aboutsummaryrefslogtreecommitdiffstats
path: root/cad
Commit message (Expand)AuthorAgeFilesLines
* ${RM} already has -f.Mathieu Arnold2016-10-214-4/+4
* Reassign makc's ports back to the pool.Raphael Kubo da Costa2016-10-201-1/+1
* - Update devel/tbb to version 2017.1Ganael LAPLANCHE2016-10-191-1/+1
* - Double-quote $@ to properly propagate parameters down the execution pathAlexey Dokuchaev2016-10-171-1/+1
* cad/feappv: fix after change in USES=localbase behaviorJohn Marino2016-10-171-1/+1
* cad/gmsh, cad/gmsh-occ: update to version 2.14.0Joseph Mingrone2016-10-134-21/+7
* - Switch to options helpersDmitry Marakasov2016-10-111-12/+15
* - Update to version 0.17.g20160927 [1]Pawel Pekala2016-10-093-6/+14
* Clean upAntoine Brodin2016-10-091-3/+2
* Specify which license the license file refers toJoseph Mingrone2016-10-031-1/+1
* Add LICENSE file and return PORTREVISION=1 to cad/gmsh-occJoseph Mingrone2016-10-032-0/+3
* - Update to 3.8.82Danilo Egea Gondolfo2016-10-012-4/+4
* Remove PORTREVISION after cad/gmsh update and take maintainershipJoseph Mingrone2016-09-301-2/+1
* Re-add MAKE_JOBS_UNSAFE=yesJoseph Mingrone2016-09-301-0/+2
* Update cad/gmsh to 2.13.2; fix knob issue; other changesJoseph Mingrone2016-09-307-293/+229
* Mark cad/gmsh-occ BROKEN for -CURRENT / i386.Thierry Thomas2016-09-281-0/+6
* - Update devel/doxygen to 1.8.12Antoine Brodin2016-09-282-3/+1
* - Update devel/icu to 57.1.Tijl Coosemans2016-09-244-9/+10
* - Update to 9.7.95Danilo Egea Gondolfo2016-09-182-4/+4
* - Remove unneeded MASTER_SITESDmitry Marakasov2016-09-171-1/+0
* - Update to 3.9.1Dmitry Marakasov2016-09-177-85/+6
* Release some of my ports back to the heapJohn Marino2016-09-151-1/+1
* - Switch to newly supported CC licensesDmitry Marakasov2016-09-131-4/+3
* kicad switched to GIT (still hosted on launchpad) for development.Michael Reifenberger2016-09-135-298/+95
* Most commonly used build systems support silent builds, when theyDmitry Marakasov2016-09-102-2/+0
* (Readdition of cad/freecad which was removed on 235718)Mathieu Arnold2016-09-087-0/+911
* - In Uses/linux.mk use the loop variable directly when appending toTijl Coosemans2016-09-071-1/+1
* - Replace Mk/bsd.linux-apps.mk and Mk/bsd.linux-rpm.mk withTijl Coosemans2016-09-061-2/+2
* cad/NASTRAN-95: Update license acronym and reset maintainershipJohn Marino2016-09-061-2/+2
* cad/NASTRAN-95: Fix hardcoded FC and FFLAG flags in patchJohn Marino2016-09-051-2/+2
* - Pass maintainership to Joseph Mingrone <jrm@ftfl.ca> with his permission.Stephen Montgomery-Smith2016-09-011-1/+1
* Update to version 3.9.0Pawel Pekala2016-08-269-5/+88
* cad/NASTRAN-95: Report version as FREEBSD rather than LINUXJohn Marino2016-08-231-0/+5
* Update to 3.3.76Niclas Zeising2016-08-212-4/+4
* Update to 2.11Maho Nakata2016-08-177-43/+262
* New port: cad/NASTRAN - NASA's classic FEA program.Pedro F. Giffuni2016-08-129-1/+1
* New port: cad/NASTRAN - NASA's classic FEA program.Pedro F. Giffuni2016-08-129-0/+608
* Update to version 3.8.1Pawel Pekala2016-08-042-4/+4
* Try to fix shared library links.Michael Reifenberger2016-08-033-7/+23
* Update to version 8.2.20160715Pawel Pekala2016-08-019-15/+18
* cad/openvsp: 3.7.2 -> 3.8.0Kurt Jaeger2016-07-313-3/+52
* - Change maintainer email [1]Pawel Pekala2016-07-281-4/+5
* - Update to 3.8.81Danilo Egea Gondolfo2016-07-252-6/+6
* - Update to 9.7.94Danilo Egea Gondolfo2016-07-242-3/+4
* - update libgd to 2.2.2Dirk Meyer2016-07-201-1/+1
* LinuxCNC controls CNC machines. It can drive milling machines,Edward Tomasz Napierala2016-07-1333-0/+3072
* Remove expired ports without open PRs:Rene Ladan2016-07-054-44/+0
* Update to 3.3.73Niclas Zeising2016-06-287-20/+27
* Update to upstream version 3.7.2Thomas Zander2016-06-262-7/+5
* Prefer relative links to make packages more relocation friendlyBaptiste Daroussin2016-06-234-9/+9
* cad/openvsp: 3.6.1 -> 3.6.2Kurt Jaeger2016-06-163-3/+6
* cad/kicad-devel: Fix faulty IGNORE message which falsely traps DFJohn Marino2016-06-151-0/+2
* - Take maintainership.Hiroki Sato2016-06-105-19/+36
* - Delete the usage of %%QT_BINDIR%% in pkg-plist (NB.: %%QT_BINDIR%% is still...Michael Reifenberger2016-06-094-508/+1626
* - Update to r6904,Michael Reifenberger2016-06-094-32/+75
* Remove unneeded usage of:Mathieu Arnold2016-06-061-2/+1
* cad/openvsp: 3.6.0 -> 3.6.1Kurt Jaeger2016-06-053-3/+4
* Deprecate ports broken for more than 6 monthsAntoine Brodin2016-06-041-0/+2
* Update to 10.1.1Niclas Zeising2016-05-282-4/+5
* cad/ghdl: build it with gcc6-aux, not gcc5-auxJohn Marino2016-05-271-1/+2
* Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by...Dmitry Marakasov2016-05-243-3/+3
* Convert tab after WWW: in pkg-descrs to single space as per PHBDmitry Marakasov2016-05-241-1/+1
* - Fix trailing whitespace in MakefilesDmitry Marakasov2016-05-191-1/+1
* - Fix trailing whitespace in pkg-descrs, categories [a-f]*Dmitry Marakasov2016-05-1919-60/+60
* Add cad/py-gdspy, Python module for creating GDSII stream files.Hiroki Sato2016-05-174-0/+38
* Fix dependency.Hiroki Sato2016-05-171-1/+1
* Update to 4.0.4.Hiroki Sato2016-05-175-20/+21
* Add cad/rubygem-gdsii, Ruby library for GDSII reader and writer.Hiroki Sato2016-05-1714-0/+235
* Add cad/py-lcapy, Symbolic MDA Analysis Package for Linear Circuits.Hiroki Sato2016-05-174-0/+47
* cad/openvsp: update 3.5.2 -> 3.6.0Jason Unovitch2016-05-1226-280/+6
* Cleanup github bits.Mathieu Arnold2016-05-122-3/+3
* - Update to 8.2.20160404Dmitry Marakasov2016-05-123-13/+23
* graphics/py-opengl{-accelerate}: 3.0.1 -> 3.1.0, change to PyPI namingKurt Jaeger2016-05-101-1/+2
* Change Ada Framework foundation from gcc5-aux to gcc6-auxJohn Marino2016-04-301-1/+1
* - Update to 0.24.6Nicola Vitale2016-04-263-4/+5
* cad/openvsp: Fix build on i386Kurt Jaeger2016-04-232-1/+10
* cad/openvsp: 2.3.0 -> 3.5.2Kurt Jaeger2016-04-2232-110/+360
* Support Tk in USES=tk:tea. Convert more ports + minor fixes and modernization.Pietro Cerutti2016-04-2115-26/+272
* Update to version 2.10Maho Nakata2016-04-187-54/+53
* Do not attempt to create ${STAGEDIR}${DESKTOPDIR}: `share/applications'Alexey Dokuchaev2016-04-161-1/+0
* Try to fix comilation under FreeBSD-9Michael Reifenberger2016-04-162-1/+9
* Update to r6680.Michael Reifenberger2016-04-115-39/+46
* - Add LICENSEDmitry Marakasov2016-04-105-19/+22
* Update to 5.2Guido Falsi2016-04-022-3/+3
* Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.Mathieu Arnold2016-04-0140-146/+146
* Make print/ghostscript9-agpl-base the default Ghostscript port. UpstreamTijl Coosemans2016-03-241-1/+1
* qt4-moc: Add more Boost include guards to moc's definition list.Raphael Kubo da Costa2016-03-242-28/+0
* Update to version 8.1-20160311.Thierry Thomas2016-03-189-40/+50
* Unbreak after the math/superlu update in r410620.Raphael Kubo da Costa2016-03-142-4/+4
* - Update to 2.12.0.Stephen Montgomery-Smith2016-03-103-4/+7
* Update to 2.5.110615.Mathieu Arnold2016-03-0920-285/+65
* Add patches to fix the build on FreeBSD 11 with libc++.Raphael Kubo da Costa2016-02-264-0/+72
* Update to 2.3.5.Vanilla I. Shu2016-02-204-11/+29
* cad/p5-Verilog-Perl: 3.404 -> 3.418Kurt Jaeger2016-02-116-43/+40
* Update to 10.1Niclas Zeising2016-02-092-3/+3
* - Fix build with boost 1.60Dmitry Marakasov2016-02-083-1/+29
* cad/ghdl: USES+= ncurses libedit, fix with ports ncursesJohn Marino2016-02-071-0/+2
* Update to 3.3.69Niclas Zeising2016-02-072-3/+3
* Remove empty pkg-plist.Edward Tomasz Napierala2016-02-021-1/+0
* Rename cad/pycam to cad/py-pycam, to match Python naming rules.Edward Tomasz Napierala2016-02-026-2/+3
* New port: cad/fritzingKurt Jaeger2016-02-018-0/+133
* Update to 3.3.68Niclas Zeising2016-01-312-4/+3
* brickM is a toolpath generator for 3-axis CNC machining. It loadsEdward Tomasz Napierala2016-01-306-0/+44
* Remove BROKEN_FreeBSD_8 from all remaining ports.Raphael Kubo da Costa2016-01-261-2/+0
* - Correct master_sites.Stephen Montgomery-Smith2016-01-201-1/+1
* - Update to 5.3.1.Stephen Montgomery-Smith2016-01-1812-55/+40
* - Update to 2.11.0.Stephen Montgomery-Smith2016-01-184-50/+6
* - Use modern OPTIONS framework.Stephen Montgomery-Smith2016-01-182-128/+59
* Update to version 3.12.5Michael Reifenberger2016-01-143-6/+889
* cad/iverilog is not jobs safeJohn Marino2016-01-131-0/+2
* Convert LICENSE= "GPLxx # or later" to "GPLxx+"Dmitry Marakasov2016-01-139-9/+9
* Update to 2.9 and unbreak.Maho Nakata2016-01-088-50/+338
* Add USES=pathfix support for CMake. Some ports that use CMake to buildJason E. Hale2016-01-071-2/+0
* Use LIB_DEPENDS for the quazip dependency.Michael Reifenberger2015-12-311-3/+3
* Try to resolve conflict with archivers/quazip by disabling the internal one f...Michael Reifenberger2015-12-303-12/+14
* Cleanup GH_* and variables order.Mathieu Arnold2015-12-291-1/+0
* - Unbreak: port fetches fineDmitry Marakasov2015-12-262-411/+7
* - Switch to options helpersDmitry Marakasov2015-12-251-18/+10
* - Switch to USES=localbaseDmitry Marakasov2015-12-251-5/+4
* - Switch to options helpersDmitry Marakasov2015-12-251-6/+6
* - Clarify LICENSEDmitry Marakasov2015-12-251-7/+9
* - Switch to options helpersDmitry Marakasov2015-12-251-0/+2
* cad/sweethome3d: update 5.0 -> 5.1Jason Unovitch2015-12-223-7/+6
* mark some of the ports that don't build on powerpc64 for meSteve Wills2015-12-141-0/+2
* Update PyQt4 to 4.11.4, SIP to 4.17 and QScintilla2 to 2.9.1.Raphael Kubo da Costa2015-12-131-1/+1
* Mark as broken: unfetchableBaptiste Daroussin2015-12-133-0/+6
* cad/ghdl: Upgrade version 0.32 => 0.33John Marino2015-12-074-39/+14
* - Chase library number changes from ports/r402502 applied to cad/vtk6.Stephen Montgomery-Smith2015-12-021-1/+6
* Try to fix compilation on FreeBSD-9 and HEAD.Michael Reifenberger2015-12-013-1/+14
* Remove expired ports:Rene Ladan2015-11-2955-3101/+0
* Update to 3.12.3Michael Reifenberger2015-11-295-179/+3352
* - Mark broken.Stephen Montgomery-Smith2015-11-271-0/+2
* Update to r6329.Michael Reifenberger2015-11-264-14/+174
* Update math/mpir to 2.7.2.Raphael Kubo da Costa2015-11-221-1/+1
* Simplify Makefile and use the right flags when building.Raphael Kubo da Costa2015-11-223-9/+33
* Upgrade to 6.9.1.Thierry Thomas2015-11-094-370/+1605
* cad/gspiceui: update 1.0.00 -> 1.1.00Bartek Rutkowski2015-11-085-34/+76
* Update to r6284.Michael Reifenberger2015-10-294-82/+38
* Deprecate ports broken for more than 6 monthsAntoine Brodin2015-10-2612-0/+24
* Don't depend on doxygen if DOCS are not enabled.Thierry Thomas2015-10-221-4/+3
* - Update to 9.7.93Danilo Egea Gondolfo2015-10-132-3/+3
* Fix build on FreeBSD 9.*Niclas Zeising2015-10-091-0/+7
* Remove trailing whitespace from Makefiles, A-L.Jimmy Olgeni2015-10-082-2/+2
* Update to 10.0Niclas Zeising2015-10-044-9/+27
* Typos, whitespace and capitalization fixes (A-F).Jimmy Olgeni2015-09-211-2/+2
* cad/meshdev: Support modern gcc by adding <cstring> headerJohn Marino2015-09-201-0/+10
* Update to r6201.Michael Reifenberger2015-09-173-247/+255
* Remove ansi version fo wxGTK 2.8 and only keep the unicode versionBaptiste Daroussin2015-09-172-2/+2
* Update the Qt4 ports to 4.8.7.Raphael Kubo da Costa2015-09-161-4/+4
* Make it so that the default Perl is always called perl5.Mathieu Arnold2015-09-141-4/+4
* - Switch to options helpersDmitry Marakasov2015-09-081-10/+5
* Update devel/tbb to 4.4.0 and bump dependent ports' revisionsGanael LAPLANCHE2015-09-031-1/+1
* - Add USES=desktop-file-utils shared-mime-info as suggested by stage-qaDmitry Marakasov2015-09-012-5/+12
* cad/librecad: add workaround to fix build with gccMax Brazhnikov2015-08-311-0/+3
* Drop USES=iconv.Raphael Kubo da Costa2015-08-311-2/+2
* - Bump PORTREVISION after libzip updateMax Brazhnikov2015-08-281-1/+1
* cad/librecad:Max Brazhnikov2015-08-283-3/+1295
* - Split ghostscript into X11-independent and -dependent parts:Hiroki Sato2015-08-231-1/+2
* - Fix build by fixing a typoDmitry Marakasov2015-08-221-1/+3
* - Fix build by using correct flags for crippled configureDmitry Marakasov2015-08-211-6/+6
* - Add NO_ARCHDmitry Marakasov2015-08-201-0/+1
* Fix previous commit.Mathieu Arnold2015-08-191-1/+0
* Convert ports to use the options helpers in categories [abc]*, and minor fixes.Mathieu Arnold2015-08-1920-166/+71
* Reset maintainerErwin Lansing2015-08-191-1/+1
* - Update to 5.0Jason Unovitch2015-08-062-4/+6
* cad/cura-engine: update 14.03 -> 15.04Bartek Rutkowski2015-08-053-6/+5
* Update to r6041.Michael Reifenberger2015-08-033-4/+8
* Part 1 of adding USE_GNOME=intltool to ports that require it.Koop Mast2015-08-032-1/+2
* - Fix shebangsDmitry Marakasov2015-07-301-2/+4
* Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.Koop Mast2015-07-171-2/+1
* Update to r5933.Michael Reifenberger2015-07-144-13/+88
* cad/tkgate: Unbreak FreeBSD 11, Fix depends on restJohn Marino2015-07-071-1/+2
* In April/May 2012, STEP Class Library was renamed to STEPcode. This was doneDmitry Marakasov2015-07-035-0/+165
* Add USES=alias to 11 ports (non-invasive DragonFly support)John Marino2015-07-031-1/+2
* Use BROKEN helpersBaptiste Daroussin2015-06-271-7/+3
* - Fix build by adding iconv dependencyVsevolod Stakhov2015-06-241-1/+1
* Restore removed cad/tkgate.Vsevolod Stakhov2015-06-246-0/+1468
* Convert to USES=jpegAntoine Brodin2015-06-234-9/+5
* cad/brickutils: drop dependency on py-xmlRuslan Makhmatkhanov2015-06-221-4/+4
* Remove all @dirrm/@dirrmtryBaptiste Daroussin2015-06-212-11/+4
* Remove build-plist target not needed anymore and still generating deprecatedBaptiste Daroussin2015-06-211-25/+2
* Remove plist generator (we now have make makeplist and make check-plist)Baptiste Daroussin2015-06-211-28/+0
* - Update to 9.06Danilo Egea Gondolfo2015-06-172-8/+7
* CLeanup USE_GITHUB usage.Mathieu Arnold2015-06-161-3/+2
* cad/ghdl: Upgrade to latest (several fixes including jobs safety for llvm)John Marino2015-06-163-17/+6
* - Disable precompiled headers to fix build with old gcc on -current kernelDmitry Marakasov2015-06-113-0/+15
* - Fix library installationDmitry Marakasov2015-06-111-1/+2
* cad/ghdl: Support DragonFly - llvm back now jobs safeJohn Marino2015-06-033-4/+18
* cad/ghdl: Fix missing makeinfo on -CURRENT (caught by pkg-fallout)John Marino2015-06-021-1/+1
* - Update math/cgal to 4.6Wen Heping2015-06-011-1/+1
* cad/ghdl: Add option to use experimental LLVM backendJohn Marino2015-06-013-19/+266
* Cleanup USE_GITHUB usage.Mathieu Arnold2015-05-312-3/+3
* Add new port: cad/ghdlJohn Marino2015-05-318-0/+710
* - Mark BROKEN on 8.x: absence of strtollDmitry Marakasov2015-05-281-1/+7
* - Update to 4.6Dmitry Marakasov2015-05-275-14/+14
* - Don't cat pkg-message from MakefilesDmitry Marakasov2015-05-271-1/+0
* - Don't install static libraries with INSTALL_LIBDmitry Marakasov2015-05-201-2/+2
* Replace most occurences of github.com in MASTER_SITES with USE_GITHUB usage.Mathieu Arnold2015-05-192-6/+4
* MASTER_SITES cleanup.Mathieu Arnold2015-05-149-18/+9
* Cleanup DIST* variables.Mathieu Arnold2015-05-124-7/+4
* Update ports in the [bcd]* categories to not use GH_COMMIT.Mathieu Arnold2015-05-068-16/+10
* - Update to 9.7.92Danilo Egea Gondolfo2015-05-032-3/+3
* - Chase GNU Emacs updatesAshish SHUKLA2015-04-272-2/+2
* Mark BROKEN of FreeBSD < 10:Thierry Thomas2015-04-251-0/+5
* - Fix plist: remove .desktop file which is handled by DESKTOP_ENTRIESDmitry Marakasov2015-04-231-1/+0
* - Update to 2.9.3.Stephen Montgomery-Smith2015-04-212-3/+3
* Update to r5612 and add a patch to avoid compiling error when using -std=c++1...Michael Reifenberger2015-04-204-4/+139
* Convert to USES=autoreconfTijl Coosemans2015-04-191-5/+1
* Unbreak after WX update by adding -std=c++11 to CXXFLAGS.Michael Reifenberger2015-04-131-1/+2
* cad/ldraw: Fix fetch; distfile was rerolledJohn Marino2015-04-122-5/+4
* cad/brickutils: unbreak fetch (relocated at sourceforge)John Marino2015-04-121-4/+2
* Unbroken by r383483 (this is just a slave port).Thierry Thomas2015-04-081-1/+0
* - Update to 2.9.2.Stephen Montgomery-Smith2015-04-072-4/+3
* Unbreak. The tarball had been rerolled again.Thierry Thomas2015-04-072-4/+3
* Mark as broken unfetchable portsBaptiste Daroussin2015-04-0617-0/+20
* Try to use a newer compiler.Michael Reifenberger2015-04-051-1/+2
* Update to r5542.Michael Reifenberger2015-03-273-3166/+3151
* Upgrade to version 2015.03Michael Reifenberger2015-03-273-37/+108
* 6 ports categories: Remove $PTHREAD_LIBSJohn Marino2015-03-253-4/+3
* Unreak.Bryan Drewery2015-03-231-11/+4
* Update USE_GITHUB so it does not require GH_COMMIT.Bryan Drewery2015-03-201-1/+1
* - Switch to linguisttools_buildDmitry Marakasov2015-03-161-1/+1
* Now we can choose between OpenBLAS and reference BLAS.Maho Nakata2015-03-141-7/+11
* - Update to 2.9.0.Stephen Montgomery-Smith2015-03-147-61/+28
* Update to 1.8Maho Nakata2015-03-117-351/+308
* - Update to 9.7.91Danilo Egea Gondolfo2015-03-072-3/+3
* - Add NO_ARCHDmitry Marakasov2015-03-052-0/+2
* Update to r5469.Michael Reifenberger2015-03-044-84/+190
* - Update to 9.7.90Danilo Egea Gondolfo2015-03-042-3/+3
* Remove Authors from pkg-descrBaptiste Daroussin2015-03-031-1/+0
* Fix DESKTOP_ENTRIES:Max Brazhnikov2015-02-281-1/+1
* cad/librecad:Max Brazhnikov2015-02-274-16/+11
* - Update to 9.7.89Danilo Egea Gondolfo2015-02-252-3/+3
* Try to fix build on FreeBSD 8.* and 9.*Michael Reifenberger2015-02-251-1/+2
* - Switch my ports to USE_QT4=linguisttools_build and adjust Qt componentsMax Brazhnikov2015-02-251-2/+3
* Update Code_Aster to 11.7.0-1, with its different tools.Thierry Thomas2015-02-192-2/+5
* - Fix device support. The previous version was totally broken.Hiroki Sato2015-02-153-4/+14
* - Update to 9.7.88Danilo Egea Gondolfo2015-02-122-4/+3
* Reverse the logic of architecture support.Sean Bruno2015-02-091-3/+2
* Remove GCC_DEFAULT.Thierry Thomas2015-02-091-2/+1
* Since Gcc is 4.8 by default, Kicad does not build anymore: e.g. seeThierry Thomas2015-02-081-3/+9
* - Update to 3.8.78Danilo Egea Gondolfo2015-02-032-3/+3
* Add datadir to search path.Michael Reifenberger2015-01-312-1/+14
* Upgrade to 0.54 ans respect options for docs and examples.Thierry Thomas2015-01-274-47/+66
* Upgrade to 1.3.3 and define LICENSE.Thierry Thomas2015-01-2611-94/+111
* Fix a typoAntoine Brodin2015-01-251-1/+1
* Switch some dependencies from a directory name or a file generated by pkg-ins...Antoine Brodin2015-01-245-5/+5
* Update to Release 3.7.5.0.Michael Reifenberger2015-01-204-825/+2444
* PORTDATA=* makes the same job as the custom auto plist used in this port andBaptiste Daroussin2015-01-181-5/+1
* Correct WWW URLMichael Reifenberger2015-01-171-2/+1
generated by cgit (git 2.34.1) at 2025-02-25 03:20:34 +0800