aboutsummaryrefslogtreecommitdiffstats
path: root/tools/verify-evolution-install.sh
diff options
context:
space:
mode:
Diffstat (limited to 'tools/verify-evolution-install.sh')
-rwxr-xr-xtools/verify-evolution-install.sh472
1 files changed, 0 insertions, 472 deletions
diff --git a/tools/verify-evolution-install.sh b/tools/verify-evolution-install.sh
deleted file mode 100755
index 7bfcb1cb5b..0000000000
--- a/tools/verify-evolution-install.sh
+++ /dev/null
@@ -1,472 +0,0 @@
-#!/bin/sh
-#
-# Verifies that Evolution and all its supporting components
-# are installed correctly. A tool to weed out common
-# build problems.
-#
-# (C)2000 Helix Code, Inc.
-# Author: Peter Williams <peterw@helixcode.com>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Library General Public License
-# as published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-problem() {
- echo "I detected the following problem: $problem"
- if test x"$rpmsystem" = xyes ; then
- echo "Suggested solution via RPM: $rpmsolution"
- fi
- if test x"$debsystem" = xyes ; then
- echo "Suggested solution via DEB: $debsolution"
- fi
- echo "Suggested solution via sources: $srcsolution"
- if test x"$comment" != x ; then
- echo ""
- echo "$comment"
- fi
- exit 1
-}
-
-check_config() {
- #bigname=$1
- #cfgname=$2
- #pkgname=$3
- eval $1=\${$1-$2}
-
- eval val=\$$1
- if type $val </dev/null 1>/dev/null 2>&1 ; then
- :
- else
- problem="Cannot find $2 or it ($val) is not executable"
- rpmsolution="Install or reinstall the '$3-devel' package"
- debsolution="Install or reinstall the $3 development libraries." #FIXME
- srcsolution="Get the latest release of $3 and install it."
- comment="If you know that $3 is installed, try setting the
-environment variable $1 to its location"
- problem
- fi
-}
-
-check_prefix() {
- #othercfg=$1
- #othername=$2
- #strict=$3
-
- eval otherpfx=\`\$$1 --prefix\`
- if test x"$3" = xstrict ; then
- if test x"$otherpfx" != x"$gl_prefix" ; then
- problem="gnome-libs and $2 do not share the same prefix"
- rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
- debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
- srcsolution="Re-run 'configure' in $2's source directory with the flag '--prefix=$gl_prefix'."
- problem
- fi
- else
- IFSbak="$IFS"
- ok="$GNOME_PATH:$gl_prefix"
- IFS=":"
- passed=no
-
- for e in $ok; do
- if test x"$e" != x ; then
- if test $otherpfx = $e ; then
- passed=yes;
- fi
- fi
- done
-
- IFS="$IFSbak"
-
- if test x"$passed" = xno ; then
- problem="$2 is not in GNOME_PATH or the same prefix as gnome-libs"
- rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
- debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
- srcsolution="Re-run 'configure' in $2's source directory with the flag '--prefix=$gl_prefix'."
- comment="Try exporting an environment variable 'GNOME_PATH' with the prefix of $2."
- problem
- fi
- fi
-}
-
-check_sysconf() {
- #othercfg=$1
- #othername=$2
-
- eval othersysc=\`\$$1 --sysconfdir\`
- if test x"$othersysc" != x"$gl_sysconf" ; then
- problem="gnome-libs and $2 do not share the same sysconfdir"
- rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
- debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
- srcsolution="Re-run 'configure' in $2's source directory with the flag '--sysconfdir=$gl_sysconf'."
- problem
- fi
-}
-
-check_oafinfo() {
- #basename=$1
- #othername=$2
-
- base=$1.oafinfo
- search="${gl_datadir}/oaf:$OAF_INFO_PATH"
- IFSback="$IFS"
- IFS=":"
- ok=no
-
- for ping in $search ; do
- if test x"$ping" != x ; then
- if test -f $ping/$base ; then
- file=$ping/$base
- ok=yes
- fi
- fi
- done
-
- IFS="$IFSback"
-
- if test x$ok = xno ; then
- problem="$1.oafinfo isn't installed into Gnome's prefix or in OAF_INFO_PATH"
- rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
- debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
- srcsolution="Re-run 'configure' in $2's source directory with the flag '--datadir=$gl_datadir'."
- comment="Another likely cause of this problem would be a failed installation of $2.
-You should check to see that the install succeeded. You may also add the
-location of $1.oafinfo to the environment variable OAF_INFO_PATH"
- problem
- fi
-
- iids=`cat $file |grep iid= |sed -e 's,.*iid="\([^"]*\)".*,\1,'`
- IFS="
-"
-
- tempfile="temp-$$-verifier"
- for iid in $iids ; do
- #echo "Attempting to activate IID \"$iid\"..."
- $OAF_CLIENT -qs "iid == '$iid'" >$tempfile
- result=`cat $tempfile |grep exception`
- if test x"$result" != x ; then
- problem="The component $2 (in $file) couldn't be activated by OAF"
- rpmsolution="Verify that $file is valid and that oaf and $2 are correctly installed."
- debsolution="Verify that $file is valid and that oaf and $2 are correctly installed."
- srcsolution="Verify that $file is valid and that oaf and $2 are correctly installed."
- comment="$OAF_CLIENT reported this:
-`cat $tempfile`"
- rm -f $tempfile
- problem
- fi
- done
- rm -f $tempfile
-
- IFS="$IFSback"
-}
-
-check_bin() {
- #name=$1
- #othername=$2
-
- if test ! -f ${gl_bindir}/$1 ; then
- problem="The binary $1 isn't installed into Gnome's prefix"
- rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
- debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
- srcsolution="Re-run 'configure' in $2's source directory with the flag '--bindir=$gl_bindir'."
- comment="Another likely cause of this problem would be a failed installation of $2.
-You should check to see that the install succeeded."
- problem
- fi
-}
-
-check_no_gnorba() {
- #libs=$1
- #othername=$2
-
- ping=`echo $1 |grep 'gnorba'`
-
- if test x"$ping" != x ; then
- problem="$2 was built using Gnorba, not OAF"
- rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
- debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
- srcsolution="Update $2 and re-run 'configure' in its source directory with the flag '--enable-oaf=yes'."
- problem
- fi
-}
-
-########################################
-
-versionparse3() {
- #inst_version=$1
- #reqd_version=$2
- #package=$3
-
- inst_version=`versiongrab3 "$1"`
- inst_major=`echo $inst_version |sed -e 's,\([0-9][0-9]*\)\..*\..*,\1,'`
- inst_minor=`echo $inst_version |sed -e 's,.*\.\([0-9][0-9]*\)\..*,\1,'`
- inst_micro=`echo $inst_version |sed -e 's,.*\..*\.\([0-9][0-9]*\),\1,'`
-
- reqd_version=`versiongrab3 "$2"`
- reqd_major=`echo $reqd_version |sed -e 's,\([0-9][0-9]*\)\..*\..*,\1,'`
- reqd_minor=`echo $reqd_version |sed -e 's,.*\.\([0-9][0-9]*\)\..*,\1,'`
- reqd_micro=`echo $reqd_version |sed -e 's,.*\..*\.\([0-9][0-9]*\),\1,'`
-
- ok=yes
- if test $inst_major -lt $reqd_major ; then
- ok=no
- elif test $inst_major -gt $reqd_major ; then
- ok=yes
- elif test $inst_minor -lt $reqd_minor; then
- ok=no
- elif test $inst_minor -gt $reqd_minor; then
- ok=yes
- elif test $inst_micro -lt $reqd_micro; then
- ok=no
- fi
-
- if test x$ok = xno ; then
- problem="Package $3 is not new enough ($1 detected, $2 required)"
- rpmsolution="Obtain a newer version and install it"
- depsolution="Obtain a newer version and install it"
- srcsolution="Obtain a newer version and install it"
- comment="If you think you have a newer installation, make sure that the
-package is not installed twice."
- problem
- fi
-}
-
-versiongrab3() {
- echo $1 |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*,\1,'
-}
-
-check_module3() {
- #$1=gnome-libs name
- #$2=package
- #$3=version
- $GNOME_CONFIG --modversion $1 1>/dev/null 2>/dev/null </dev/null
- if test x$? != x0 ; then
- problem="Package $2 doesn't seem to be installed."
- rpmsolution="Get and install the packages '$2' and '$2-devel'"
- debsolution="Get and install the package $2 and its development libraries" #FIXME
- srcsolution="Download the source and install the package $2"
- comment="If you think the package is installed, check that its prefix is $gl_prefix --
-${1}Conf.sh should be installed into `$GNOME_CONFIG --libdir`"
- problem
- fi
-
- instversion=`$GNOME_CONFIG --modversion $1`
-
- #eew eew hacky
- # gnome-vfs used to be versioned gnome-vfs-0.1,
- # and gnome-vfs-0.2, but then they moved to three figs--
- # now it's gnome-vfs-0.2.0
-
- if test $2 = gnome-vfs ; then
- case "$instversion" in
- gnome-vfs-0.1)
- problem="Package gnome-vfs is not new enough (0.1 detected, $3 required)"
- rpmsolution="Obtain a newer version and install it"
- depsolution="Obtain a newer version and install it"
- srcsolution="Obtain a newer version and install it"
- comment="If you think you have a newer installation, make sure that the
-package is not installed twice."
- problem
- ;;
- gnome-vfs-0.2)
- instversion="gnome-vfs-0.2.0"
- ;;
- *)
- #nothing, version is ok
- ;;
- esac
- fi
-
- versionparse3 "$instversion" "$3" "$2"
-}
-
-########################################
-
-versionparse2() {
- #inst_version=$1
- #reqd_version=$2
- #package=$3
-
- inst_version=`versiongrab2 "$1"`
- inst_major=`echo $inst_version |sed -e 's,\([0-9][0-9]*\)\..*,\1,'`
- inst_minor=`echo $inst_version |sed -e 's,.*\.\([0-9][0-9]*\),\1,'`
-
- reqd_version=`versiongrab2 "$2"`
- reqd_major=`echo $reqd_version |sed -e 's,\([0-9][0-9]*\)\..*,\1,'`
- reqd_minor=`echo $reqd_version |sed -e 's,.*\.\([0-9][0-9]*\),\1,'`
-
- ok=yes
- if test $inst_major -lt $reqd_major ; then
- ok=no
- elif test $inst_major -gt $reqd_major ; then
- ok=yes
- elif test $inst_minor -lt $reqd_minor; then
- ok=no
- fi
-
- if test x$ok = xno ; then
- problem="Package $3 is not new enough ($1 detected, $2 required)"
- rpmsolution="Obtain a newer version and install it"
- depsolution="Obtain a newer version and install it"
- srcsolution="Obtain a newer version and install it"
- comment="If you think you have a newer installation, make sure that the
-package is not installed twice."
- problem
- fi
-}
-
-versiongrab2() {
- echo $1 |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\).*,\1,'
-}
-
-check_module2() {
- #$1=gnome-libs name
- #$2=package
- #$3=version
- $GNOME_CONFIG --modversion $1 1>/dev/null 2>/dev/null </dev/null
- if test x$? != x0 ; then
- problem="Package $2 doesn't seem to be installed."
- rpmsolution="Get and install the packages '$2' and '$2-devel'"
- debsolution="Get and install the package $2 and its development libraries" #FIXME
- srcsolution="Download the source and install the package $2"
- comment="If you think the package is installed, check that its prefix is $gl_prefix --
-${1}Conf.sh should be installed into `$GNOME_CONFIG --libdir`"
- problem
- fi
-
- instversion=`$GNOME_CONFIG --modversion $1`
- versionparse2 "$instversion" "$3" "$2"
-}
-
-########################################
-
-#prep
-if test -d /var/lib/rpm ; then
- rpmsystem=yes
- RPM=${RPM_PROG-rpm}
-
- $RPM --version 1>/dev/null 2>/dev/null </dev/null
- if test x$? != x0 ; then
- problem="The rpm executable ($RPM) does not seem to work."
- rpmsolution="none, if rpm doesn't work."
- debsolution="not applicable."
- srcsolution="download and install rpm manually."
- comment="If rpm really won't work then there is something wrong with your system."
- problem
- fi
-else
- rpmsystem=no
-fi
-
-if test -d /var/lib/dpkg ; then
- debsystem=yes
- #FIXME: check if deb works
-else
- debsystem=no
-fi
-
-if test x"$GNOME_PATH" != x ; then
- PATH="$GNOME_PATH:$PATH"
-fi
-
-#gnome-libs
-check_config GNOME_CONFIG gnome-config gnome-libs
-
-gl_version=`$GNOME_CONFIG --version` # |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*,\1,'`
-gl_sysconf=`$GNOME_CONFIG --sysconfdir`
-gl_prefix=`$GNOME_CONFIG --prefix`
-gl_datadir=`$GNOME_CONFIG --datadir`
-gl_bindir=`$GNOME_CONFIG --bindir`
-
-versionparse3 "$gl_version" "1.0.59" "gnome-libs"
-
-#libunicode
-check_config UNICODE_CONFIG unicode-config libunicode
-check_prefix UNICODE_CONFIG libunicode
-versionparse2 "`$UNICODE_CONFIG --version`" "0.4" libunicode
-
-#ORBit
-check_config ORBIT_CONFIG orbit-config ORBit
-check_prefix ORBIT_CONFIG ORBit
-
-#oaf
-check_config OAF_CONFIG oaf-config oaf
-check_prefix OAF_CONFIG oaf
-versionparse3 "`$OAF_CONFIG --version`" "0.4.0" "oaf"
-check_bin oafd
-
-OAF_CLIENT=${OAF_CLIENT-oaf-client}
-if type $OAF_CLIENT </dev/null >/dev/null 2>&1 ; then
- :
-else
- problem="oaf-client couldn't be found"
- rpmsolution="Install the 'oaf-devel' package"
- debsolution="Install the oaf development libraries"
- srcsolution="Make sure that oaf is installed correctly"
- comment="If you think you have oaf-client installed, try exporting an
-environment variable OAF_CLIENT pointing to it"
- problem
-fi
-
-check_oafinfo oafd oaf
-
-#gconf
-check_config GCONF_CONFIG gconf-config GConf
-check_prefix GCONF_CONFIG GConf
-versionparse2 "`$GCONF_CONFIG --version`" "0.5" GConf
-if which gconfd-1 </dev/null >/dev/null 2>/dev/null; then
- check_oafinfo gconfd-1 GConf
- check_bin gconfd-1
-else
- check_oafinfo gconfd GConf
- check_bin gconfd
-fi
-check_no_gnorba "`$GCONF_CONFIG --libs`" GConf
-
-#gnome vfs
-check_module3 vfs gnome-vfs "0.2.0"
-check_no_gnorba "`$GNOME_CONFIG --libs vfs`" gnome-vfs
-
-#gnome print
-check_module2 print gnome-print "0.20"
-check_no_gnorba "`$GNOME_CONFIG --libs print`" gnome-print
-
-#bonobo
-check_module2 bonobo bonobo "0.15"
-check_prefix "GNOME_CONFIG bonobo" bonobo strict
-check_oafinfo audio-ulaw bonobo
-check_bin bonobo-audio-ulaw bonobo
-check_no_gnorba "`$GNOME_CONFIG --libs bonobo`" bonobo
-
-#gtkhtml
-check_module2 gtkhtml GtkHTML "0.5"
-check_oafinfo html-editor-control GtkHTML
-check_bin html-editor-control GtkHTML
-check_no_gnorba "`$GNOME_CONFIG --libs gtkhtml`" GtkHTML
-
-#evolution
-check_oafinfo addressbook evolution
-check_oafinfo calendar-control evolution
-check_oafinfo evolution-mail evolution
-check_oafinfo evolution-calendar evolution
-check_oafinfo evolution-addressbook-select-names evolution
-check_oafinfo wombat evolution
-check_bin evolution-mail evolution
-check_bin evolution-calendar evolution
-check_bin evolution-addressbook evolution
-check_bin wombat evolution
-check_bin evolution evolution
-
-#done
-echo "Your Gnome system appears to be properly set up. Enjoy Evolution!"
-exit 0 \ No newline at end of file