemented. - - * string-utils.c (strstrcase): Fixed a compile warning - - * providers/imap/camel-imap-summary.c: Removed - we don't - need a CamelImapSummary structure. - -2000-06-16 Dan Winship <danw@helixcode.com> - - Move flag handling from CamelMimeMessage to CamelFolder. This - simplifies several flag-handling pieces of code in the mailer, and - lets you change a message's flags without having to fetch the - message body. It also means that fully-constructed - CamelMimeMessages are now essentially constant, which will help - simplify locking issues later since it means two threads - interested in the same message can just work with separate copies - of it. - - * camel-mime-message.h (struct _CamelMimeMessage): Removed flags - and user_flags (moved to summary). Removed expunged and - message_number which were unused. Removed message_uid and folder - which are no longer needed in the new scheme. - (struct CamelMimeMessageClass): Removed message_changed signal and - get/set_message_number methods. - - * camel-mime-message.c: Updates for CamelMimeMessage changes. - (camel_mime_message_get/set_flags, - camel_mime_message_get/set_user_flag): Replaced with methods in - CamelFolder. - (camel_flag_get, camel_flag_set, camel_flag_list_size, - camel_flag_list_free): Moved verbatim to camel-folder-summary.c - - * camel-folder.c (camel_folder_get/set_message_flags, - camel_folder_get/set_message_user_flag): New methods (and - corresponding useless default implementations) - (camel_folder_class_init): add a message_changed signal - - * camel-folder-summary.c (camel_flag_get, camel_flag_set, - camel_flag_list_size, camel_flag_list_free): Moved here from - camel-mime-message.c - - * providers/mbox/camel-mbox-folder.c (message_changed): Removed. - (mbox_get_message_flags, mbox_set_message_flags, - mbox_get_message_user_flag, mbox_set_message_user_flag): Tweak - summary bits as appropriate. (Functionality moved here from - message_changed.) - (mbox_get_message_by_uid): Update for CamelMimeMessage changes - (less stuff to initialize). - - * providers/imap/camel-imap-folder.c (message_changed): Remove - this. It was just copied from the mbox provider and doesn't deal - with the real IMAP flag stuff anyway. (So there's currently no - flag support in the IMAP provider.) - (imap_get_message_by_uid): Update for CamelMimeMessage changes. - - * providers/vee/camel-vee-folder.c: (message_changed): Remove old - one. Add a new one to listen for message_changed on each folder - and re-emit message_changed signals that correspond to messages in - the vfolder. - (vee_get/set_message_flags, vee_get/set_message_user_flag): Proxy - flag setting to the underlying real messages. - (vee_append_message): Removed for now; there's no way to translate - this into the new CamelMimeMessage/CamelFolder scheme, but (a) - there's also no code which would ever call it and (b) we're - probably going want a better interface than append_message for - message drag and drop to work anyway. To be revisited. - -2000-06-16 Dan Winship <danw@helixcode.com> - - * camel-mime-utils.c (rfc2047_decode_word): - * camel-mime-part-utils.c (simple_data_wrapper_construct_from_parser): - * camel-folder-summary.c (summary_build_content_info): - KLUDGE! Since neither ETable nor GtkHTML supports UTF-8 yet, - output ISO-8859-1 instead, so Ettore can read his Italian mail. :) - This will be reverted later. - -2000-06-15 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_summary): Started to - implement - may want to use ENVELOPE instead of BODY.PEEK[HEADER] - (imap_summary_get_by_uid): Started to code, I've got to find a way to - get the date in time_t format and also get the flags - - * string-utils.c (strstrcase): Added this convenience function - I - know about strcasestr() but it's not portable. - -2000-06-15 Dan Winship <danw@helixcode.com> - - * camel-service.c: Remove camel_service_connect_with_url. (URLs - must be specified when the service is requested from the session, - so that there can only ever be one service for any URL.) - - * camel-folder.c: (camel_folder_open, camel_folder_is_open, - camel_folder_get_mode): Kill. Folders are now always open, and - handle "closing" sorts of operations at sync or finalize time. - (camel_folder_sync): renamed from camel_folder_close. Syncs state - to the store but doesn't necessarily close/disconnect. - - * providers/*/camel-*-folder.c: Merge "open" methods into "init" - methods. Rename close to sync and update appropriately. - - * providers/imap/camel-imap-store.c: Remove camel_imap_store_open - and camel_imap_store_close, which should not have been copied from - the POP provider (where the exist to work around limitations of - the POP protocol). - - * providers/mbox/camel-mbox-summary.c: fix a bug. (don't expunge - deleted messages if called with expunge == FALSE) - - * providers/pop3/camel-pop3-store.c (connect_to_server): Check - server for various interesting extensions. - - * providers/pop3/camel-pop3-folder.c (get_uids): If the server - supports UIDL, use real UIDs rather than fake ones. - (etc): Map uids back to numbers appropriately - - * providers/mbox/camel-mbox-folder.c (mbox_append_message): Fix to - previous change: make sure the "seek" variable ends up with the - value it should. - - * providers/mbox/camel-mbox-summary.c (summary_rebuild): Update - summary mtime as well as size. - -2000-06-14 Dan Winship <danw@helixcode.com> - - * providers/mbox/camel-mbox-folder.c (mbox_append_message): if the - mbox doesn't end with a '\n', write one before appending the new - message. - -2000-06-14 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-mime-filter-crlf.c (filter): Updated the encoder to allocate - more memory (since we are also now adding dots). Also updated the - decoder as we have found that it sometimes passes the end of the - buffer. - - * providers/pop3/camel-pop3-folder.c (get_message_by_uid): Took out the - filter code (we already filter in - camel_pop3_command_get_additional_data) - - * camel-folder.c (init): Updated: a separator is now a char* rather - than a single char because IMAP can have a string for a directory - separator. Also, since IMAP does not begin with a directory separator, - there is a new argument (path_begins_with_sep) which decides if a - directory should begin with a directory separator. - - * providers/imap/camel-imap-store.c (imap_create): Since, on connect, - Camel tries to create INBOX (which already exists on every IMAP - provider) we can return TRUE when the folder name is "INBOX". - - * providers/vee/camel-vee-folder.c (vee_init): Updated. - - * providers/imap/camel-imap-folder.c (camel_imap_folder_new): Updated. - - * providers/mbox/camel-mbox-store.c (get_folder): Updated. - - * providers/mbox/camel-mbox-folder.c (mbox_init): Updated. - - * providers/pop3/camel-pop3-folder.c (camel_pop3_folder_new): Updated. - -2000-06-14 Dan Winship <danw@helixcode.com> - - * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_sync): - Renamed from camel_mbox_summary_expunge. Takes a gboolean saying - whether to expunge or just sync the mbox file. Change some - g_errors to g_warning so we don't abort. Make the quick - X-Evolution updating code lseek around correctly. Update the - mbox mtime in the summary file even in the quick case. - - * providers/mbox/camel-mbox-summary.h: make - CAMEL_MESSAGE_FOLDER_NOXEV not conflict with - CAMEL_MESSAGE_FOLDER_FLAGGED defined in camel-mime-message.h - - * providers/mbox/camel-mbox-folder.c (mbox_close): call - camel_mbox_summary_sync to save flag state if not expunging. - (mbox_expunge): Update for camel_mbox_summary_expunge rename. - -2000-06-13 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c (camel_imap_store_open): - (camel_imap_store_close): Added. - (camel_imap_command_extended): Fixed a segfault and updated - to use camel_imap_status() - (camel_imap_command): Updated to use camel_imap_status() - (camel_imap_status): New convenience function for parsing - the return status of an IMAP command - -2000-06-12 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c (imap_get_message_by_uid): - Works like the POP fetch code, should work temporarily until - we get around to coding it the way it "Should Be". - - * providers/pop3/camel-pop3-folder.c (get_message_by_uid): Now uses - the camel-mime-filter-crlf decoder when retrieving messages. - - * camel-mime-filter-smtp.c: Deprecated. - - * providers/smtp/camel-smtp-transport.c (smtp_data): Updated to use - camel-mime-filter-crlf with my 'dot' extension in place of - camel-mime-filter-smtp - - * camel-mime-part.c (write_to_stream): Updated to reflect changes - made to camel-mime-filter-crlf.c - - * camel-mime-filter-crlf.c (filter): Modified to be able to - encode/decode dots ("\n.\n"<->"\n..\n"). Also fixed the decoder - so that it should no longer get caught in an infinite loop. - -2000-06-12 Dan Winship <danw@helixcode.com> - - * providers/*/Makefile.am: don't pass a second (incorrect) -rpath - in addition to the (correct) one automatically provided by - automake. - - * camel-mime-filter-crlf.c: New filter to do CRLF<->LF conversion. - (Currently only tested in the LF->CRLF direction.) - - * camel-mime-part.c (write_to_stream): if content-type is text, - and it's QP or B64 encoded, pass through the CRLF filter before - the other filter to satisfy the "canonical encoding" rules in the - MIME spec. - -2000-06-09 Dan Winship <danw@helixcode.com> - - * camel-session.c (camel_session_query_authenticator): Add another - argument, "mode", which can be CAMEL_AUTHENTICATOR_ASK or - CAMEL_AUTHENTICATOR_TELL, so callers can get the app to un-cache - bad info. - - * providers/pop3/camel-pop3-store.c (pop3_connect): uncache the - password if it doesn't work. - -2000-06-09 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-stream.c (stream_read): Updated to reflect - changes made in camel-imap-store.c - - * providers/imap/camel-imap-store.c (imap_create): No longer checks to - make sure a folder doesn't already exists (as this is no longer needed) - (camel_imap_command): Now takes a CamelFolder argument so it can detect - whether or not it needs to SELECT a folder or not - (camel_imap_command_extended): Same. - - * providers/smtp/camel-smtp-transport.c (smtp_connect): Will now always - send EHLO first, if that fails it will fall back on HELO. - (esmtp_get_authtypes): Should now correctly parse authtypes. - -2000-06-07 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-summary.c: Now builds (not that it's worth - much yet). - - * providers/imap/camel-imap-folder.c (imap_get_uids): Now uses the - correct cast to a CamelImapMessageInfo structure (should get rid of - compile warnings). - - * providers/imap/Makefile.am: Added rules to build - camel-imap-stream - - * providers/imap/camel-imap-store.c (get_folder): Update. - Moved imap_create here. - - * providers/imap/camel-imap-folder.c (delete_messages): Remove. - (imap_create): Removed. - (imap_delete): Removed. - (imap_exists): Removed. - - * providers/imap/camel-imap-stream.h: Added typedef's for the stream - - * providers/imap/camel-imap-stream.c: Modified to build cleanly - -2000-06-07 Not Zed <NotZed@HelixCode.com> - - * camel-mime-utils.c (header_msgid_decode_internal): Properly - dereference warning/debug messages. - (header_references_decode): Check we actually have msgid stuff - before trying to decode it ... - -2000-06-06 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-imap-stream.[c,h]: Removed - - * providers/imap/camel-imap-stream.[c,h]: Relocated to this - location - - * providers/imap/camel-imap-summary.c: Added - -2000-06-06 Dan Winship <danw@helixcode.com> - - * camel-folder.c: Remove exists, create, delete. A CamelFolder - now always references an existing folder. Remove delete_messages - too since it wasn't being used. Add a "create" flag to - get_subfolder saying whether or not to create the subfolder if it - doesn't yet exist. - - * camel-store.c (camel_store_get_folder): Add a "create" flag to - say whether or not to create the folder if it doesn't yet exist. - (camel_store_delete_folder): New method, moved from CamelFolder. - (cache_folder, uncache_folder): Fix up a bit. - (get_folder_name): Explain what this is for. - - * providers/mbox/camel-mbox-folder.c: - * providers/mbox/camel-mbox-store.c: Update. Remove support for - hierarchical folders to simplify this for now, since we're not - using it, and it's not completely clear how they should work in an - ELocalStorage world. Needs to be revisited. - - * providers/pop3/camel-pop3-folder.c (delete_messages): Remove. - * providers/pop3/camel-pop3-store.c (get_folder): Update. - - * providers/vee/camel-vee-folder.c (exists): Remove. - * providers/vee/camel-vee-store.c (vee_get_folder): Update. - -2000-06-06 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-*.[c,h]: Started on getting - imap to build cleanly (tho some work has not been completed - so it still won't build until camel-imap-summary is finished - along with a few methods in camel-imap-folder) - - * camel-stream.[c,h]: Changed the read and write method prototypes - to return an ssize_t type rather than an int and also changed - the 'number of bytes' to read or write to a size_t type - - * camel-stream-fs.c: same as above - - * camel-stream-mem.c: again, same as above - - * camel-stream-buffer.c: same - - * camel-imap-stream.[c,h]: Added this new stream, cache's previously - read data so each successive call will instead read from the cache - -2000-06-05 Dan Winship <danw@helixcode.com> - - * camel-mime-part.c (camel_mime_part_set_disposition): fix - typo/braino (set "Content-Disposition", not "Content-Description") - (camel_mime_part_set_filename): const poison - -2000-06-02 Not Zed <NotZed@HelixCode.com> - - * camel-mime-utils.c (base64_encode_step): Ick, damn signs! Fix a - bug with sign extended bytes. - - * camel-mime-filter-smtp.c (filter): Changed layout/logic slightly - (to match From filter) - -2000-06-02 Jeffrey Stedfast <fejj@helixcode.com> - - * camel-mime-filter-smtp.c (filter): Fixed the filter so that it - wouldn't insert garbage under certain conditions. - -2000-06-02 Christopher James Lahey <clahey@helixcode.com> - - * camel-session.c: Don't ref the services in the cache. - -2000-06-02 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/smtp/camel-smtp-transport.c: Rearanged where debug - fprintf statements we placed so that any data the server sends - back is printed out before an exception is set and the function - returns. - -2000-06-02 Not Zed <NotZed@HelixCode.com> - - * camel-mime-utils.c (header_decode_date): If we get a funny - result, just throw it out. Basically a fix for the one true - broken TradeClient. - -2000-06-01 Not Zed <NotZed@HelixCode.com> - - * camel-folder-summary.c (message_info_free): Free - references/messsage id. - (message_info_save): Save them. - (message_info_load): Load them. - (message_info_new): And get them from the new message. - (CAMEL_FOLDER_SUMMARY_VERSION): Bumped for new changes. - - * camel-folder-summary.h: Added references and messageid to - summary. - -2000-06-02 Christopher James Lahey <clahey@helixcode.com> - - * camel-session.c: Ref and unref objects in the service cache - properly. - - * camel-store.c: Ref the folder when returning it using - lookup_folder. Used the folder's full name for the key for the - folder cache since that's used to uncache it. - -2000-06-02 Dan Winship <danw@helixcode.com> - - Fun with purify. - - * providers/pop3/camel-pop3-store.c (pop3_connect): free msg on - success as well as failure. - (camel_pop3_command_get_additional_data): free buf after reading - the last line ("."). - - * providers/pop3/camel-pop3-folder.c (get_message_by_uid): free - body data after creating the memstream from it (which will copy - the data). - - * providers/mbox/camel-mbox-folder.c (mbox_finalize): free summary - and index paths. - - * camel-data-wrapper.c (finalize): unref the stream, if it exists. - -2000-06-01 Not Zed <NotZed@HelixCode.com> - - * camel-mime-part.c (construct_from_parser): For a message part, - set the default content-type to message/rfc822. Maybe needs to be - done for multiparts too? - -2000-05-31 Not Zed <NotZed@HelixCode.com> - - * camel-mime-message.c (construct_from_parser): Typo in assersion. - - * camel-mime-parser.c (folder_scan_step): Use a default type of - message/rfc822 for multipart/digest. Bug Z192. - (folder_scan_drop_step): Remove warning. - -2000-05-30 Not Zed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-folder.c (mbox_append_message): Init - filter_from to NULL, for exception case. - (mbox_get_message_by_uid): Cast off_t to long int for diagnostics. - - * camel-url.c (camel_url_hash): Hash funciton for using camel - url's as hash keys. - (camel_url_equal): equal function for same. - - * camel-session.c (camel_session_finalise): Free cached services. - (camel_session_init): Init service cache. - (service_cache_remove): destroy callback to remove a service from - the cache. - - * camel-store.c (get_folder_internal): Remove the extra ref of the - folder. That seems the right behaviour ...? - (camel_store_get_type): Doh, actually call store init, so the - cache works. - (cache_folder): strdup the folder name! no wonder it never found - it again. - -2000-05-30 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-folder.c: Implemented a few more - methods like imap_append and 1 or 2 others - -2000-05-29 Not Zed <NotZed@HelixCode.com> - - * camel-store.c (camel_store_init): Move it to here. If this - level is going to maintain it, it should set it up. Lets see what - caching folders breaks :( - - * providers/pop3/camel-pop3-store.c (camel_pop3_store_init): Dont - init folder cache here. - - * providers/mbox/camel-mbox-summary.c - (camel_mbox_summary_expunge): Make sure we copy messages which are - still intact to the new folder. - (camel_mbox_summary_expunge): Update the frompos as well when - moving the content. - (camel_mbox_summary_expunge): Remove some debug, and dont offset - frompos? - - * providers/vee/camel-vee-folder.c (vee_folder_build): Check the - searched folder is open before trying to search it. - (message_changed): Track changes to the source message in the - summary. - (folder_changed): Track folder changes, re-query the folder that - changed, and cascade the changed event as well. - (camel_vee_folder_finalise): Free subfolder and subfolder summary. - -2000-05-29 Dan Winship <danw@helixcode.com> - - * camel-service.c (camel_service_new): Fix up some glib - precondition stuff. Try to set the URL in camel_service_new before - checking whether or not it's "empty" so that you can successfully - set "sendmail:" as a URL. - -2000-05-28 Dan Winship <danw@helixcode.com> - - * camel-provider.h: Add a domain field to CamelProvider, to say - what kind of data it provides. - - * providers/imap/camel-imap-provider.c: - * providers/mbox/camel-mbox-provider.c: - * providers/pop3/camel-pop3-provider.c: - * providers/sendmail/camel-sendmail-provider.c: - * providers/smtp/camel-smtp-provider.c: Set domain to "mail". - - * providers/nntp/camel-nntp-provider.c: Set domain to "news". - - * providers/vee/camel-vee-provider.c: Set domain to "vfolder". (So - it doesn't end up being listed as a potential mail source in the - mail config wizard.) - - * providers/pop3/camel-pop3-store.c: Split apart password and APOP - auth, since some servers seem to do both, but don't really. - (connect_to_server): Renamed from try_connect. Now actually does - the connection up to the point of checking the greeting for APOP - support. - (query_auth_types): Return APOP, if appropriate. Call - pop3_disconnect after connect_to_server since we don't really want - to be connected. - (pop3_connect): Use connect_to_server rather than duplicating - code. Fix a one-byte buffer overrun in the APOP code. - (pop3_disconnect): Make this able to clean up after a partial - connect. - (connect_to_server): Remove port number from error message since - it's not terribly useful and we were getting it from the wrong - place anyway. - - * camel-mime-utils.c (header_address_list_format_append): Use - `foo@bar' rather than `"" <foo@bar>' for email addresses with no - name component. - -2000-05-27 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c: Removed - camel_imap_command_get_additional_data() as it was - completely useless, replaced with - camel_imap_command_extended() which may eventually replace - camel_imap_command() as well. - - * providers/imap/camel-imap-store.h: Modified to reflect - changes made to camel-imap-store.c - - * providers/imap/camel-imap-folder.c: Wrote the first of many - methods: camel_imap_init(), imap_open(), imap_expunge(), - imap_get_message_count(), and imap_get_subfolder_names() - -2000-05-26 Dan Winship <danw@helixcode.com> - - * camel-multipart.c (camel_multipart_init): Don't set a default - boundary. Require the caller to do that. - (set_boundary): if boundary is NULL, generate a "random" boundary. - - * camel-mime-part-utils.c - (camel_mime_part_construct_content_from_parser): Add a call to - camel_multipart_set_boundary after creating a new multipart. - -2000-05-25 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap/camel-imap-store.c (try_connect): Removed - Exception code - Pop doesn't seem to set exceptions - - * providers/imap/camel-imap-folder.c: Initial code, mostly - just a template for future code - - * providers/imap/imap.[c,h]: Source code from my personal - mailer - for reference only! - -2000-05-25 NotZed <NotZed@HelixCode.com> - - * camel-mime-part-utils.c - (camel_mime_part_construct_content_from_parser): Replace simple - data wrapper here too, oops. - - * Makefile.am (libcamel_la_SOURCES): Removed - camel-simple-data-wrapper again. Less code to maintain == better - code. - - * camel-data-wrapper.c (construct_from_stream): Fixes for bug - where text attachments dont work. Made data-wrapper concrete for - the second time. - -2000-05-23 NotZed <NotZed@HelixCode.com> - - * providers/vee/camel-vee-folder.c (vee_folder_build_folder): - Update the vfolder details for a single folder. - -2000-05-25 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/smtp/camel-smtp-transport.c (_send_to): Took out code - that had been there to reconnect to the server if it was not - already connected - Mailer code was fixed so that this should not - be needed. - - * providers/imap/camel-imap-store.[c,h]: Initial code. - -2000-05-24 Dan Winship <danw@helixcode.com> - - * camel.h: Re-add camel-simple-data-wrapper.h, which was removed - for some reason. - -2000-05-24 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/smtp/camel-smtp-transport.[c,h]: Moved global - variables into struct CamelSmtpTransport to make SMTP - thread-safe - - * providers/imap/camel-imap-*.h: Stolen from Mbox. Rough structure - for Imap. - -2000-05-23 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/imap: Added some initial code to the camel tree - for IMAPv4 - - * providers/imap/.cvsignore: Added to repository - - * providers/smtp/camel-smtp-transport.c: Added debug fprintf's - so that testers can provide more information. Tested with simple - messages and a reply to the hello@helixcode.com default message - but should really be tested more. - (smtp_data): Fixed to use data_wrapper_write_to_stream. - - * camel-mime-filter-smtp.c (filter): Modified to escape all lines - beginning with a '.' and to place a \r before each \n if one did - not previously exist. Removed code to escape "From " as it was - found to not be needed for SMTP. - -2000-05-22 Jeffrey Stedfast <fejj@helixcode.com> - - * providers/smtp/camel-smtp-transport.c (smtp_data): Fixed the - filtered stream. Fixes for stream changes, updated to use - camel-mime-filter-smtp. - - * Makefile.am: Added camel-mime-filter-smtp.c - - * camel-mime-filter-smtp.[c,h]: Added to camel tree - Smtp filter used to change \n into \r\n, escape lone dots, - and escape "From "'s. - -2000-05-19 NotZed <NotZed@HelixCode.com> - - * camel-simple-data-wrapper.c (construct_from_stream): If we - already have been constructed, unref our content. - (write_to_stream): Check we've been constructued, and change for - stream api changes. - - * camel-mime-parser.c: Removed exception stuff. - - * md5-utils.c (md5_get_digest_from_stream): repaired. - - * camel-mime-message.c: Remove exception from write_to_stream, and - fix, and fix formatting. - - * providers/sendmail/camel-sendmail-transport.c (_send_internal): - Fix for stream changes. - - * providers/pop3/camel-pop3-store.c (camel_pop3_command): Fixes - for stream changes. - - * providers/mbox/camel-mbox-folder.c, and elsewhere, fix all - stream api changes. - (mbox_append_message): Use stream_close() now its back. - (mbox_append_message): unref the from filter. - - * camel-stream-mem.c: And here. - - * camel-stream-fs.[ch]: Here too. - - * camel-stream-filter.c: Likewise. This is getting tedious. - - * camel-stream-buffer.c (stream_write): Fix a few little problems. - (stream_close): Reimplement. - (camel_stream_buffer_read_line): Slightly more efficient version, - that also only allocates the right amount of memory for strings. - - * camel-seekable-substream.c: Likewise. - - * camel-seekable-stream.[ch]: Remove exceptions, fix formatting, - changes for stream (re)fixes. set_bounds returns an error. - - * camel-stream.[ch]: Remove exceptions. Make flush and reset return - an error code, repair all the screwed up formatting, and put back - close. - - * camel-mime-part-utils.c - (camel_mime_part_construct_content_from_parser): And here. - - * camel-mime-part.c (camel_mime_part_set_content): And this too. - (write_to_stream): Fixed for stream changes. - - * camel.h: Fixed. - - * providers/vee/camel-vee-folder.c (vee_search_by_expression): - Implement. Performs an intersection of the two searches. - (camel_vee_folder_finalise): Unref search folders. - (vee_append_message): Implement append. - -2000-05-18 Dan Winship <danw@helixcode.com> - - * camel-folder.c: remove message_number_capability and require uid - capatibility. - (camel_folder_list_subfolders, camel_folder_get_uid_list, - camel_folder_get_subfolder_info, camel_folder_get_message_info): - removed - (camel_folder_get_subfolder_names, - camel_folder_free_subfolder_names): new subfolder interfaces. - (camel_folder_get_uids, camel_folder_free_uids): new uid - interfaces - (camel_folder_get_summary, camel_folder_free_summary): new summary - interfaces - - * providers/mbox/camel-mbox-folder.c, - * providers/nntp/camel-nntp-folder.c: - * providers/vee/camel-vee-folder.c: Update for changes - - * providers/pop3/camel-pop3-folder.c: Implement get_uids, update - for other changes. - -2000-05-18 NotZed <NotZed@HelixCode.com> - - * providers/vee/camel-vee-folder.c: Guess! - - * camel-folder-search.c (search_user_flag): Implement user_flag - search term. - - * camel-folder-search.h: Added user_flag search capability - (user-flag "blah") - - * providers/mbox/camel-mbox-folder.c (mbox_init): Set USER flag in - permanent flags for the folder. - -2000-05-17 Dan Winship <danw@helixcode.com> - - * camel-folder.c: Remove unused async open/close and - copy_message_to functions. - Rename functions without initial _. Fix glib preconditions and - gtk-doc comments. - -2000-05-17 Dan Winship <danw@helixcode.com> - - * camel-data-wrapper.c: remove get/set_output_stream operations. - They're redundant with write_to_stream, and CamelMimePart and - CamelMimeMessage only implement the latter, meaning that trying to - get_output_stream on a CamelMimeMessage that was built from pieces - rather than being parsed from a stream doesn't work. Anything that - uses get_output_stream can be rewritten to use write_to_stream, so - we'll standardize on that. - (camel_data_wrapper_new): remove this: CamelDataWrapper is - supposed to be an abstract class. - (write_to_stream): remove default implementation. (Moved to - CamelSimpleDataWrapper) - - * camel-simple-data-wrapper.c: resurrect, although it's not really - the same thing it was before. A simple data wrapper, which is - backed by a CamelStream. - - * camel-mime-part-utils.c - (simple_data_wrapper_construct_from_parser): Use - construct_from_stream rather than set_output_stream. - (camel_mime_part_construct_content_from_parser): Change - camel_data_wrapper_new to camel_simple_data_wrapper_new. - - * camel-mime-part.c (camel_mime_part_set_content): Change - camel_data_wrapper_new to camel_simple_data_wrapper_new. - - -2000-05-17 Darin Adler <darin@eazel.com> - - * camel-folder-summary.c: (message_info_load): - Quick fix to get it to compile. I hope I don't get into trouble. - -2000-05-17 Dan Winship <danw@helixcode.com> - - * camel.h: Don't include the no-longer-distributed - possibly-to-be-removed headers. - - * providers/smtp/camel-smtp-transport.c - (smtp_get_email_addr_from_text): fix an off-by-one error in - address parsing - (smtp_data): use camel_data_wrapper_get_output_stream rather than - data_wrapper->output_stream - -2000-05-17 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-folder.c (message_changed): Snoop - changes to user flags on the message into the summary as well. - - * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_init): - Changed version init to include the parent class version info - (i.e. add it not overwrite it). - - * camel-folder-summary.c (message_info_new): Initialise user_flags - to empty. - (message_info_load): And load user flags. - (message_info_save): And save user flags. - (message_info_free): And free them. - (CAMEL_FOLDER_SUMMARY_VERSION): Bumped file revision. - - * camel-folder-summary.h: Added user-flags to summary. - - * camel-mime-message.c (camel_mime_message_set_user_flag): Dont - use a hashtable for user flags. - (camel_mime_message_get_user_flag): And changed here too. - (camel_flag_get): New interface to get a flag from a flag - list. Flag lists are easier to work with than hash tables, and - save memory too. - (camel_flag_set): And set. - (camel_flag_list_free): And free. - (free_key_only): Discard. - (finalize): Remove the flag list. - -2000-05-17 Jeffrey Stedfast <fejj@stampede.org> - - * providers/smtp/camel-smtp-transport.c: (smtp_helo): Error - checking on gethostbyaddr() eliminating a possible segfault. - -2000-05-16 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-folder.c (mbox_delete_message_by_uid): - Implement. - -2000-05-12 NotZed <NotZed@HelixCode.com> - - * camel-movemail.c (camel_movemail): Open the destination with - O_APPEND, so we dont blow away a partially transferred mbox. - (camel_movemail): Loop if we get errno=INTR, and not fail. - -2000-05-11 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-summary.c (summary_rebuild): Update - the summarised file size, if everything went ok. - (camel_mbox_summary_expunge): Clear header flags after updating. - -2000-05-16 Chris Toshok <toshok@helixcode.com> - - * providers/nntp/camel-nntp-folder.c: - * providers/nntp/camel-nntp-folder.h: - * providers/nntp/camel-nntp-provider.c: - * providers/nntp/camel-nntp-store.c: - * providers/nntp/camel-nntp-utils.c: - * providers/nntp/camel-nntp-utils.h: - get things working with new camel summary stuff. - - * providers/nntp/camel-nntp-summary.c: - * providers/nntp/camel-nntp-summary.h: - removed files since camel-folder-summary does all we need. - -2000-05-15 Jeffrey Stedfast <fejj@stampede.org> - - * providers/smtp/camel-smtp-transport.c: Added some preliminary - AUTH support. - -2000-05-15 Dan Winship <danw@helixcode.com> - - * camel-folder.h: Remove camel_folder_get_summary, which no longer - exists. - -2000-05-11 Dan Winship <danw@helixcode.com> - - * Makefile.am: remove some cruft that we're not currently using. - - * camel-stream-mem.c (camel_stream_mem_new_with_buffer): Change - to match prototype (size_t vs unsigned int) so it works on 64-bit - machines. Noted by msw. - -2000-05-11 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-folder.c (message_changed): Indicate - the summary changed also. - -2000-05-11 Jeffrey Stedfast <fejj@stampede.org> - - * providers/smtp/camel-smtp-transport.c: (smtp_helo): - Updated to more closely comply with RFC 821 standards - -2000-05-11 NotZed <NotZed@HelixCode.com> - - * camel-mime-part.c (write_to_stream): Unref the filter after - adding it to the filtering stream. - - * providers/mbox/camel-mbox-summary.c - (camel_mbox_summary_finalise): Free the folder path. - (camel_mbox_summary_update): Also save summary when done. - (camel_mbox_summary_expunge): Unindex items when deleting them. - (camel_mbox_summary_expunge): Save the index as well as the - summary. - - * camel-folder-summary.c (camel_folder_summary_finalise): Free the - summary path. - (camel_folder_summary_touch): New function, indicate the summary - info changed. - (camel_folder_summary_remove): Dirty here. - - * camel-internet-address.c (internet_decode): Free multiple entry - addresses properly. - - * camel-mime-utils.c (header_decode_mailbox): Plugged another - memleak, free text after converting it. - (header_decode_addrspec): More leaks plugged. - - * camel-mime-message.c (finalize): Free message_uid. - (finalize): Free the recipients hashtable. - -2000-05-11 <notzed@helixcode.com> - - * camel-folder-summary.c (camel_folder_summary_finalise): Free - summary items and charset filters. - -2000-05-10 <notzed@helixcode.com> - - * camel-folder-summary.c (camel_folder_summary_finalise): Don't - free stuff in p, after we've free'd p. - - * providers/mbox/camel-mbox-folder.c (mbox_append_message): Unref - the stream we created for appending. - -2000-05-10 Jeffrey Stedfast <fejj@stampede.org> - - * providers/smtp/camel-smtp-transport.c: (camel_smtp_transport_class_init): - Added initialization for service_class - -2000-05-10 Dan Winship <danw@helixcode.com> - - * camel-multipart.c (write_to_stream): fix a stupid typo. Thank - you, C. - - * camel-mime-part.c (write_to_stream): don't ref the stream before - wrapper a filter around it, since nothing will ever unref it. - -2000-05-10 Christopher James Lahey <clahey@helixcode.com> - - * Makefile.am: Added camel-types.h, camel-folder-pt-proxy.h, and - camel-thread-proxy.h. - -2000-05-09 Dan Winship <danw@helixcode.com> - - * providers/sendmail/camel-sendmail-transport.c (_send_internal): - Bleah. Can't fsync a pipe. As a quick kludge, just don't - stream_flush it. The right fix will require bringing back - stream_close though. - -2000-05-09 Jeffrey Stedfast <fejj@stampede.org> - * camel-internet-address.[c,h]: Undid my changes (moved - struct _address back into came-internet-address.c) - * providers/smtp/camel-smtp-transport.c: (_send): changed - from using it's own address manipulation (using struct _address) - to using camel_internet_address_get(). Also some format changes - to keep consistant with the rest of Camel - -2000-05-09 Jeffrey Stedfast <fejj@stampede.org> - - * camel-internet-address.[c,h]: Moved struct _address from - camel-internet-address.c to camel-internet-address.h - (hopefully this doesn't break anything...) - * providers/smtp/camel-smtp-transport.c: (_send): now - populates the recipient list with To, Cc, and Bcc addresses. - Should now be able to use this module. - -2000-05-09 Dan Winship <danw@helixcode.com> - - * providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid): - one more refcounting fix I missed before. - -2000-05-08 Jeffrey Stedfast <fejj@stampede.org> - - * providers/smtp/camel-smtp-transport.c: no longer frees memory it - shouldn't, updated to reflect camel-stream changes involving - CamelException (perhaps it should use a different CamelException - variable than is passed to the camel smtp module?) - -2000-05-08 Dan Winship <danw@helixcode.com> - - * camel-stream.c (camel_stream_read, camel_stream_write, - camel_stream_flush, camel_stream_reset, camel_stream_printf, - camel_stream_write_to_stream): Use CamelException to signal - failure. - (camel_stream_write_strings): Remove. camel_stream_printf is more - useful in most of the places that used this. - (camel_stream_write_string): Change from macro to function to - prevent problems with double-evaluation. - - * camel-seekable-stream.c (camel_seekable_stream_seek, - camel_seekable_stream_set_bounds): Use CamelException. - (reset): Update. - - * camel-seekable-substream.c, camel-stream-buffer.c, - camel-stream-filter.c, camel-stream-fs.c, camel-stream-mem.c: - Update. - - * camel-stream-fs.c: Remove the virtual init functions and move - the code into the creator functions. Add CamelExceptions to - creation functions that could fail. - - * camel-data-wrapper.c (camel_data_wrapper_write_to_stream): Use - CamelException. - * camel-mime-message.c, camel-mime-part.c, camel-multipart.c - (write_to_stream): Update. - - * camel-mime-parser.c: add an exception to the mime parser private - data and pass that to stream functions as needed. - - * gmime-content-field.c, md5-utils.c: Update (badly) for stream - changes. - - * camel-exception.h (camel_exception_is_set): convenience macro. - - * providers/Makefile.am: disable SMTP for now - - * providers/mbox/camel-mbox-folder.c (mbox_append_message): Pass - CamelException to the functions that now need it. Check the - exception after calling camel_stream_flush, and fail if it fails. - (mbox_get_message_by_uid): More updates. - - * providers/pop/camel-pop3-folder.c, - providers/pop/camel-pop3-store.c, - providers/sendmail/camel-sendmail/transport.c: Update. - - -2000-05-08 NotZed <NotZed@HelixCode.com> - - * camel-mime-message.c (process_header): Format From and Reply-To - to at least a decoded string. Should probably store them as an - camelinternetaddress. - - * Merged NEW_SUMMARY branch back to trunk, and resolved conflicts. - - * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_update): - Return status. - (camel_mbox_summary_expunge): Force an update of the summary - before we do anything. - (camel_mbox_summary_expunge): Build new xev line in xevnew, and - free that, and consify xev. - (camel_mbox_summary_load): If we are rebuilding from scratch, make - sure we clear the summary content. - - * camel-stream-filter.c (do_close): We NEED a stream close. - -2000-05-07 Dan Winship <danw@helixcode.com> - - Make camel not leak like a sieve. - - * camel-object.c: New subclass of GtkObject which is now the base - of the Camel object hierarchy. Currently the only difference - between CamelObject and GtkObject is that CamelObjects don't start - out floating. - - * *.h: Move a bunch of typedefs to camel-types.h. Standardize on - using <camel/foo.h> in header files rather than <foo.h>, "foo.h", - or "camel/foo.h". Remove some unneeded includes. - - * camel-address.c, camel-data-wrapper.c, camel-folder-search.c, - camel-folder-summary.c, camel-folder.c, camel-mime-filter.c, - camel-mime-parser.c, camel-service.c, camel-session.c, - camel-stream.c: These are now subclasses of CamelObject. - - * camel-data-wrapper.c (set_output_stream): - * camel-medium.c (set_content_object): - * camel-seekable-substream.c - (init_with_seekable_stream_and_bounds): - * providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid): - remove gtk_object_sink calls. - - * camel-stream-buffer.c (init_vbuf): - * camel-stream-filter.c (camel_stream_filter_new_with_stream): - ref the original stream. - - * camel-folder-summary.c (camel_folder_summary_finalise): unref - the filters when finalizing. - - * camel-mime-part-utils.c - (simple_data_wrapper_construct_from_parser, - camel_mime_part_construct_content_from_parser): - * camel-mime-part.c (camel_mime_part_set_content): Unref objects - that are created only to be handed off to other objects. If - they're going to be needed later, they will have been additionally - ref'ed by the object that needs them. - - * providers/pop3/camel-pop3-folder.c (get_message_by_number): - unref the message stream after creating the data from it. - - * camel-stream.c, camel-stream-buffer.c, camel-stream-filter.c, - camel-stream-fs.c, camel-stream-mem.c: Remove camel_stream_close, - since its semantics are dubious (what happens when you close a - stream other people still have references on?). - - * providers/nntp/camel-nntp-store.c: - * providers/smtp/camel-smtp-transport.c: - * providers/pop3/camel-pop3-store.c: - replace camel_stream_close calls with gtk_object_unref. - - * providers/mbox/camel-mbox-folder.c: - * providers/nntp/camel-nntp-folder.c: - * providers/sendmail/camel-sendmail-transport.c: - replace camel_stream_close with camel_stream_flush + - gtk_object_unref - -2000-05-06 Dan Winship <danw@helixcode.com> - - * providers/pop3/camel-pop3-store.c (query_auth_types): A machine - which serves neither POP nor KPOP is not a POP server. - - * providers/smtp/camel-smtp-provider.c: Note in the description - that this provider is not yet tested. - -2000-05-08 <notzed@helixcode.com> - - * camel-mime-part.c (write_to_stream): Free the filter stream when - done. - - * camel-mime-parser.c (folder_seek): Make sure we add the \n - terminal when we seek as well (frob!). - - * camel-mime-utils.c (header_decode_addrspec): Plug minor memleak. - - * camel-mime-part.c (finalize): Free header tables once finished. - - * camel-folder-summary.c (camel_folder_summary_remove): Dont try - to access info after its free'd. - -2000-05-07 NotZed <NotZed@HelixCode.com> - - * camel-mime-part.c (write_to_stream): Apply encoding to content - part, when writing to a stream *sigh*. - - * camel-stream-filter.c (do_write): implement write for the - filtering stream. Writes shouldn't be mixed with reads. - (do_flush): Implemented flush. Again write/flush shouldn't be - mixed with reads. Only flushes if the last op was write. - (do_close): Force flush on close. - - * camel-mime-filter.c (filter_run): Oops, make sure we include the - backlen in the total length before passing onto the filter. - - * camel-mime-filter-from.c: New filter, munges 'From ' lines into - '>From ', for mbox. - - * camel-mime-parser.c (camel_mime_parser_header_remove): New - function to remove the parser's raw header, rather than - manipulating the header directly (wich doesn't work with - mempools). - - * camel-mime-utils.c (header_address_list_clear): Fixed some - broken(tm) logic, which would leak entries on multivalued lists. - - * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_load): - Use ibex_save() to save the ibex. Makes a big difference to - startup times for very large mailboxes. - (camel_mbox_summary_expunge): Dum de dum, reimplemented. Designed - to be much more robust, and to stop immediately if anything awry - happens. - (copy_block): Utility function to copy n bytes from one fd to - another. - (header_write): Utility function to write out raw headers to an - fd. - (camel_mbox_summary_update): Incremental summary updater. - - * providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid): - Dont unref the stream, because of the broken(tm) ref model of gtk - widget that for some odd reason is being perpetuated in camel. - (mbox_expunge): Reenable expunge again. - (mbox_append_message): Removed the optimised mbox append. If its - an issue, it can go back later. Cleaned up a lot, checks error - returns, and automagically translates 'From ' into '>From' as - necessary. - -2000-05-07 <notzed@helixcode.com> - - * camel-mime-filter.c (filter_run): Oops, forgot to add the - backlen to the pre-buffer (*poof*). - -2000-05-07 NotZed <NotZed@HelixCode.com> - - * camel-mime-message.c (construct_from_parser): Allow - HSCAN_FROM_END to terminate the processing of a message. - - * camel-folder-summary.c (perform_content_info_load): Ick, dont - try and append a node onto its own list. - (camel_folder_summary_clear): Actually clear the indexes after - we've removed the messages. - (camel_folder_summary_clear): Set dirty if it changes. - (camel_folder_summary_load): Clear dirty. - (camel_folder_summary_save): Only save if dirty. - - * providers/mbox/camel-mbox-summary.c (summary_header_load): Oops, - remember to call that parent class first ... - (summary_header_save): Here too. - (camel_mbox_summary_load): Do more checking to verify the index - contents as well as teh summary contents, against the mbox - contents. - (camel_mbox_summary_load): Removed some fo that checking, it needs - more code to work reliably. - -2000-05-07 <notzed@helixcode.com> - - * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_load): - Set the size and mtime of the mbox we indexed once done. - - * camel-folder-summary.c (camel_folder_summary_set_index): Dont - write the index if it changes - let the claler fix it (uh, kind of - impacts performance). - (camel_folder_summary_load): close in. - - * camel-folder-summary.c (summary_format_string): Check header - exists before trying to strip its leading spaces. - -2000-05-06 NotZed <NotZed@HelixCode.com> - - * camel-folder.h: Removed summary info from here, and include - camel-folder-summary.h as well. - - * camel-mime-parser.c (camel_mime_parser_step): Allow it to accept - a NULL databuffer. - - * providers/mbox/camel-mbox-summary.c: Totally new file, now - subclasses camel-folder-summary. - - * camel-folder-summary.c (message_info_load): Load the uid as a - string. - (message_info_save): And save too. - (camel_folder_summary_clear): New function, clears the contents of - the summary. - - * providers/mbox/camel-mbox-folder.c: Fixes for summary changes. - (mbox_get_message_by_uid): Completely redone. Now cross-checks - the summary information to make sure we get a real message. - (mbox_append_message): Disabled the copy version of append for - now. - (mbox_expunge): Temporarily disabled the expunge function, until - it is put back in camel-mbox-summary.c - -2000-05-05 NotZed <NotZed@HelixCode.com> - - * camel-folder-summary.c: And same here ... - (camel_folder_summary_encode_fixed_int32): Ugh, fwrite doesn't - return -1 on error .. - (camel_folder_summary_decode_fixed_int32): Neither deos fread. - (camel_folder_summary_encode_token): Fix here too. - (summary_build_content_info): Use start-headers to get the pos of - the message, not parser_tell(), which might not be what we - expected because of parser_unstep(). - (camel_folder_summary_encode_token): Use bserch() to tokenise the - values, rather than a linear search. - - * camel-mime-utils.c: Defined out some memory profiling stuff I - left there by mistake. - (header_decode_mailbox): Dont try to append the word part of a - local address if we ran out of words. - - * camel-mime-parser.c (folder_scan_content): Apply the fix from - the header scanner to here too. - (folder_scan_header): Only check for end of header if we have - space for it (didn't end the read with a newline) - (folder_scan_header): inptr is the only real thing we need - registerised for performance. Try to help the compiler be smart - about it .. - (folder_scan_header): Simplified the save header case a tad. - - Commented out some memory profiling stuff. - -2000-05-05 <notzed@helixcode.com> - - * camel-mime-utils.c (header_decode_mailbox): Plug a memory leak. - (header_decode_text): Fixed memory leaks with g_string_append(). - (header_encode_string): And here too, and a few other places. The - glib api is so awful ... - (header_content_type_decode): More memory leaks. - -2000-05-05 <notzed@helixcode.com> - - * camel-mime-parser.c (folder_scan_init_with_fd): Make sure we - init the end of buffer sentinal! - (folder_scan_init_with_stream): And here too ... - -2000-05-04 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-folder.c (summary_get_message_info): - Maxcount is minimum of the max and the requested count, not the - maximum :) - - * camel-mime-parser.c (folder_scan_content): Properly set midline, - so we dont falsely catch offset boundary markers (i.e. From inside - content). - (folder_read): Set a sentinal on the end of the read data (\n) so - we dont have to check the buffer boundary in the inner loop. - (mempool_*): New experimental memory management routines, speed - up simple structure parsing by about 25% ... not compiled in by - default. Something similar may be needed for camel-mime-utils to - address performance issues with g_malloc and friends. - - * camel-mime-utils.c: Added a macro w(x) used to wrap all warnings - about mime/rfc violations, so they can be turned off. - - * camel-folder-summary.c (summary_build_content_info): Step after - the end of a message ... - Turn into a stand-alone program for testing and profiling. - -2000-05-04 Dan Winship <danw@helixcode.com> - - * providers/pop3/camel-pop3-store.c (pop3_connect): Don't fall - back to plaintext passwords if APOP fails, since it should also - fail. - -2000-05-04 Dan Winship <danw@helixcode.com> - - * camel-session.c (camel_session_list_providers): New function to - replace camel_provider_scan. Returns a list of either (a) all - currently-loaded providers, or (b) all available providers. - - * camel-url.[ch]: Add an "empty" flag to CamelURL (indicating that - it contains only a protocol). - - * camel-service.c (camel_service_query_auth_types): Make this take - a CamelException (since it may have to try to connect to the - server, and it might not able to.) - - * providers/pop3/camel-pop3-store.c: add KPOP (Kerberized POP) - support. This is mostly so I have two kinds of authmech to play - with instead of just one. (But it does actually work.) - - * providers/smtp/camel-smtp-transport.c (query_auth_types): update - for prototype change, but disable the functionality, since it - doesn't really support any auth types yet. - (camel_smtp_transport_get_type): add an object init function to - set the service url_flags. - -2000-05-04 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-summary.c: Yes, and anotherone. - - * camel-mime-utils.c: And another one. - - * camel-mime-part.c: And another one. - - * camel-mime-part-utils.c: And another one. - - * camel-folder-search.c: And another one. - - * camel-mime-parser.c: Reverted a change wihtout a ChangeLog entry. - -2000-05-04 NotZed <NotZed@HelixCode.com> - - * camel-folder-summary.[hc]: Yes, CamelFolderSummary is back ... - ... re-usable class to summarise and index any stream or message - and to manage/load/save the created summaries. - - * camel-folder.c: Include string.h to kill a warning. - -2000-05-03 Jason Leach <leach@wam.umd.edu> - - * Makefile.am (INCLUDES): add $(UNICODE_CFLAGS) to the INCLUDES, - people who installed libunicde in non-standard include paths need - this. - -2000-05-03 NotZed <NotZed@HelixCode.com> - - * camel-folder.h: Added pos/bodypos/endpos to the basic message - content info object. Size to be removed? Moved the - messageconentinfo and messageinfo back to camel-folder-summary.h. - - * camel-mime-filter-index.c (camel_mime_filter_index_set_ibex): - New function to (re)set the index to use on a filter. - - * camel-mime-parser.c (camel_mime_parser_scan_from): Whole bunch - of inline docs. - (camel_mime_parser_drop_step): New function to drop a state from - the parser. Needs more testing. - - * camel-mime-utils.c (rfc2047_decode_word): If the iconv handle is - -1, then dont try and convert (crashes unicode_iconv?). - (rfc2047_decode_word): Use alloca for variables instead of - g_malloc - by the rfc they should always be short. - (rfc2047_decode_word): If we can't do the charset conversion, undo - the quoted-printable/base64 at least? Should probably convert - unknown characters to the utf-8 unknown character. - -2000-05-02 Larry Ewing <lewing@helixcode.com> - - * camel-mime-utils.c (header_decode_date): fix typo when - dereferencing saveoffset. - -2000-05-02 NotZed <NotZed@HelixCode.com> - - * camel-folder-search.c: Added some header doco. - - * camel.h: REmove gmime-utils.h from here. - - * providers/mbox/camel-mbox-search.[ch]: Removed. Functionally - redundant. - - * providers/mbox/camel-mbox-folder.c (mbox_search_by_expression): - Use the new CamelFolderSearch class to do the actual searching, - just setup the search here. - - * camel-folder-search.[ch]: A helper class that providers may - subclass to provide their own search functionality, or they can - simply use as is, it supports body searches if an ibex is - supplied, and header searches if a summary is supplied. - -2000-05-02 Matt Loper <matt@helixcode.com> - - * Makefile.am: set G_LOG_DOMAIN. - * providers/MH/Makefile.am: same. - * providers/maildir/Makefile.am: same. - * providers/mbox/Makefile.am: same. - * providers/nntp/Makefile.am: same. - * providers/pop3/Makefile.am: same. - * providers/sendmail/Makefile.am: same. - * providers/smtp/Makefile.am: same. - -2000-05-02 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-search.c - (camel_mbox_folder_search_by_expression): Dont store/remove - current search from the search list. - - * providers/mbox/camel-mbox-folder.h: Removed searches list, - searches are all sync now. - - * gmime-utils.[ch]: What the hell, remove it. This will break the - nntp provider. The mime parser can be used instead though. - Removed from all code including it (but none were using it). - - * gmime-utils.c (_store_header_pair_from_string): Removed bizarre - string_dichotomy version of this. This code is somewhat redundant - now, and is headed for death anyway. - - * gstring-util.c (g_string_dichotomy): Same with this one. - (g_string_clone): Removed a memory leak, g_string_new() allocates - its own memory. - (g_string_append_g_string): Allow to append an empty gstring onto - another gstring, dont abort()! - - * string-utils.c (string_dichotomy): Removed this incredibly weird - function. - - * camel-folder.c (_create): Replaced the rather obtuse use of - "string_dichotomy" function with a simple strrchr(). Still not - sure it'll work. - - * camel-folder-summary.c: cvs removed a long-removed file. - - * camel-mime-parser.c (folder_scan_header): Fix the previous - overflow problem properly (can happen in 2 places). - (header_append): A new macro to include the code changed above, so - it only appears in one place. - (folder_scan_step): Change the content type to text/plain if the - multipart is broken. Doesn't actually change the header though. - (header_append): Also move the header-start tracking stuff here. - Could be a static function to save code. - -2000-05-02 <notzed@helixcode.com> - - * camel-mime-part-utils.c - (simple_data_wrapper_construct_from_parser): Dont use autofill on - these fucking long function anmes!!!!!! - -2000-05-02 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-summary.c - (camel_mbox_summary_expunge): Fix the offset for the summary when - an item is expunged to take account of the From line. - -2000-05-01 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-folder.h (CamelMboxFolder): Removed - search_id. - - * providers/mbox/camel-mbox-search.c - (camel_mbox_folder_search_cancel): Remove.d - (camel_mbox_folder_search_complete): Removed. - (camel_mbox_folder_search_by_expression): Changed back to sync - api. - (struct _searchcontext): Removed cancelled flag. - (find_context): Removed. - (func_header_contains): Debug out some search stuff. - - * providers/mbox/camel-mbox-search.h - (camel_mbox_folder_search_by_expression): Moved back to sync api. - - * providers/mbox/camel-mbox-summary.c - (camel_mbox_summary_set_flags_by_uid): New function to update the - flags in the summary. - (camel_mbox_summary_expunge): Expunge messages from a folder. - (offset_content): Re-align offsets of summary when messages - added/removed to an existing summary. - (camel_mbox_summary_remove_uid): Remove a message summary entry by - uid. - (index_folder): Restore flags from X-Evolution header, if they are set. - (index_folder): Make sure we index using a decimal uid, since - thats what everything else indexes off (oops). - Upped SUMMARY_VERSION as a result. - (camel_mbox_summary_expunge): Oops, my wrong, use the string uid - to unindex on. - - * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): - Connect to the message_changed signal. - (_init): Set permanent flags to something reasonable. No user - flags yet ... - (message_changed): If the flags of the message change, update the - flags in the summary. - (mbox_expunge): Implement the expunge. - (camel_mbox_folder_class_init): Renamed all leading _'s to mbox_'s - (mbox_expunge): Emit a folder_changed signal on expunge (uh, even - if it didn't ...) - - * camel-folder.c (_finalize): Uh, dont free permanent_flags - anymore (this wouldn't failed anyway, it was a GList !!!) - (camel_folder_search_complete): Removed. - (camel_folder_search_cancel): Removed. - (camel_folder_expunge): Changed to only allow expunge on an open - folder. It doesn't make sense for mbox, otherwise (?) - (camel_folder_class_init): Added a folder_changed signal. - - * camel-folder.h (struct _CamelFolder): Change permanent_flags to - a bitfield. - (list_permanent_flags): Renamed to get_permanent_flags, and - returns a bitfield. - (camel_folder_expunge): Changed expunge to a void type. The - messages would no longer be useful after they have been removed - ... - (CamelFolderClass): New function summary_get_by_uid() to get a single - summary. - (*search*): Moved back to synchronous search api ... *sigh* - - * camel-folder.h: Removed CamelSearchFunc. - - * camel-mime-message.c (set_flag): Removed. - (camel_mime_message_set_flag): Removed. - (get_flag): Removed. - (camel_mime_message_get_flag): Removed. - (add_flag_to_list): Removed. - (get_flag_list): Removed. - (camel_mime_message_get_flag_list): Removed. - (camel_mime_message_get_flags): New interface to get system flags. - (camel_mime_message_set_flags): " to set ". - (camel_mime_message_get_user_flag): To get a user flag. - (camel_mime_message_set_user_flag): To set a user flag. - (finalize): Hmm, the old one free'd the key and data, not good - when the data is a boolean ... - -2000-04-30 Dan Winship <danw@helixcode.com> - - * camel-provider.h: Tweak the definition of CamelProvider. Among - other things, a provider may now be both a store and a transport. - - * camel-provider.c: Remove a lot of code we had no intention of - using. This now only contains two functions: camel_provider_init - to read the installed .urls files, and camel_provider_load to - load and register a new provider. - - * camel-session.c: Remove more unused code and simplify some of - the remaining code. The list of available provider modules is now - stored in the session, and it handles calling camel_provider_load - to load them as needed. Provider registration is now done by - calling back from the module init routine, which allows a single - module to register providers for multiple URL types. - - * providers/*: Update provider structures and init routines for - the new stuff. Add a .urls file to each provider specifying what - urls it handles, and install that with the library. - - * providers/nntp/camel-nntp-provider.c: Add hints towards - supporting both news: and nntp: URLs, and using nntp as both a - store and a transport. - -2000-04-29 Dan Winship <danw@helixcode.com> - - * camel-internet-address.c (camel_internet_address_get): const - poison - - * camel-mime-part-utils.c - (simple_data_wrapper_construct_from_parser): - camel_mime_parser_tell() returns an offset from where it started - parsing, not necessarily from the start of data. Since we're - parsing a bounded seekable_stream, we need to add the stream's - starting bound to camel_mime_parser_tell's return value to - create the substream in the right place. - - * camel-seekable-substream.c - (camel_seekable_substream_new_with_seekable_stream_and_bounds): - say CAMEL_STREAM_UNBOUND rather than -1 in doc. - - * camel-seekable-stream.c (camel_seekable_stream_seek): Add more - info to docs. - -2000-04-28 Dan Winship <danw@helixcode.com> - - * camel-mime-parser.c (folder_scan_header): fix a bug that would - cause corruption with very long headers. - -2000-04-27 Ettore Perazzoli <ettore@helixcode.com> - - * providers/pop3/Makefile.am (INCLUDES): Add `-I$(srcdir)/../../..' - to pick the Camel includes. - * providers/sendmail/Makefile.am (INCLUDES): Likewise. - - * camel.h: Don't #include <camel/data-wrapper-repository.h> anymore. - -2000-04-27 NotZed <NotZed@HelixCode.com> - - * camel-mime-utils.c (check_header): Dont try and check a NULL - header. - - * camel-recipient.[ch]: Dead. Its not pining. - - * camel-mime-message.h: Dont include recipients.h anymore. - - * camel-mime-message.c (camel_mime_message_add_recipient): Accept - name/address separately, and store in an CamelInternetAddress. - (add_recipient): Removed. - (remove_recipient): Removed. - (remove_recipient_address): Renamed from remove_receipient, works - via address. - (camel_mime_message_remove_recipient_name): New function to remove - by name. - (get_recipients): Removed. - (camel_mime_message_get_recipients): Return a camel-internet-address. - (write_to_stream): No longer write receipients directly. - (write_recipients_to_stream): Removed. - (write_one_recipient_to_stream): Removed. - (camel_mime_message_init): Setup recipients hashtable, rather than - usign the recipients stuff. - (set_recipient_list_from_string): Killed, a violent and lengthy - death. - (process_header): Simplified recipient handling code a lot. - (received_date_str, sent_date_str, reply_to_str, subject_str, - from_str): Removed some oddly-defined global statics. - (camel_mime_message_class_init): Dont initialise above variables - anymore. - (init_header_name_table): Removed, use a table to init this, and - do it in class init (2 lines of code ...). - - * camel-news-address.c: Class to represent news addresses - - currently empty, and not built. - - * camel-internet-address.h: Class to represent internet (email) - addresses. - - * camel-address.h: Abstract class to represent (lists of) - addresses. - -2000-04-27 Dan Winship <danw@helixcode.com> - - * camel-mime-part.c (write_to_stream): Revert previous change. I - was confused. - - * camel-url.[ch] (camel_url_encode, camel_url_decode): expose - these routines. - -2000-04-26 Dan Winship <danw@helixcode.com> - - * camel-mime-part.c (write_to_stream): Only write a newline - between the headers and the content object if the content object - is not a CamelMedium. (If the content is a medium, it may have its - own headers, which then need to go before the blank line.) - - * camel-mime-body-part.[ch]: Remove. We weren't using the fields - that made this different from camel-mime-part, so it basically - just forced us to do lots of gratuitous typecasting. - - * camel-multipart.[ch]: Use CamelMimePart. Remove the multipart - parent stuff, since we weren't using that either. - - * etc: update for CamelMimeBodyPart -> CamelMimePart - -2000-04-26 Dan Winship <danw@helixcode.com> - - * camel-medium.c (set_content_object): sink the content object - after referencing it. - - * camel-mime-part.c: fix various little things in the handling - of CamelMedium methods. Change camel_mime_part_set_text to the - more generic camel_mime_part_set_content. - - * camel.h: sync to current reality - - * camel-folder-utils.[ch]: removed - - * camel-mime-utils.c (header_format_date): fix format specifier - for time zone. Fix typo in month names array. - -2000-04-26 NotZed <NotZed@HelixCode.com> - - * camel-seekable-substream.c (stream_seek): Changed to have - absolute seek semantics, not relative to the bounds. - - * camel-seekable-stream.c (reset): When we reset, seek to the - start of the bound, if there is one. - (stream_tell): Make tell virtual. - - * camel-stream-filter.c (do_available): Removed. - - * camel-stream-buffer.c: Remove leading _'s from static functions. - (stream_read): Renamed from read(). Fancy that conflicting! (my - boo!) Others too. - - * providers/pop3/camel-pop3-folder.c (get_message_by_number): - Changed to stream_mem interface. - - * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Fixed - for streamfs interface changes, and implement a failure case. - (_append_message): Changed for fs stream interface change. - - * camel-multipart.c (print_part): Iterate rahter than callback. I - hate glists's interface (hence, move this to write_to_stream). - (write_to_stream): Return an error (yuck, this is a royal PITA to - do with the stream write interface). - - * camel-mime-message.c: Removed leading _ from static names. - - * camel-mime-part.h: construct_from_parser() now returns an error - code. - - * camel-mime-part-utils.c - (camel_mime_part_construct_content_from_parser): Changed to use a - camel-data-wrapper instead of a camel-simple-data-wrapper (no - change needed elsewhere?). - (simple_data_wrapper_construct_from_parser): Fixes for stream-mem - interface changes. - - * camel-simple-data-wrapper.[ch], - camel-simple-data-wrapper-stream.[ch], - camel-stream-data-wrapper.[ch], removed. Fixed including of these - files. - - * camel-mime-part.c (camel_mime_part_set_text): Remove the use of - the camel-simple-data-wrapper-stream, just use a mem stream. - (write_to_stream): Renamed from my_* - (construct_from_stream): Return an error on error. - - * camel-stream-mem.c (camel_stream_mem_new*): Remove mode - parameter. - - * camel-stream-mem.h (enum CamelStreamMemMode): Removed. It - wasn't used at all. - - * camel-data-wrapper.h: Add camel_data_wrapper_new() to create - these. - (write_to_stream, construct_from_stream): Return an error - indicator for success. Fixed all methods to match (ICK). - - * Makefile.am (libcamel_la_SOURCES): Remove - camel-simple-data-wrapper.c, camel-simple-data-wrapper-stream.c, - camel-stream-data-wrapper.c. Obsoleted by code re-use! - - * camel-data-wrapper.c (construct_from_stream): Change the default - implementation to just set the output stream == construction - stream. Well, this lets me get rid of both simple-data-wrapper - and stream-data-wrapper (unused anyway), and - simple-data-wrapper-stream in one hit. CamelDataWrapper is now - also a concrete class. - (write_to_stream): Use camel_stream_write_to_stream() to - calculate/return values (and save code). - Include <errno.h> for obvious reasons. - - * camel-stream.c (eos): Provide a default implementation of .eos(). - (camel_stream_write_to_stream): Make it return an error code on - error. - (camel_stream_printf): Changed to return the number of bytes - written/error. - (camel_stream_available): Removed. - - * camel-stream-fs.h (enum CamelStreamFsMode): Removed. Changed to - use unix modes and so forth (wasn't used for anything but new file - creation and didn't work well either). - - * camel-stream-fs.c: Removed leading _'s for names. And removed - some virtual method 'documentation'. - (destroy): Dont try and close a closed/error fd. Only report - error if close returns -1. Moved all the code to finalise(), and - killed this function. - (init_with_fd): Properly setup the seek offset, if it is a - valid and seekable file descriptor. - (init_with_fd_and_bounds): Use off_t for bounds, set bounds on the - seekable stream. - (init_with_name): Return error codes. - (init_with_name_and_bounds): Ditto. - (camel_stream_fs_new_with_name): REturn NULL object if it failed. - (camel_stream_fs_new_with_name_and_bounds): Return NULL object on - failure. Changed with_name* api's to take unix open style args - and flags. - (read): The bounded stream bounds checking seemed off, simplified - code a bit. - (write): Implement bounds checking for writing, the comment was - wrong, it could make sense to bound writing. Cleaned up a little. - (available): Gone. - (eos): Removed. Use CamelStream's implementation now. - (close): Reset the fd to -1, provide a warning for bad usage. - (seek): Cleaned up. Changed the behaviour a little, the returned - offset is the absolute position in the file, even in bounded - streams. - (seek): Seek from end mirrors lseek() behaviour (reverse seeking). - -2000-04-25 NotZed <NotZed@HelixCode.com> - - * camel-stream-fs.h (struct _CamelStreamFs): Moved bounds and eof - indicator to other parent classes. - - * camel-stream.c (camel_stream_printf): New utility - function. Obvious use. - - * camel-stream-mem.c: Removed leading _'s from static func's. - (camel_stream_mem_new_with_byte_array): Fixed for api changes, set - the owner for the byte array to us. - : Removed A bunch of gtk doc stuff for static (implementation) functions. - (available): Removed. - (write): Fixed the write implementation so that seek() works on a - seekable memory stream, as expected. Seeking past the end of the - buffer has unix semantics (filling with 0). - (available): Removed. - (write): Implement seekable stream bounded stream. - (read): Implement seekable stream bounded stream. - (close): Dont free the stream_mem if we're not the owner. - (seek): Allow to seek beyond the end of memory area, - implement bounds checking. - (seek): Set errno on bad policy. - - * camel-stream-mem.h (struct _CamelStreamMem): Changed position to off_t. - (new_with_buffer): Changed len to be a size_t. - (set_buffer, set_byte_array): New interface functions. - (struct _CamelStreamMem): Removed position, it is stored in the - superclass. - - * camel-stream.h: Removed some of the seemingly random - whitespace. Removed the available method (its not - impelemented/useful enough). - - * camel-seekable-substream.c - (init_with_seekable_stream_and_bounds): Remove the data_available - stuff, it hasn't been properly implemented/finished, and may never - work (unfortunately *sigh). - (reemit_parent_signal): Removed part of the above change. - (set_bounds): Removed (moved to seekable-stream). - : Fixed up some of the generally unreadable indenting (sorry, - wrapping at 80 characters with - camels_really_long_function_names() - just_doesnt_work_very_well_does_it(). - (available): Removed. - (stream_seek): Fixup for object changes. Make sure we return -1 - if the parent stream can't seek. - - * camel-seekable-stream.c (ccamel_seekable_stream_set_bounds): New - function to bound any seekable stream. - : Removed _'s. - (camel_seekable_stream_class_init): Implement an init function, to - setup the stream bounds to unbound. - - * camel-seekable-stream.h (CamelSeekableStreamClass): New virtual - method set_bounds for seekable streams. - (CAMEL_STREAM_UNBOUND): New define for no bound. - - * camel-seekable-substream.h (struct _CamelSeekableSubstream): - Removed sup_bound and inf_bound, moved to CamelSeekableStream (and - renamed, and changed to off_t's). - (new_with_seekable_stream_and_bounds): Use off_t as the bounds. - (CamelSeekableSubstreamClass): Uh, why was the intialiser virtual? - Removed. - - * camel-seekable-stream.[ch] (CamelSeekableStreamClass): Changed seek - to accept an off_t as the offset. - (struct _CamelSeekableStream): Renamed cur_pos to position and - changed it to an off_t type. - (enum CamelStreamSeekPolicy): Set to match the SEEK_* constants - from lseek(). - (get_current_position): Renamed to tell(). - - * camel-stream-buffer.h: Commented out set_vbuf - never implemented. - -2000-04-25 Dan Winship <danw@helixcode.com> - - * camel-stream-buffer.c (_eos): only return TRUE if the parent is - at eos AND the buffer has been exhausted - - * camel-mime-message.c: fix some incorrect macro usage that - resulted in bogus casts - -2000-04-24 Dan Winship <danw@helixcode.com> - - * camel-mime-part-utils.c - (simple_data_wrapper_construct_from_parser): fix a cut-and-pasto. - - * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): ref - (and sink) the message stream if we're going to unref it later. - Otherwise it could get destroyed while there are still substreams - attached to it. This needs a cleaner solution. - - * camel.h: remove data-wrapper-repository.h include(s) - -2000-04-24 NotZed <NotZed@HelixCode.com> - - * camel-mime-message.c (construct_from_parser): Allow MESSAGE_END - _or_ EOF as valid termination conditions. - - * providers/mbox/camel-mbox-summary.c (message_struct_new): Decode - and then re-encode the addresses, so they are consistently - formatted. - - * camel-mime-utils.c (header_decode_mailbox): Store the address in - a _header_address. And try to get a comment-stored name if there - is one. - (header_decode_address): Actually return an address. - (header_to_decode): Renamed to header_address_decode() - (header_mailbox_decode): New function to get a single mailbox. - (header_mime_decode): Return the major/minor value, as - appropriate. - (header_address_new, and friends): Whole bunch of utility - functions for working with the address thingies. - (header_decode_domain): Free the string header, and dont expand - '.' into ' . '. - - * camel.c (camel_init): No longer call - data_wrapper_repository_init. - - * camel-medium.c (write_to_stream): Moved (back) to - camel-mime-part. - (add_header): - (set_header): - (remove_header): - (get_header): Make all these abstract, and spit warnings if - called. I guess it could manage the list, but well, it doesn't. - - * camel-medium.h (struct _CamelMedium): Dont store headers here, - the implementor is the only one who knows their format. - (CamelMediumClass): Changed header values to be void *'s. They - need not be strings? - - * camel-simple-data-wrapper.c (construct_from_stream): And we're - back. Set the output stream. - (construct_from_parser): Moved to camel-mime-part-utils. - - * camel-mime-part-utils.c - (camel_mime_part_construct_content_from_parser): Create the - contents of multipart and simple messages. - (camel_mime_part_construct_content_from_parser): Oops, this was - totally screwed up, try creating the right cotnent on the right - object. - - * camel-multipart.c (construct_from_parser): Moved to - camel-mime-part-utils. - (separate_part): Removed. - - * camel-mime-part.c (construct_from_stream): Back again! This now - switches over to using a mime parser for any mime parts, only. - (my_write_to_stream): Write our headers and so forth here. - (add_header): Add header directly, parent class is abstract. - (remove_header): Ditto. - (set_header): Ditto. - - * camel-data-wrapper.c (camel_data_wrapper_construct_from_stream): - Remade abstract. - (camel_data_wrapper_construct_from_parser): Moved to - camel_mime_part. - - * camel-data-wrapper.h: Put back construct_from_stream. - - * camel-mime-part.h: Put construct_from_parser in here, the - data-wrapper shouldn't know about mime. Ok, so now to undo half - of the last hours changes ... duh. - -2000-04-23 Dan Winship <danw@helixcode.com> - - * camel-mime-utils.c (header_to_decode, header_mime_decode): fix - some obvious minor bugs noted by -Wall. - -2000-04-23 NotZed <NotZed@HelixCode.com> - - * providers/pop3/camel-pop3-folder.c (get_message_by_number): Use - construct_from_stream instead of set_input_stream(). - - * camel-simple-data-wrapper-stream.c - (camel_simple_data_wrapper_stream_construct): REmoved the destroy - callback code. - (wrapper_destroy_cb): Removed. - - * camel-simple-data-wrapper.h: Add prototype for _construct() - method. - - * camel.c: Include unicode.h to kill a warning. - - * camel-data-wrapper.h (CameldataWrapperClass): Removed - construct_from_stream virtual method. - Removed get/set input stream. - - * data-wrapper-repository.[ch]: Removed&from build. Obsoleted? - The justification as is follows: It is mixing storage - protocol/format with message architecture. It really just doesn't - serve any purpose, as each medium implementor will have to have its - own type->handler mapping, and the only current implementor, - mimepart has a very simple structure and no need for this. - - * camel-medium.c (write_to_stream): Moved here from most of the - stuff in camel-mime-part. Well, the MEDIUM is the one that knows - what the headers are, and the content is, let it write it out. - - * camel-mime-part-utils.c (camel_mime_part_construct_content): - Copied from camel-mime-part.c, removed handling of message - followon state (moved to camel-mime-message). - (camel_mime_part_construct_content_from_parser): Renamed from - construct_content. - (camel_mime_part_construct_headers_from_stream): - (camel_mime_part_construct_content_from_stream): - (camel_mime_part_store_stream_in_buffer): Removed. Replaced by - the new construct from parser stuff. - - * camel-mime-message.c (construct_from_parser): Do - construct_from_parser for mime-message. - (_write_to_stream): Set the mime-version header for medium to - write out, rather than writing it out ourselves. - - * camel-data-wrapper.c (set_mime_type_field): Ref the - content_field when we get it? - (construct_from_stream): Removed. - (camel_data_wrapper_construct_from_stream): Changed to a helper - function, creates a mime_parser, and constructs from that. - (set_input_stream): Removed. - (camel_data_wrapper_set_input_stream): Removed. - (get_input_stream): Removed. - (camel_data_wrapper_get_input_stream): Removed. - - * camel-mime-parser.c (camel_mime_parser_unstep): New function. - Cause a subsequent call to mime_parser_step() to return the same - state over again. - - * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): - Initial test code using the mime parser to construct the message. - (_get_message_by_uid): Use construct_from_stream() instead of - creating our own parser. - - * camel-mime-part.c (construct_from_parser): part constructor. - (camel_mime_part_construct_content): Basically a simpler - replacement for the datawrapper repository. - (camel_mime_part_init): Set the default type to text/plain. - (camel_mime_part_construct_content): Removed to - camel-mime-part-utils.c - (my_get_output_stream): Removed. The streeam is in the - data-wrapper. - (my_get_content_object): Removed. The content object is stored in - the medium. If none is there, the object wasn't created properly. - (my_write_content_to_stream): Removed. The content object is the - one that knows how to write itself out!!!!!!!! - (my_write_to_stream): Remove the base header writing stuff - has - been moved to camel-medium, where it belongs. This can just be - used to check for mandatory headers. - (my_construct_from_stream): Removed. - (my_set_input_stream): What the hell, i'll remove this too. - Nobody seems to understand how it differs from create from stream, - and they both seem to serve the same purpose ... - - * camel-simple-data-wrapper.c (construct_from_parser): Initial - implementation of a content constructor. - (construct_from_stream): Removed! Job taken over by - construct_from_parser. - - * camel-multipart.c (construct_from_parser): Multipart - construction routine. - (camel_multipart_init): Set the default multipart type to - multipart/mixed. Duh, no subtype is not allowed anyway. - (set_input_stream): REmoved. Replaced by construct_from_parser. - -2000-04-22 Dan Winship <danw@helixcode.com> - - * camel-multipart.[ch]: clean, document, etc. - (camel_multipart_init): pick a prettier default boundary. Still - need to deal with the larger problem - -2000-04-22 NotZed <NotZed@HelixCode.com> - - * camel-mime-message.h (struct _CamelMimeMessage): Removed - send_date, and received_date, and replaced it with a time_t - 'date' (this is what the header is called), and date_offset to - store the GMT offset of the date. - - * camel-mime-message.c (camel_mime_message_set_from): Update raw - header as we go. - (_set_from): Removed. - (_get_from): Removed. - (camel_mime_message_get_from): Moved implementation here. - (camel_mime_message_get_subject): Move implementation here. - (_get_subject): Nuked. - (camel_mime_message_set_subject): Handle utf-8 input, and also - update raw header when changed. - (_set_subject): Removed. - (_set_received_date): Removed. - (camel_mime_message_set_received_date): Removed. - (_get_received_date): Removed. - (camel_mime_message_get_received_date): Removed. - (_get_sent_date): Removed. - (camel_mime_message_get_sent_date): Removed. - (camel_mime_message_get_date): New function to get the date as a - time_t/offset. - (camel_mime_message_set_date): Set the date as a time_t/offset. - (camel_mime_message_get_date_string): Get the date as a string. - (camel_mime_message_init): Initialise the current date as - 'CMAEL_MESSAGE_DATE_CURRENT'. - (_set_reply_to): Removed. - (camel_mime_message_set_reply_to): Moved implementation here. - This is still broken, reply-to can have multiple addresses. - (_get_reply_to): Removed. - (_set_field): Removed, no longer used anywhere. - (_get_field): Also removed. - (_init_header_name_table): Add the Date header. - (process_header): Also handle snooping of Date header here. - - * camel-stream-filter.c (finalise): Unref the source stream on - finalise, and also call the parent class (oops). - - * camel-mime-parser.c (camel_mime_parser_state): New function to - get the current parser state. - (camel_mime_parser_stream): Allow you to get the stream back from - the mime_parser. - (camel_mime_parser_fd): Alternative to allow you to get the fd - back from the mime_parser. - (folder_scan_init_with_stream): Properly ref/unref the stream. - (folder_scan_close): Properly unref the stream/close the fd on - exit. - (folder_scan_init_with_fd): Close the old fd if there is one. - - * camel-data-wrapper.c (camel_data_wrapper_construct_from_parser): - New method, construct a data wrapper from an initialised parser. - (construct_from_parser): Empty implementation. - - * providers/mbox/camel-mbox-summary.c (message_struct_new): - Convert subject line to unicode, before storing in the summary. - (strdup_trim): Removed, no longer needed. - - * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Ref - the folder after setting it in the new message. - - * camel-mime-part.c (my_set_content_object): Have the headers - follow the content-type change here too. - (my_write_to_stream): Dont write content-type here, automatically - stored in the headers ... - (my_write_to_stream): Use header_disposition_format() to format - the content-disposition header. - (my_write_to_stream): Removed old code, all headers are now stored - in the camel-medium level, always. Need to do the same with - camel-mime-message i suppose ... - (my_write_to_stream): Write the content using the parent class, - not some weird function. - (camel_mime_part_class_init): Dont override get_output_stream. - (camel_mime_part_encoding_from_string): Bleh, make it - case-insensitive. - - * camel-mime-utils.c (header_content_type_is): Handle empty types. - (header_encode_string): Start of an implementation of the rfc2047 - encoder. It does iso-8859-1, and us-ascii, and utf-8 (others get - tricky *sigh*) - (rfc2047_encode_word): Convert a single word/string into rfc2047 - encoding. - (quoted_encode): Different quoted-printable encoding for rfc2047 - encoding of headers. - - * gmime-content-field.c (gmime_content_field_write_to_stream): Use - header_content_type_format() to format it. - -2000-04-21 NotZed <NotZed@HelixCode.com> - - * camel-mime-utils.h: Add prototype for header_param_list_free. - - * camel-recipient.c: New function to remove all the types of a - recipient list. I think this whole object needs a major review. - - * camel-mime-message.c (camel_mime_message_class_init): Removed - parse_header_pair override, override add_header instead. - (_parse_header_pair): Renamed to add_header. - (remove_header): Add this method, to make sure we keep upto date - with removed headers too. - (_set_field): If given a NULL value, clear it out. - (_set_recipient_list_from_string): Constify. - (set_header): Override set_header from camel_medium. - (process_header): Local function to handle set/add/remove of each - header we know about. - - * camel-mime-part.c (camel_mime_part_class_init): Removed - parse_header_pair setup. - (my_parse_header_pair): Moved into add_header(), removed. - (my_set_disposition): Allow a NULL disposition to clear it. - (my_set_content_id): Allow NULL content id to clear it. - (remove_header): Track removed headers. - (my_set_description): Allow NULL description to clear it. - (my_set_content_MD5): Make sure we copy the md5 value, and allow a - NULL value to reset it. - (my_set_filename): Copy the filename. - (my_set_header_lines): Removed. Nothing uses it, it doesn't - actually serve any purpose. - (camel_mime_part_set_header_lines): Ditto. - (my_get_header_lines): Ditto. - (camel_mime_part_get_header_lines): Ditto. - (camel_mime_part_class_init): Remove *_header_lines setup. - (camel_mime_part_init): Remove header_lines init. - (my_finalize): Remove header_lines finalise. - (my_write_to_stream): Write the headers here. This is just WRONG, - camel_medium should be doing this. - (my_get_output_stream): Kill a warning. - (camel_mime_part_encoding_to_string): Ditto. - (camel_mime_part_set_description): Unvirtualiase, use add_header() - to do the processing. - (my_set_description): Removed. - (set_disposition): Renamed from my_set_disposition. - (camel_mime_part_get_description): Get the descriptionf rom the - get_header method. - (my_get_description): Removed. - (my_set_filename): Removed. - (camel_mime_part_get_filename): Get the parameter from the - disposition. - (camel_mime_part_encoding_from_string): Handle NULL string. - (camel_mime_part_init): Remove reference to filename. - (my_finalize): Dont free filename. - - * camel-mime-part.h (CamelMimePartClass): Removed - parse_header_pair() method, it doesn't add anything that - add_header() can't be used for. - (CamelMimePartClass): Remove *_header_lines methods. - (struct _CamelMimePart): Remove header_lines list. - (struct _CamelMimePart): Removed filename attribute. - - * camel-medium.c (camel_medium_init): Init headers to null, not a - hashtable. - (add_header): Append the headers as a list. - (remove_header): Remove headers as a list. - (get_header): Likewise for lookup. - (free_header): Removed, no longer needed. - (finalize): Free headers using header_raw_clear(). - (camel_medium_set_header): New function, to reset and override all - values of a header with a new value. - - * camel-medium.h (struct _CamelMedium): Changed to use a - header_raw struct rather than a hash table, to store headers - (many headers can occur multiple times). - - * camel-mime-utils.c (header_raw_find_next): New function, allows - you to find multi-valued header fields. - (header_disposition_format): New function to format/create - content-disposition header string. - (header_param_list_format_append): Function to format parameter - lists into a GString. - (header_content_type_format): Function to format content-type into - a usable format. - (header_set_param): allow NULL value to remove the parameter. - (decode_token): Renamed from header_decode_token. - (header_decode_token): New interface for external use. - (quoted_decode): Made static to kill annoying warnings. - (g_strdup_len): Killed, replaced with calls to g_strndup(). - (rfc2047_decode_word): Made static to kill warnings. - (decode_coded_string): Terminated. - (g_string_append_len): Made static to kill warnings. - (header_decode_text): Made static to kill warnings. - (header_decode_text): Constify. - (rfc2047_decode_word): Constify. - (header_param): Constify. - (header_content_type_new): Copy the type/subtype strings. - (header_param_list_decode): Made static. - (header_param_list_format_append): Made static. - (quoted_decode): Constify. - (g_string_append_len): Constify. - (header_token_decode): New function to decode a single token. - - * providers/mbox/camel-mbox-summary.c (header_write): Append a - trailing \n when writing headers. - (strdup_trim): Killed a warning. - (camel_mbox_summary_set_uid): Make sure the next uid is at least 1 - higher than any existing one. - (header_evolution_decode): Use header_token_decode to get the - token. - - * camel-mime-parser.c (folder_scan_header): Strip the trailing \n - of the end of all header lines. - -2000-04-20 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-utils.[ch]: Removed. - - * providers/mbox/camel-mbox-parser.[ch]: Removed. Removed - references to it. - -2000-04-20 Dan Winship <danw@helixcode.com> - - * camel-mime-utils.c (rfc2047_decode_word): use libunicode iconv - functions rather than libc ones (since libc might not have them). - (header_decode_date): add autoconfiscation on timezone code - - * camel.c (camel_init): call unicode_init () - -2000-04-20 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-summary.c (message_struct_new): Trim - leading/trailing spaces off the raw headers. - - * MERGE NEW_PARSER branch into HEAD, fixed conflicts. - - * gmime-content-field.c (_print_parameter): Duh, removed again - (@@#$@ cvs merge). - - * camel-mime-utils.c (header_content_type_is): Constify. - (header_content_type_unref): Killed a couple warnings. - - * camel-folder.c (_init): Removed more log crap. - - * providers/Makefile.am (SUBDIRS): Removed nntp, pending fixes for - summary changes. - - * providers/mbox/camel-mbox-folder.c (_get_message_by_number): - Fixed for new summary interface. Added a warning for using this - broken api. - (_get_message_by_uid): Fixed for message new with session - vanishing. - -2000-04-19 Dan Winship <danw@helixcode.com> - - * camel-simple-data-wrapper-stream.c - (camel_simple_data_wrapper_stream_get_type): This is a subtype of - CamelSeekableStream, not CamelStream. - - * camel-seekable-substream.c: clean up a lot. - (eos): When testing for end-of-stream, reset the parent position - before testing if it is at end-of-stream, since either (a) it may - have been seek'ed to eos by someone else, or (b) we may have been - seek'ed away from eos and it hasn't been synced yet. - - * camel-medium.[ch] (camel_medium_add_header): const poison. - (Belatedly goes with my change of 2000-02-23.) - (camel_medium_init): Use g_strcase_{hash,equal} on the header - array. - -2000-04-18 Dan Winship <danw@helixcode.com> - - * camel-mime-part.c (my_set_input_stream): - * camel-data-wrapper.c (set_input_stream, set_output_stream): do - better reference counting of streams so they actually go away - when they should. - - * camel-log.[ch], *: Nuke camel log stuff. Replace calls to - CAMEL_LOG_WARNING with calls to g_warning. - - * camel-data-wrapper.[ch]: - * camel-simple-data-wrapper.[ch]: - * camel-medium.[ch]: Clean, polish, document. Most of the gtk-doc - comments added to camel-data-wrapper.c note serious problems that - need to be fixed. - -2000-04-17 Dan Winship <danw@helixcode.com> - - * camel-mime-message.[ch]: Remove the "session" field from - CamelMimeMessage. Nothing uses it, about half of the existing - calls to camel_mime_message_new_with_session pass NULL, and - there's no obvious reason for it to be there. - - * providers/MH/camel-mh-folder.c: - * providers/maildir/camel-maildir-folder.c: - * providers/mbox/camel-mbox-folder.c: - * providers/mbox/camel-mbox-utils.c: - * providers/nntp/camel-nntp-folder.c: - * providers/pop3/camel-pop3-folder.c: Use camel_mime_message_new - instead of camel_mime_message_new_with_session. - - * camel-session.c (get_store_for_protocol_with_url): Set the - exception if no provider is found. - - * camel-url.c: Add code to encode and decode %-escapes in URLs, - and do some additional correctness-checking on URL syntax. From - Tiago Antào with modifications by me. - -2000-04-14 Chris Toshok <toshok@helixcode.com> - - * providers/Makefile.am (SUBDIRS): add nntp - -2000-04-14 Christopher James Lahey <clahey@helixcode.com> - - * providers/mbox/camel-mbox-folder.c: Fix switch statement. - -2000-04-14 Chris Toshok <toshok@helixcode.com> - - * providers/nntp/camel-nntp-folder.c (_exists): always return TRUE - for now. we need to check the server response to make sure the - group exists. - (_get_message_by_uid): make sure to account for the \n we add to - the string after every line. - - * providers/nntp/camel-nntp-utils.c (get_XOVER_headers): function - to get the headers using the XOVER command. - (get_HEAD_headers): function to get the headers using the HEAD - command on each message. slooooooow. - (camel_nntp_get_headers): make this function use either XOVER or HEAD - versions depending on whether or not the server extension is present. - -2000-04-14 Dan Winship <danw@helixcode.com> - - * camel-formatter.[ch]: This didn't belong in Camel. Move to mail/ - - * Makefile.am, camel-types.h: remove references to - camel-formatter. - -2000-04-12 Matt Loper <matt@helixcode.com> - - * camel-folder-pt-proxy.c (_folder_open_cb): Print warning message - for broken function. - (_folder_close_cb): Same. - -2000-04-12 Miguel de Icaza <miguel@gnu.org> - - * Makefile.am (pthread_SRC): Use correct names for the pthread - source variables. - -2000-04-10 Dan Winship <danw@helixcode.com> - - * providers/pop3/camel-pop3-store.c (pop3_connect): fix various - bugs in APOP code (still untested) and some of the error cases. - - * camel-provider.h: Clarify what provider.protocol, provider.name, - and provider.description should be. - - * providers/mbox/camel-mbox-provider.c: - * providers/pop3/camel-pop3-provider.c: - * providers/sendmail/camel-sendmail-provider.c: - * providers/smtp/camel-smtp-provider.c: update protocols, names, - and descriptions - - * providers/mbox/camel-mbox-folder.c (_get_message_by_number): - implement get_message_by_number for the mail fetch code. - -2000-04-09 Jeffrey Stedfast <fejj@stampede.org> - - * providers/smtp/camel-smtp-transport.c: reformatted to fit - the standard indent format used by helix code - -2000-04-09 Dan Winship <danw@helixcode.com> - - * camel-movemail.c: New file with new function to dot-lock an mbox - file and copy it to a safe private directory. - -2000-04-08 Christopher James Lahey <clahey@helixcode.com> - - * providers/smtp/.cvsignore: Added a .cvsignore file. - -2000-04-08 Dan Winship <danw@helixcode.com> - - * providers/sendmail/camel-sendmail-transport.c (_send_internal): - actually record the pid returned by fork(). Noticed by clahey. - - * providers/smtp/camel-smtp-transport.c: #include <sys/param.h> - for MAXHOSTNAMELEN. (This is a stopgap: some of the uses of - MAXHOSTNAMELEN are wrong anyway...) - -2000-04-07 Jeffrey Stedfast <fejj@stampede.org> - - * providers/smtp/camel-smtp-transport.c: fixes to numerous bugs; - should now build fine. - * providers/Makefile.am: Readded smtp now that smtp builds without - error. - -2000-04-20 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-summary.c - (camel_mbox_summary_next_uid): Public function to get the next - uid, makes sure its saved to disk too. - - * camel-mime-part.c (my_finalize): Fix disposition crap with a - real disposition. - (my_set_disposition): Likewise. - (my_get_disposition): And here. - (my_write_to_stream): And here, needs more cleanup. - - * providers/mbox/camel-mbox-folder.c (_append_message): Assign a - new uid at this point. - - * gmime-content-field.c (gmime_content_field_write_to_stream): - Make something up if we have an invalid/missing content type - (i.e. text/plain). - -2000-04-19 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-folder.c (_delete): Fixed completely - broken switch() syntax, only compiled because errno is a macro on - some systems. - (_list_subfolders): Likewise. - -2000-04-18 NotZed <NotZed@HelixCode.com> - - * camel-mime-parser.c (folder_scan_init): init stream to null. - - * providers/mbox/camel-mbox-summary.c - (CAMEL_MBOX_SUMMARY_VERSION): Moved to .c file, incremented. - (index_folder): Changed to have index passed via the summary. - (decode_string): Do a sanity check on the string size, so we dont - visit g_malloc()'s friendly abort(). - - * camel-folder-pt-proxy.c (camel_folder_pt_proxy_class_init): - Removed reference to set_name. - (_set_name): Removed. - - * providers/mbox/camel-mbox-utils.c - (parsed_information_to_mbox_summary): Removed. Most of this file - is about to be binned. - - * providers/mbox/camel-mbox-search.c (func_header_contains): Fixes - for changes to summary interface. - (struct _searchcontext): Remove pointer to message info, get it - straight from the mboxsummary. - (camel_mbox_folder_search_by_expression): New summary interface. - (camel_mbox_folder_search_by_expression): Uh, the summary is not - an object anymore (well not yet). - - * providers/mbox/camel-mbox-folder.c - (camel_mbox_folder_class_init): Removed set_name init. - (_set_name): Removed. - (_open): Call new summary interface. - (_close): Use new summary interface. - (_create): Removed a summary object leak. - (_get_message_count): New summary interface. - (_get_uid_list): Use new summary interface. FIXME: this is leaky. - (_get_message_by_uid): Use the new summary interface, some - cleanup. - (_append_message): Totally changed, basically just appends the - message directly, ignores the summary (for now), the summary will - fix itself up if it needs to. - (_check_get_or_maybe_generate_summary_file): Bye bye old code. - (summary_get_message_info): Implement get_message_info again, for - folder. - - * camel-folder.c (camel_folder_class_init): Removed set_name - setup. - (_set_name): Moved contents into _init. - (_init): Perform the old functions of set_name here. - - * camel-folder.h: Removed the set_name internal interface. - -2000-04-14 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-summary.[ch]: Completely replaced with - new code. - - * Makefile.am (libcamel_la_SOURCES): Removed - camel-folder-summary.[ch]. - - * camel-folder.h (struct _CamelFolder): Removed summary. - (struct _CamelFolder): Changed flags to be 1 bit bitfields. - - * camel-folder-summary.[ch]: Class removed entirely. - - * camel-folder.c (camel_folder_get_summary): Removed. - (camel_folder_summary_get_message_info): Moved from - camel-folder-summary.c - (camel_folder_summary_get_subfolder_info): Moved from - camel-folder-summary.c - - * camel-mime-parser.c (folder_scan_step): Store the start of - headers and start of from in the scan state. - (camel_mime_parser_tell_start_headers): Query the start of the - headers. - (camel_mime_parser_tell_start_from): Query the cached start of - from marker. - -2000-04-13 NotZed <NotZed@HelixCode.com> - - * gmime-content-field.c (gmime_content_field_free): Removed this - function. If its too dangerous to use, it shouldn't be here. - (gmime_content_field_ref): Also ref the embedded content-type. - (gmime_content_field_unref): Ditto to unref it. - - * camel-mime-utils.h: Add a refcount for content-type header. - - * camel-mime-utils.c (header_content_type_unref): Implement unref - for content-type. - (header_content_type_ref): Implement ref for header content type. - -2000-04-12 NotZed <NotZed@HelixCode.com> - - * gmime-content-field.h: Changed to use a _header_content_type. - Added type/subtype back for compatability with clients. - - * gmime-content-field.c: Basically a total rewrite, and now just a - thin wrapper ontop of header_content_type. - (_free_parameter): Got rid of it. - (gmime_content_field_new): Use header_content_type_* functions. - (gmime_content_field_set_parameter): Likewise. - (_print_parameter): Blow away. - (gmime_content_field_write_to_stream): Get details from the - content_type field. Should check if it needs to escape chars in - the paramter value. - (gmime_content_field_get_mime_type): Likewise. - (___debug_print_parameter): Get rid of this rather annoyingly - named function. - (gmime_content_field_get_parameter): Simplified function. - (gmime_content_field_construct_from_string): Fixed this to use a - real parser. - (gmime_content_field_is_type): New function to test if a type matches. - (gmime_content_field_construct_from_string): Track type/subtype - from subordinate content_type header struct. - - * gmime-rfc2047.[ch]: Removed. Unused. - - * camel-stream-b64.[ch]: Blown away more duplicated code. - - * Makefile.am: Removed camel-stream-b64.[ch], and - gmime-base64.[ch]. - - * camel-mime-part.c (my_get_content_object): Replaced - camel-stream-b64 with camel-stream-filter/camel-mime-filter-basic. - (my_write_content_to_stream): Replaced camel-stream-b64 with the - camel-stream-filter with an encoder. - (my_get_content_object): Also implement quoted-printable decoding. - (my_write_content_to_stream): Also implement quoted-printable - encoding. - (my_get_output_stream): Took out stream-b64 code (nothing's being - executed yet anyway). - - * gmime-base64.[ch]: Blown away. Not used, dont need it. - - * camel-mime-utils.h: Added offset for this header. Records where - it is in the source. - - * camel-mime-utils.c (header_raw_append_parse): Add offset - parameter, to store where the header is stored in the stream. - (header_raw_append): Added offset param. - (header_raw_find): Return offset, if a pointer supplied for it. - (header_raw_replace): Add offset param. - (header_content_type_new): New function, to create an empty - content type. - (header_content_type_set_param): Set a parameter in the - content-type. - (header_set_param): Generic header parameter setting function. - (header_decode_string): Handle NULL input. - - * camel-mime-parser.c (camel_mime_parser_headers_raw): New - function to get access to all the raw headers. - (folder_scan_header): Keep track of the header start position, and - store it when saving the header. - -2000-04-11 NotZed <NotZed@HelixCode.com> - - * camel-mime-utils.c: Moved a bunch of printf's to debug. - - * camel-mime-parser.c: Moved a bunch of printf's to debug. - (folder_scan_header): Detect end of each header line using the - last scanned char, and not the last scanned position. - - * camel-mime-filter-index.[ch]: Indexing filter. Indexes unicode - sequences into ibex files. - -2000-04-09 NotZed <NotZed@HelixCode.com> - - * camel-mime-part.c: Dont include gmime-base64.h - - * camel-mime-filter-charset.c (complete): Implement the completion - function. - - * camel-mime-parser.c (folder_scan_step): If we get to the end of - the body data, check any filters for outstanding completion data. - (camel_mime_parser_scan_from): Set whether we scan for "From " - headers or not. - - * camel-stream-filter.c (do_read): If we get to end of stream on - the source, then call the filtering completion function to see if - we have any more data to return. - - * camel-mime-filter-basic.c (filter): Implement quoted printable - encoding and decoding filters. - (complete): And the complete function as well. - - * camel-mime-utils.c (base64_encode_close): Also take an input - buffer, allow closing of filters. - (quoted_encode_step): First cut, simple quoted-printable encoder. - Doesn't handle trailing spaces/tabs on end of line properly yet. - (quoted_encode_close): Complete a quoted-encoding. - (is_qpsafe): New type check, for quoted-printable safe characters - (that do not need encoding). Thats all bits used in the type - table! Rebuilt the types table. - (header_content_type_is): Checks a content type against at - type/subtype match. - (header_content_type_param): Handle NULL content type pointer. - -2000-04-08 NotZed <NotZed@HelixCode.com> - - * camel-mime-filter-basic.c (filter): Implement the base64 - encoder. Problem is, there is no way to know when to close it. - Close/Reset will have to provide the same args as filter, so it can - flush remaining data *sigh* - - * camel-mime-utils.c (base64_encode_step): A rather complex base64 - encoder, fast? - (base64_step_close): Companion function to finish off the base64 - sequence. - - * camel-mime-part.c (my_write_content_to_stream): Changed to use - camel_stream_write_to_stream(). - - * camel-stream.[ch] (camel_stream_write_to_stream): From - camel_stream_b64_write_to_stream(). Fixed some infinite loop - bugs with error conditions. - - * camel-stream-b64.[ch] (camel_stream_b64_write_to_stream): Removed. - This has nothing to do with stream-b64, so i've moved it to - CamelStream. - - * camel-mime-utils.h: Add a comment about refcounting - header_content_type struct. - - * Makefile.am: Added camel-stream-filter*.[ch]. - - * camel-stream-filter.[ch]: Class to implement a generic - (multipass) filter ontop of a stream. Only implements a read-only - stream. - - * camel-mime-parser.c (camel_mime_parser_filter_add): Ref the - filter we just added. - - * Makefile.am: Added camel-mime-filter*.[ch]. - - * camel-mime-filter-charset.[ch]: A filter to preform character set - conversion (uses unicode_iconv). - - * camel-mime-filter-save.[ch]: A simple filter which will save all - data directly to a file or file descriptor. - - * camel-mime-filter-basic.[ch]: Implements the basic mime filters, - base64 and quoted-printable decoding (encoding not implemented yet). - - * camel-mime-filter.[ch]: A filtering class, which can filter streams - of data without having to copy them. Simpler than stream classes, - and can be plugged into a single stream class (when i write it). - -2000-04-07 Dan Winship <danw@helixcode.com> - - * providers/pop3/camel-pop3-store.c (pop3_connect): Clarify error - messages. - (finalize): fix a bug in camel_exception usage - (pop3_connect): Remember the password after asking for it the - first time. - -2000-04-07 NotZed <NotZed@HelixCode.com> - - * Makefile.am: Added camel-mime-parser/camel-mime-utils. - - * camel-mime-parser.c: Fast mime parser. - - * camel-mime-utils.c: Mime utility functions, and email header - parsers. - -2000-04-07 NotZed <NotZed@HelixCode.com> - - * providers/Makefile.am: Removed smtp for now, its a long way from - building. - * providers/smtp/Makefile.in: Removed file that shouldn't have been - checked in. - -2000-04-06 Matt Loper <matt@helixcode.com> - - * camel-folder-pt-proxy.c (_get_full_name): Remove exception param - from get_full_name() called, since get_full_name() was changed to - not have an exception in the last param (see dan's notes below). - (_get_name): same. - -2000-04-06 Dan Winship <danw@helixcode.com> - - * camel-store.[ch]: Reorganize the folder-fetching methods and - implement a folder cache so that multiple requests for the same - folder will yield the same CamelFolder object (as long as it - remains active). Includes some code to remove no-longer-active - folders from the cache, but it doesn't get used since nothing is - ever unref'ed in Camel right now... - - * providers/mbox/camel-mbox-store.c: - * providers/pop3/camel-pop3-store.c: update for CamelStore - changes. - - * camel-folder.[ch]: Remove the (unused) CamelException argument - from camel_folder_get_name and camel_folder_get_full_name. - (camel_folder_set_name): make this go away since changing a - folder's name after it has been created could result in it - conflicting with a separately-issued folder. - -2000-04-05 Dan Winship <danw@helixcode.com> - - * g_url_new really wanted to take a CamelException. So, rename - Gurl to CamelURL, g_url_* to camel_url_* (with camel_url_new - taking an exception), and url-util.[ch] to camel-url.[ch]. Also - force url->port to be numeric and remove camel_service_getport. (I - was confused before: the URL RFC says the port must be numeric, so - we don't want to do getportbyname.) - -2000-04-01 Dan Winship <danw@helixcode.com> - - * providers/mbox/camel-mbox-folder.c - (_check_get_or_maybe_generate_summary_file): Compare - mbox_file_size and mbox_modtime to the results of stat()ing the - mbox file, not the summary file. Duh. - (_close): Update the summary's mbox_file_size and mbox_modtime - before writing it to disk. - - * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_save, - camel_mbox_summary_load): Wow. I must have been tired when I wrote - this code. First, the comparison bug above. Second, it was using - ntohs and htons instead of ntohl and htonl. Third, I was reading - the status flag byte in two different places and thus getting out - of sync. Fourth, it was writing out field_length bytes of each - header field after having converted field_length to network byte - order, resulting in lots of random crap being appended, and the - summary files being huge. (Fortunately, since the size/modtime - comparison was biffed, the garbage summary read from disk was - always immediately discarded.) - - * providers/mbox/camel-mbox-parser.c (camel_mbox_parse_file): fix - an off-by-one error that caused the last-used UID to be reused if - the summary file was regenerated. (That one wasn't my fault. :-) - -2000-03-31 Dan Winship <danw@helixcode.com> - - * camel-stream-mem.c: implement unimplemented methods - - * gmime-content-field.c - (gmime_content_field_construct_from_string): - * data-wrapper-repository.c - (data_wrapper_repository_get_data_wrapper_type): - * camel-simple-data-wrapper.c (my_write_to_stream): - * camel-mime-part.c (my_set_input_stream): - remove debugging printf()s that no longer seem useful. - -2000-03-31 Matt Loper <matt@helixcode.com> - - * camel-formatter.c (text_to_html): Added "convert_newlines_to_br" - boolean param, to give the option of not converting '\n's to <br> - tags. This way, when we stick stuff in a <pre> tag, newlines stay - newlines. - -2000-03-30 Matt Loper <matt@helixcode.com> - - * camel-formatter.c (handle_text_plain): Use <pre> tag to force - the use of monospaced fonts. - -2000-03-30 Dan Winship <danw@helixcode.com> - - * camel-service.c (camel_service_getport): Add a htons in the - default_number case, and document the fact that the function - returns the port in network byte order. - - * providers/pop3/camel-pop3-store.c (pop3_connect): Revert - Miguel's change. The port number bug was actually somewhere - else, and the IP address copying code was fine already. - -2000-03-29 Miguel de Icaza <miguel@gnu.org> - - * providers/pop3/camel-pop3-store.c (pop3_connect): Add htons - (port), and only copy 4 bytes for the IP address to prevent a DNS - attack. - -2000-03-28 Dan Winship <danw@helixcode.com> - - * camel-seekable-substream.c - (camel_seekable_substream_new_with_seekable_stream_and_bounds): - make this return a CamelStream rather than a - CamelSeekableSubstream, because that's the way Gtk objects tend to - work. - - * camel-service.c (camel_service_gethost, - camel_service_getport): convenience functions to canonicalize - the host and port values of a service's URL. - * providers/pop3/camel-pop3-store.c: use them - - * providers/mbox/camel-mbox-folder.c - (_check_get_or_maybe_generate_summary_file): Make this work when - the inbox file doesn't yet exist. - -2000-03-27 Dan Winship <danw@helixcode.com> - - * providers/mbox/camel-mbox-folder.c (_append_message): uncomment - the call to unlink the temp file: there's no way to tell - camel_stream_fs to truncate a file, so reusing the same file was - resulting in junk at the ends of messages. - - * camel-folder.[ch]: add delete_message_by_{number,uid}. - - * providers/pop3/camel-pop3-folder.[ch]: implement - delete_message_by_uid. Add a close method to do expunging - of deleted messages if requested. - - * providers/pop3/camel-pop3-store.[ch]: support for - CamelPop3Folder::close. (You have to close the connection - in order to expunge the folder, thus the store may be - connected in the CamelService::is_connected sense when it - is not actually connected to the server.) Also some bugfixes. - -2000-03-27 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-folder.c (_append_message): Unref the - output_stream when done, close doesn't do it. - (_append_message): Clear all uid's from the appending messages, so - they are reassigned proper unique id's. - - * gmime-utils.c (get_header_array_from_stream): Actually free the - header, it is copied elsewhere. - -2000-03-26 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Added - folder parameter to function. Fixed callers. - (index_message): Index a message as it is assigned a unique id. - - * camel-mime-part.c (my_set_content_id): Make sure we malloc and - copy the content_id, otherwise *poof* - -2000-03-25 NotZed <NotZed@HelixCode.com> - - * camel-medium.c (_finalize): Another leak, unref the content if - finished with it. - - * camel-recipient.c (camel_recipient_table_free): Plug another - memory leak - actually free the recipient table. - - * camel-mime-message.c (_finalize): Plugged a memory leak with the - flags table. - - * gmime-utils.c (_store_header_pair_from_string): A simpler, more - debuggable and functionally identical header extraction function. - -2000-03-24 NotZed <NotZed@HelixCode.com> - - * gmime-content-field.c (gmime_content_field_set_parameter): - Remove the hash table entry before freeing its key and data. - -2000-03-27 Dan Winship <danw@helixcode.com> - - * providers/Makefile.am (SUBDIRS): Add pop3. - - * providers/pop3/camel-pop3-store.c: keep separate input and - output streams so the output doesn't end up being buffered. - - * providers/pop3/camel-pop3-folder.c (get_message_by_number): - finish implementing this. - -2000-03-27 Michael Meeks <michael@helixcode.com> - - * camel-mime-part.c (my_set_disposition): fix so less broken. - (my_finalize): remove dodgy disposition free. - - * camel-data-wrapper.c (my_set_mime_type_field): unref instead of - free on mime_type. - -2000-03-27 Dan Winship <danw@helixcode.com> - - * camel-service.c (camel_service_free_auth_types): new routine to - free the data allocated by camel_service_query_auth_types. - - * providers/pop3/camel-pop3-store.c (free_auth_types): implement - - * camel-stream-mem.c (camel_stream_mem_new_with_buffer): rename - camel_stream_mem_new_with_buffer to ..._with_byte_array and add a - new ..._with_buffer that takes a char * rather than a GByteArray. - - * Remove CamelStreamBufferedFs, since CamelStreamBuffer makes it - redundant. - -2000-03-25 Dan Winship <danw@helixcode.com> - - * camel-folder-summary.[ch]: change the CamelFolderSummary - interfaces to allow partial summary queries (for dealing - with very large folders). Remove the "extended_fields" from - CamelFolderInfo and CamelMessageInfo: this is better dealt - with by subtyping. - - * providers/mbox/camel-mbox-summary.[ch]: Make CamelMboxSummary a - subclass of CamelFolderSummary. Update interfaces for that. Remove - the internal/external summary distinction. Remove the (unused) md5 - checksum in the folder summary. Change the summary file format - (primarily to make it no longer byte-order dependent) and add a - version number to it so it will be easier to change in the future. - - * providers/mbox/camel-mbox-folder.[ch] - * providers/mbox/camel-mbox-search.c - * providers/mbox/camel-mbox-utils.c: update for summary changes - - * camel-exception-list.def: add - CAMEL_EXCEPTION_FOLDER_SUMMARY_INVALID - -2000-03-23 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-provider.c: Added flag to provider - initialisation, to match changed structure. - -2000-03-22 NotZed <NotZed@HelixCode.com> - - * camel-folder.[ch]: Added async search api. - - * providers/mbox/camel-mbox-search.c - (camel_mbox_folder_search_by_expression): Changed to use an - asynchronous interface. - (camel_mbox_folder_search_cancel): Cancel function for async - interface. - -2000-03-23 Dan Winship <danw@helixcode.com> - - * camel-stream-buffer.c (camel_stream_buffer_read_line): Function - to read one line of any size from a stream and return it in - allocated memory. - -2000-03-22 Dan Winship <danw@helixcode.com> - - * camel-service.c (camel_service_query_auth_types): New function - to query a service for the authentication protocols it supports. - * providers/pop3/camel-pop3-store.c (query_auth_types): implement - - * camel-provider.c (camel_provider_scan): New function to - scan the provider dir and return a list of all providers. - - * providers/pop3/camel-pop3-folder.c: fill this in partially - * providers/pop3/camel-pop3-store.c: make camel_pop3_command - return the text after "+OK"/"-ERR" and add a separate - camel_pop3_get_additional_data to get the message body or - whatever. Also make them take a CamelPop3Store rather than - a CamelStreamBuffer. - -2000-03-22 Matt Loper <matt@helixcode.com> - - * camel-formatter.c (debug): Disabled some useless debug - messaging. - -2000-03-21 Dan Winship <danw@helixcode.com> - - * providers/pop3: some initial bits of the POP3 provider, to - make Matt happy. Incomplete, untested, etc. - -2000-03-21 bertrand <bertrand@helixcode.com> - - * providers/mbox/camel-mbox-summary.c - (camel_mbox_summary_append_internal_to_external): copy the size field - - * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): initialize - message_info to NULL - - * camel-folder-summary.h: added the size field. - - * providers/mbox/camel-mbox-summary.h: - added the received_date field. - - * providers/mbox/camel-mbox-summary.c: - documented all functions. - - * camel-folder-summary.h: name change and - new fields. - - * providers/mbox/camel-mbox-search.c: update to - conform to name change in the summary fields. - -2000-03-10 bertrand <bertrand@helixcode.com> - - * camel-service.h: cosmetic changes. - -2000-03-09 Dan Winship <danw@helixcode.com> - - * s/HelixCode/Helix Code, Inc./ in the copyrights - -2000-03-07 bertrand <bertrand@helixcode.com> - - * camel-formatter.c (handle_mime_part): - plug mem leaks due to bad documentation - of camel_content_field_get_mime_type - (print_camel_body_part): idem - (handle_multipart_alternative): idem - - * gmime-content-field.c (gmime_content_field_get_mime_type): - documentation fix. - - - * camel-mime-part.c (my_finalize): unref the - content_input_stream if any. - -2000-03-06 bertrand <bertrand@helixcode.com> - - * camel-stream-fs.c (_seek): fix a bogus calculation - in the return position. - -2000-03-05 bertrand <bertrand@helixcode.com> - - * camel-session.h: cosmetic fixes. - - * camel-stream-fs.c (_read): - (_seek): fixed the current position so that it refers - to the current position in the stream, not in its parent. - -2000-03-04 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-search.c - (camel_mbox_folder_search_by_expression): Ref the summary - after we have got it. - -2000-03-04 bertrand <bertrand@helixcode.com> - - * camel-mime-part.c (my_write_content_to_stream): - stream the raw content instead of nothing if the encoding - is not supported. - - * camel-stream-fs.c (_seek): handle eos more - properly. - - * camel-formatter.c (get_bonobo_tag_for_object): - bonobo-goad-id is the good key to look for. - (get_bonobo_tag_for_object): close the <object> tag. - (get_bonobo_tag_for_object): the correct syntax for the - to set a parameter inside an <object> tag is : - <object classid="..."> <param name="uid" value="..."> <param ...> - </object> - -2000-03-03 bertrand <bertrand@helixcode.com> - - * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): - use set_input_stream instead of construct_from_stream - to feed the message object. - - * camel-data-wrapper.c (my_write_to_stream): reset output stream. - (my_set_input_stream): unref the previous input stream. - use the set_output_stream for default behaviour. - (my_set_output_stream): unref previous output stream. - - * camel-mime-part.c (my_write_content_to_stream): reset content - object output stream. - -2000-03-03 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Make - sure we open with create with a creation mask. - -2000-03-01 NotZed <NotZed@HelixCode.com> - - * camel-mime-part-utils.c - (camel_mime_part_construct_content_from_stream): DO NOT assert on - content type, we have fallback code 4 lines below it ... *sigh* - -2000-02-29 NotZed <NotZed@HelixCode.com> - - * Makefile.am (libcamelinclude_HEADERS): Added camel-stream-buffer - to build. - - * camel-stream-buffer.[ch]: Generic buffer which can be applied to - any stream. - -2000-03-03 bertrand <bertrand@helixcode.com> - - * camel-formatter.c (handle_image): in the case - of images, put the content object output stream - in the url. This allows the message browser - to show inline images. - - * camel-stream-b64.c (my_read_encode): fixed state - 0 keep value. - -2000-03-02 bertrand <bertrand@helixcode.com> - - * camel-stream-b64.c (my_read_encode): don't forget to - set the state to 0 after 3. - (my_read_encode): don't forget to encode, even in state 3. - - * camel-simple-data-wrapper.c: static functions are prefixed - with my_ instead of _ - * camel-multipart.c: static functions are prefixed - with my_ instead of _ - (my_write_to_stream): commented. - (my_write_to_stream): warning in case the boudary is set - but is a zero length string. - - * camel-mime-part.c (camel_mime_part_encoding_from_string): - remove debug trace. - - * camel-mime-part.c: Replaced all static functions - with name begining with _ by the same name begining - with "my_" to prevent the possible conflicts - with system symbols Dan warned us about. - - * camel-stream-b64.c (camel_stream_b64_write_to_stream): - use CamelStreamB64 type for the input stream. - - * camel-mime-part.c (_get_content_object): remove - debugging trace - (_write_content_to_stream): implement the b64 - encoding the new way (that is using camel_stream_b64) - - * camel-data-wrapper.c (my_write_to_stream): - fix implementation so that it writes properly - to the output stream even. - - * camel-stream-b64.c (camel_stream_b64_write_to_stream): - fix implementation. - -2000-02-29 bertrand <bertrand@helixcode.com> - - * camel-stream-b64.c (camel_stream_b64_write_to_stream): new - utility function. - - * camel-data-wrapper.c (_write_to_stream): default - implementation. - - * gmime-utils.c (_store_header_pair_from_string): - revert strange changes. - - * camel-stream-b64.c (my_read_decode): set eos to true when we - have read the whole input stream. - (my_reset): set eos to FALSE. - -2000-02-28 NotZed <NotZed@HelixCode.com> - - * camel-mime-part.c (_parse_header_pair): Dont free this either. - - * camel-medium.c (_remove_header): Ugh, dont free the header - before we actually remove it. - (_add_header): Ugh, dont free hashtable entries which may be - duplicated (hash_insert _will_ reference that memory). - - * string-utils.c (string_trim): Trimming a 0-length string is not - an error. - - * camel-mime-message.c (_parse_header_pair): Fixed very broken - memory handling of header_name/value. - - * providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): - Initialise end_of_last_message always. - (camel_mbox_copy_file_chunk): Stop trying to read if we run out of - data, rather than looping forever. - (camel_mbox_write_xev): Use an open flag when opening with create. - - * camel-folder.c (camel_folder_search_by_expression): No, its not - a fatal error to search on a non-searchable folder, you just dont - get any matches. - (_open): Dont open an opened folder (i dont see why this is really - a bug, but what the hell ...) - - * providers/mbox/camel-mbox-folder.c (_init): Set search cap on. - (_open): Call parent class to perform open. Remove folder-open - check to parent instead. - (_create): open takes a creation mask, dont use umask to try and - set the open mode. - (_delete): Dont bother checking folder==NULL, its already been - checked on the external interface (changed to an assertion, this - would have to be a camel bug). - (_delete_messages): Likewise. - (_create): Ditto. - (_init): Dont go and clear all the paths and shit that the parent - open just setup for us. - (_delete_messages): Get rid of more umask stuff. - (_append_message): Make sure we pass file mode to open with create. - (_append_message): Cleaned up some indenting to make it readable. - - * camel-stream-b64.c (my_read_encode): Fixed a typo. - - * providers/mbox/camel-mbox-search.c: Changed to use e-sexp, - rather than filter-sexp. - -2000-02-28 bertrand <bertrand@helixcode.com> - - * camel-stream-b64.c (my_read_encode): encoding - filter. - -2000-02-23 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel-stream-b64.c: changed the __static - suffix into a my_ prefix. - (camel_stream_b64_set_mode): reset the persistent - status. - (my_read_decode): remove superfluous % - - * providers/mbox/camel-mbox-utils.c (camel_mbox_copy_file_chunk): - fix exception description message. - -2000-02-24 Dan Winship <danw@helixcode.com> - - * camel-session.c: Add camel_session_get_transport_for_protocol. - - * camel-transport.h: - * camel-transport.c: Add an abstract CamelTransport class. - - * providers/sendmail/*: A CamelTransport that uses sendmail - to deliver mail. - -2000-02-24 Dan Winship <danw@helixcode.com> - - * camel-folder.c: use CamelExceptions for run-time errors, not - incorrect code. Don't bother validating that an object exists from - inside one of its methods, since you couldn't have gotten there if - it didn't. Fix some code style bugs. - - (_init): Rename init_with_store to init and add parent_folder, - separator, and name arguments. - (_set_name): Get separator from self, not parent_store now. - - * camel-store.h: - * camel-store.c: Remove get/set_separator. - - * providers/mbox/: Update for above. - -2000-02-23 Dan Winship <danw@helixcode.com> - - * camel-medium.c (_finalize): Free the data in the headers hash - table. - (_add_header): g_strdup the header name and value when adding it. - - * camel-mime-part-utils.c - (camel_mime_part_construct_headers_from_stream): Free the header - data after calling camel_medium_add_header, since it will have - g_strdup()ed it itself. - -2000-02-22 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-search.c: Dont compile by default. - - * providers/mbox/Makefile.am: Fuck off the filter code. - -2000-02-22 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel-stream-b64.c (read_decode__static): - don't read the char if we reached the length - of the output buffer. Hours lost on this - %$!@# bug : 3.5 - - * camel-folder.c (camel_folder_get_subfolder): - (camel_folder_create): - (camel_folder_delete): - (camel_folder_delete_messages): - (camel_folder_list_subfolders): - (camel_folder_expunge): - (camel_folder_get_message_by_number): - (camel_folder_get_message_count): - (camel_folder_append_message): - (camel_folder_copy_message_to): - (camel_folder_get_summary): - (camel_folder_get_message_uid): - (camel_folder_get_message_by_uid): - (camel_folder_get_uid_list): - Check folder state (open/close) and raise an - exception if it is not ok. - - * providers/mbox/camel-mbox-folder.c (_create): - create the file and the path with two different - names. - - * camel-folder.c (_create): handle the case - when the folder name starts with '/' - - * camel-exception.c (camel_exception_new): use - (void) instead of () in decl. - - * camel-exception.h: cosmetic fixes. - - * camel-exception.c (camel_exception_init): new routine. - Fix a bug in mail/message-list.c - - - * camel-folder.h: cosmetic changes. - - * camel-stream-b64.c (reset__static): added a - reset method. Thanks message-browser to find - so much bugs :) - - * providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): readd - Unicode libs. - -2000-02-21 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel-formatter.c (lookup_unique_id): - awful hack to test get_output_stream. - * camel-stream-b64.[ch] : - b64 encoding/decoding is now implemented as - a stream. - - -2000-02-21 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel-seekable-substream.c (_reemit_parent_signal): - emit "data_available" when parent stream emits it. - - -2000-02-21 NotZed <NotZed@HelixCode.com> - - * providers/mbox/Makefile.am: Uh, fixed LIBADD again. What was - there was never ever going to work, wasn't it tested? - - -2000-02-21 Dan Winship <danw@helixcode.com> - - * camel-session.h: (struct _CamelSession): Add authenticator. - - * camel-session.c (camel_session_new): Add authenticator. - (camel_session_query_authenticator): New function to query the - session authenticator for password, etc, information. - -2000-02-21 Dan Winship <danw@helixcode.com> - - * camel-session.c: add CamelExceptions to several functions. Use - camel_session_new to initialize the session and URL fields of - created CamelStores as appropriate. - - * camel-store.h: - * camel-store.c - * camel-service.h: - * camel-service.c: Move the session and url (and associated - functions) from CamelStore to CamelService. Add url_flags to - CamelService so subclasses can specify which URL components - are mandatory for them. Add camel_session_new for - camel_session_get_store* to use. - - * providers/mbox/camel-mbox-folder.c: - * providers/mbox/camel-mbox-store.c: - * providers/mbox/camel-mbox-store.h: Update for above changes. - - * camel-exception-list.def: Once camel is being used for real, - exceptions won't be renumberable. So renumber them now to make - more room to add exceptions to the various categories later, and - add a big warning message. - -2000-02-20 Dan Winship <danw@helixcode.com> - - * providers/mbox/Makefile.am: add libibex back to - libcamelmbox_la_LIBADD - -2000-02-18 NotZed <NotZed@HelixCode.com> - - * providers/mbox/camel-mbox-search.h - (camel_mbox_folder_search_by_expression): Added exception to call, - and fixed caller. - - * providers/mbox/camel-mbox-search.c - (camel_mbox_folder_search_by_expression): Major changes, to use - the sexp evaluator from filter/filter-sexp.c to implement the - searching. - (func_body_contains): Changed to support multiple strings in 1 - command (results or'd together) - - * url-util.c (g_url_new): Fixed a typo (colon == 0 isn't right), - and made it so full url's are absolute pathed (Dan, this is how it - has to work!). Also, always include a path part, even if it is an - empty string. - -2000-02-18 Dan Winship <danw@helixcode.com> - - * camel/camel-types.h: New header with the typedefs for all camel - classes. Now the class headers can just include this and the - header for the parent type. This makes it possible for - CamelService to include a CamelSession without creating an - #include loop. - - * camel/*: - * composer/e-msg-composer-attachment-bar.h: - * mail/folder-browser.c: - * mail/message-list.c: frob #includes to match the new reality - -2000-02-17 Dan Winship <danw@helixcode.com> - - * camel/camel-service.h: - * camel/camel-service.c: Make camel-service us a Gurl internally. - Remove the login/password interfaces and instead provide - camel_service_connect_with_url. Add CamelExceptions - -2000-02-17 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/camel-formatter.c (handle_text_plain): - (handle_text_html): use camel_stream_reset instead - of seek. The formatter should be able to work - with all streams, not only seekable streams. - In the case where some provider implementation - would not be able to provide a reset method - to their stream, implementors would have - to find a workaround. - - * camel/camel-session.c (camel_session_new): use - (void) instean of () in function decl. - - * camel/camel-folder.c: ifdef async operation - related code. - - * camel/camel-seekable-stream.c (_seek): added a warning. - (_reset): default implementation of reset for seekable - stream. - - * camel/camel-mime-message.h: set_received_date declaration fix. - cosmetic changes. - - * camel/providers/mbox/camel-mbox-provider.c (camel_provider_module_init): - use (void) instead of (). - - * camel/camel-stream.c (camel_stream_reset): - new method for CamelStream. - -2000-02-17 Dan Winship <danw@helixcode.com> - - * camel/url-util.c (g_url_to_string): New function to convert - a Gurl back into a char *. - -2000-02-17 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/camel-formatter.c (handle_text_plain): - revamped so that it uses the output stream - of the data wrapper - (handle_text_html): ditto. - - - * camel/camel-simple-data-wrapper.h: - * camel/camel-simple-data-wrapper.c (camel_simple_data_wrapper_new): - use (void) instead of (). - (_get_output_stream): simple implementation. - -2000-02-16 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/camel-data-wrapper.c (_set_input_stream): ref input stream - (_set_output_stream): ref output stream - (_finalize): unref input and output streams - - * camel/camel-seekable-substream.c (_set_bounds): don't - seek the begining of the substream. - (_eos): fix eos condition testing. - (_finalize): unref parent stream - (_init_with_seekable_stream_and_bounds): ref parent stream - - * camel/gstring-util.c (g_string_equal_for_hash): - (g_string_equal_for_glist): return type is int. - - * camel/camel.h: - * camel/camel.c (camel_init): use (void) - instead of (). - -2000-02-16 NotZed <NotZed@HelixCode.com> - - * providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Added - libfilter to link line (temporarily?). Required for - filter-sexp. - -2000-02-15 bertrand <bertrand@helixcode.com> - - * camel/camel-multipart.c (_localize_part): - this routine replaces the _read_part routine - and does not store the part in a buffer. - (_set_input_stream): use the set_input_stream - instead of the construct_from_stream. - each bodypart is given an input stream. - - * camel/camel-mime-part-utils.c: - include the data-wrapper-repository header. - (camel_mime_part_construct_content_from_stream): - use the set_input_stream instead of the - construct_from_stream method. - - * camel/camel-seekable-substream.c (_set_bounds): - cur position is set to 0 not to inf_bound. - -2000-02-15 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/camel-mime-part.c: include gmime-base64.h - various compilation and runtime fixes. - (_set_input_stream): store the input substream - for the content object. - - * camel/camel-data-wrapper.h: declare the - set/get function on input/output stream. - - * camel/camel-mime-part.c (_get_content_object): - don't use a temporary mem stream. - - * camel/camel-seekable-substream.c (_seek): - (_eos): - (_read): the substream can be unlimited in length - - * camel/camel-data-wrapper.c (camel_data_wrapper_class_init): - set the get/set_input/output_stream methods. - - * camel/camel-multipart.c (_construct_from_stream): - camel_stream_seek -> camel_seekable_stream_seek - -2000-02-14 Miguel de Icaza <miguel@gnu.org> - - * camel/providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Add - the unicode libraries as well. - - * camel/camel-provider.c (camel_provider_register_as_module): Add - error reporting here. Desire to use Solaris increases. Hair loss - in the last two hours: 5,400. - - * camel/providers/mbox/camel-mbox-provider.c - (camel_mbox_get_provider): Renamed function. - - * camel/camel.h: All include files use camel/ now here. - - * camel/providers/mbox/Makefile.am: Drop all the dynamism from - Camel, and make this a standard library. - -2000-02-14 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/gmime-utils.c (get_header_array_from_stream): use the - eos stream method. - (gmime_read_line_from_stream): ditto. - - * camel/camel-stream-fs.h (struct ): add the eof field - cosmetics changes. - - * camel/camel-stream-fs.c (camel_stream_fs_init): set eof. - (_read): set eof on end of file. - (_eos): implemented. - - * camel/gmime-utils.c (get_header_array_from_stream): - make a blocking version of the header parser. - When the fs stream uses gnome-vfs, this should - be changed. - (gmime_read_line_from_stream): ditto. - -2000-02-11 bertrand <Bertrand.Guiheneuf@aful.org> - - * camel/camel-stream-fs.c: - everywhere, when using the cur_pos field, do it - on the CamelSeekableStream object. - (_seek): small fix. - - * camel/camel-seekable-stream.c (camel_seekable_stream_seek): - s/camel_stream_seek/camel_seekable_stream_seek/g - - * camel/camel-seekable-stream.h: - (struct ): added a field to store the - current position. - - * camel/camel-seekable-stream.c (camel_seekable_stream_get_current_position): - New function. Allows to get the current position - of a seekable stream. - - -2000-02-13 NotZed <notzed@zedzone.helixcode.com> - - * providers/mbox/camel-mbox-search.c: New file, implements the - search api for mbox folders. - - * providers/mbox/Makefile.am: Link with ibex. - - * camel-folder.c (camel_folder_has_search_capability): Api - additions. - (camel_folder_search_by_expression): Ditto. - -2000-02-12 NotZed <notzed@zedzone.helixcode.com> - - * providers/mbox/camel-mbox-folder.c (_set_name): Setup index - filename as well. - (_init_with_store): Init index filename. Hmm, none of these - names ever seem to get free'd (FIXME?) - - * providers/mbox/camel-mbox-folder.h: Add index file name. - -2000-02-12 NotZed <notzed@helixcode.com> - - * camel-folder.h: Add folder search functions. - - ** Created ChangeLog just for camel ** - - refer to ../ChangeLog for changes prior to this date. |