aboutsummaryrefslogtreecommitdiffstats
path: root/cad
Commit message (Expand)AuthorAgeFilesLines
* - Resurrect `cad/elmerfem' and update to version 8.4danfe2019-11-1111-0/+419
* - Chase r517198 and reconnect `cad/brlcad' to the builddanfe2019-11-101-0/+1
* - Resurrect BRLCAD, undeprecate, update to version 7.28.0danfe2019-11-106-0/+4146
* cad/librecad: fix build on GCC architecturespkubaj2019-11-092-1/+6
* Update Qt5 to 5.13.2tcberner2019-11-091-0/+3
* c*: Add missing USES={gnome,php,sdl,xorg}tobik2019-11-086-6/+7
* Unmark these ports broken on aarch64.linimon2019-11-081-2/+0
* Sprinkle more USES=xorgzeising2019-11-082-0/+2
* Mark a few ports BROKEN, unfetchableantoine2019-11-064-0/+8
* Add USES=xorg USES=gl, ports categories czeising2019-11-0521-22/+25
* cad/freecad: update to 0.18.4cmt2019-11-032-6/+5
* cad/ngspice_rework: update to 31cmt2019-11-012-5/+5
* cad/gtkwave: Update to 3.3.102zeising2019-11-012-5/+4
* cad/admesh: update to 0.98.4fernape2019-11-013-4/+22
* cad/openvsp: fix build on arm*pkubaj2019-10-282-2/+10
* cad/fasm: Make PKGBASE uniqueyuri2019-10-274-0/+35
* Remove port with duplicate PKGBASEantoine2019-10-274-34/+0
* New port: cad/fasm: FPGA assembly (FASM) parser and generatoryuri2019-10-274-0/+34
* cad/openscad: unbreak with boost 1.72jbeich2019-10-254-0/+10
* New port: cad/nvc: VHDL compiler and simulatoryuri2019-10-235-0/+125
* Re-add cad/ghdl: GNU VHDL simulatoryuri2019-10-239-0/+422
* cad/verilator: Update 4.008 -> 4.020yuri2019-10-203-12/+7
* Remove expired ports:rene2019-10-1616-1229/+0
* - Update LibreDWG to version 0.9danfe2019-10-073-7/+9
* cad/alliance: fix build on GCC architecturespkubaj2019-10-071-1/+2
* fix fallout after ports r513745 (opencascade)cmt2019-10-048-0/+686
* Upgrade to 7.4.0.thierry2019-10-044-427/+1217
* devel/pyside2 and friends: update to 5.13.1cmt2019-10-031-1/+1
* Drop build dependency on GNU m4.bapt2019-10-011-2/+1
* cad/alliance: Really remove libXp dependencyzeising2019-10-011-1/+1
* cad/alliance: remove dependency on libXpzeising2019-10-012-0/+16
* cad/alliance: Update to 5.1.1, remove BROKEN and undeprecatekai2019-09-2810-336/+47
* Update to 0.370mp2019-09-252-4/+4
* Update devel/tbb to 2019.8 and bump dependent ports' revisionsmartymac2019-09-251-1/+1
* Mark BROKEN with lldantoine2019-09-181-0/+4
* Mark BROKEN on i386 with lldantoine2019-09-181-0/+4
* Deprecate a few portsantoine2019-09-164-0/+8
* cad/k40-whisperer: Update to 0.360mp2019-09-102-13/+4
* - Update to 3.10.13danilo2019-09-094-23/+13
* Mark BROKENantoine2019-09-081-0/+2
* Update to 2019.09.05mr2019-09-063-6/+11
* cad/k40-whisperer: Update to 0.350mp2019-09-054-39/+40
* cad/leocad: Update 18.02.20190517 -> 19.07.1yuri2019-09-052-7/+5
* cad/ldraw: Update 20181208 -> 20190628yuri2019-09-052-8/+6
* cad/openvsp: update to 3.18.0fernape2019-09-052-6/+5
* cad/qelectrotech: Take on maintainership.arrowd2019-09-041-1/+1
* - Rebuild bootstrap (ppcx64 and ppc386) with ld patchesacm2019-09-031-1/+1
* Update cad/qelectrotech to latest upstream version.adridg2019-09-023-405/+3413
* devel/boost-*: update to 1.71.0jbeich2019-08-198-7/+8
* cat/iverilog: Update to 10.3zeising2019-08-182-5/+4
* - Bump PORTREVISION (lazarus ports were updated to 2.0.4)acm2019-08-161-1/+1
* Convert to UCL & cleanup pkg-message (categories a-c)mat2019-08-1412-21/+72
* Remove expired port:rene2019-08-1311-396/+0
* These ports now build on aarch64.linimon2019-08-111-2/+0
* cad/kicad and libraries: update to 5.1.4cmt2019-08-1116-55/+248
* - Add missing uses [1]vsevolod2019-08-091-2/+2
* - Update to 2.1vsevolod2019-08-086-91/+308
* multimedia/ffmpeg: update to 4.2jbeich2019-08-062-2/+2
* cad/lepton-eda: respect CFLAGSpkubaj2019-08-054-1/+34
* devel/double-conversion: Update 3.0.0 -> 3.1.5-11yuri2019-08-052-2/+2
* Mark BROKEN: unfetchableantoine2019-08-042-0/+4
* Mark BROKEN: unfetchableantoine2019-08-042-0/+3
* Bump PORTREVISION for ports depending on the canonical version of GCCgerald2019-07-2749-27/+49
* Update to current versionsmr2019-07-2415-43/+526
* cad/digital: Update 0.22 -> 0.22-250yuri2019-07-233-43/+8
* New port: cad/digital: Digital logic designer and circuit simulatoryuri2019-07-235-0/+129
* Update to 20190722052111mr2019-07-223-6/+6
* - Update WWWamdmi32019-07-211-1/+1
* cad/freecad: update to 0.18.3cmt2019-07-202-6/+7
* Mark BROKEN: unfetchableantoine2019-07-131-0/+2
* cad/openvsp: update to 3.17.1fernape2019-07-123-35/+4
* - Update LibreDWG to version 0.8danfe2019-07-112-5/+14
* cad/ldraw: Update 201501 -> 20181208yuri2019-07-055-82/+30
* Reset MAINTAINER of koalative@gmail.com's portstobik2019-07-052-2/+2
* - Restrict Python run-time dependency to version 2.7 becausedanfe2019-07-023-8/+132
* Update Guile to version 2.2.5, modern stable version, and fix dependentdanfe2019-06-271-8/+11
* - Update to 6.1.0 and fix some portswen2019-06-273-28/+875
* Fix build with bison 3.4.1sunpoet2019-06-271-0/+58
* cleanup.cmt2019-06-223-5755/+5753
* cad/kicad-doc: online help files and documentation for cad/kicadcmt2019-06-215-0/+5798
* - Fix the checks to avoid using `sys/dir.h' and thus undeprecatedanfe2019-06-193-5/+43
* cad/freecad: improve pyside2 detectioncmt2019-06-172-0/+32
* Incorporate a patch to stop using sys/dir.h which is deprecated in POSIX sincebapt2019-06-131-0/+40
* Mark as deprecated a bunch of abandonware using sys/dir.hbapt2019-06-121-0/+3
* Add missed patch-src_scripting_ecmaapi_ecmaapi.promr2019-06-031-0/+10
* Update to v3.22.0.12mr2019-06-0314-99/+83
* Update to 2019.05.26mr2019-05-272-5/+5
* archivers/quazip: update to 0.8tcberner2019-05-261-1/+1
* cad/gtkwave: Update to 3.3.101zeising2019-05-242-4/+4
* Update to 2019.05.10mr2019-05-232-6/+6
* cad/leocad: Fix commentyuri2019-05-181-1/+1
* Re-add cad/leocadyuri2019-05-186-0/+79
* - Fix mistake in r501675, where OSVERSION was tested in a place where itstephen2019-05-151-5/+7
* - Mark broken for recent versions of FreeBSD.stephen2019-05-151-0/+4
* Remove epxired ports:rene2019-05-1413-4465/+0
* cad/jspice3: Fix build with Clang 8tobik2019-05-121-0/+3
* update FreeCAD to 0.18.2cmt2019-05-122-5/+4
* These ports now build on aarch64.linimon2019-05-041-2/+0
* update KiCAD and it's libraries to 5.1.2cmt2019-05-0210-25/+25
* - Update to 4.3.0wen2019-04-293-7/+9
* Mark BROKEN on i386antoine2019-04-251-2/+3
* Related to revision 499061 bump ports with USES=fortran to have themgerald2019-04-228-5/+8
* update cad/kicad and libraries to 5.1.1cmt2019-04-2213-24/+308
* cad/calculix: Update to 2.15.pfg2019-04-207-58/+35
* cad/calculix-ccx: Update to version 2.15.pfg2019-04-186-33/+166
* cad/lepton-eda: fix build on 13.0-CURRENTpi2019-04-172-1/+20
* cad/freecad: update to 0.18.1cmt2019-04-132-5/+4
* devel/boost-*: update to 1.70.0jbeich2019-04-128-5/+8
* Bump a few PORTREVISIONs after r498529antoine2019-04-101-1/+1
* Update devel/readline to 8.0sunpoet2019-04-094-1/+4
* cad/solvespace: fix build with GCC-based architecturesswills2019-04-091-3/+4
* - Change MASTER_SITES to a web site I own. This is a stop-gap measure untilstephen2019-04-081-1/+2
* Deprecate ports broken for more than 6 monthsantoine2019-04-072-0/+4
* cad/openvsp: update to 3.17.0fernape2019-04-073-5/+35
* Update to latest version from 2019.04.04 and fix pkg-plist to fix build errors.mr2019-04-053-7/+9
* - Update `cad/zcad' to version 0.9.8.4; switch from usingdanfe2019-03-315-378/+182
* Remove duplicate line from plistantoine2019-03-291-1/+0
* Mark BROKEN: fails to buildantoine2019-03-281-0/+2
* Remove expired webkit-gtk2 and webkit-gtk3 ports.kwm2019-03-256-911/+0
* Resurrect cad/klayout and update to 0.25.8.hrs2019-03-1911-0/+346
* cat/zcad: remove qt4 flavor handlingtcberner2019-03-171-4/+0
* Qt4 deprecation: Remove Qt4 and its consumes.tcberner2019-03-1750-1715/+0
* archivers/quazip: remove flavors (Qt4 deprecation)tcberner2019-03-171-2/+2
* update freecad to 0.18cmt2019-03-1710-2194/+189
* Fix PKGNAME collisionantoine2019-03-161-1/+1
* Update to 4.2.0.hrs2019-03-166-174/+595
* Add cad/py-phidl, a GDS-based CAD tool for photonic and superconductinghrs2019-03-154-0/+38
* Update to 1.3.2.hrs2019-03-152-6/+6
* Upgrade cad/gmsh from 4.2.1 to 4.2.2rodrigo2019-03-152-4/+4
* Upgrade cad/gmsh from v4.1.3 to 4.2.1rodrigo2019-03-133-35/+40
* Fix build on gcc-based architectures:linimon2019-03-131-1/+1
* Fix build on gcc-based architectures:linimon2019-03-131-1/+1
* Fix build on gcc-based architectures:linimon2019-03-131-1/+1
* Upgrade to 5.1.0.thierry2019-03-1211-435/+1307
* - Upgrade to 5.1.0.thierry2019-03-123-11/+9
* Allow kicad-devel configure to find python 2.7 instead of 2.6mr2019-03-121-0/+22
* - Crashfix patch.stephen2019-03-119-10/+21
* Bump PORTREVISION seems to be neededmr2019-03-101-1/+1
* Use new python bindingmr2019-03-102-2/+4
* cad/openscad: Fix LIB_DEPENDS after r495203tobik2019-03-101-1/+1
* Update to the 2019.03.03 pre-release and switch to QT5 so that the port doesn...mr2019-03-104-100/+41
* Update ports up to 2019.03.08mr2019-03-0912-218/+389
* - Upgrade science/cgnslib to 3.4.0thierry2019-03-071-0/+1
* Update devel/doxygen to 1.8.15antoine2019-03-062-1/+43
* Mark webkit-gtk[23] ports as depricated with the same date as webkit-gtk[23].kwm2019-02-261-0/+3
* wxGTK3.0: switch to gtk3 and webkit2bapt2019-02-253-3/+3
* add localbase:ldflags to USEScmt2019-02-251-1/+1
* New port: cad/lepton-edatobik2019-02-2313-0/+2635
* - Correct web page.stephen2019-02-231-1/+1
* Fix RUN_DEPENDS. This is an obscure case: if you have kwrite installed,adridg2019-02-191-1/+1
* Fix build with DEFAULT_VERSIONS=python=3.xantoine2019-02-191-1/+1
* cad/gtkwave: update to 3.3.99zeising2019-02-182-4/+4
* Simplify C*FLAGS for i386mr2019-02-131-8/+4
* switch cad/freecad to Qt5 - this is the Makefile.cmt2019-02-101-18/+14
* switch cad/freecad to Qt5cmt2019-02-105-3/+39
* Update to 3.21.3.15 and try to fix build for i386mr2019-02-083-15335/+519
* Update the libraries to the latest snapshotsmr2019-02-0711-240/+874
* Update to 2019.02.06mr2019-02-072-5/+5
* Update to 2019.02.05mr2019-02-072-6/+6
* Deprecate ports broken for more than 6 monthsantoine2019-02-041-0/+2
* - Fix LICENSEamdmi32019-01-312-2/+4
* cad/verilator: remove unnecessary BUILD_DEPENDSswills2019-01-271-2/+1
* cad/verilator: update to 4.008swills2019-01-273-4/+23
* cad/gmsh: update to 4.1.3fernape2019-01-262-4/+4
* cad/gerbv: update to 2.7.0fernape2019-01-253-8/+61
* cad/gmsh: update to 4.1.0fernape2019-01-234-27/+11
* cad/opencascade: Do not set VIS_CMAKE_ON twicetobik2019-01-211-4/+2
* cad/verilator: create portswills2019-01-185-0/+97
* Fix Qt5 symbol version scripts to put the catch-all clause first. Whentijl2019-01-167-6/+7
* Use USE_GLtobik2019-01-151-2/+1
* Use USES=pkgconfig where appropriatetobik2019-01-131-2/+1
* cad/xtrkcad: CAD program for designing model railroad layoutspi2019-01-136-0/+909
* devel/cpptest: update to 2.0.0fernape2019-01-081-1/+1
* Update science/hdf5 to 1.10.4sunpoet2019-01-062-1/+2
* cad/ngspice_rework: Update to 30swills2019-01-053-10/+6
* cad/z88: update 13.0 -> 15pi2018-12-3120-254/+373
* cad/gtkwave: Update to 3.3.98zeising2018-12-273-6/+4
* This port requires USES=compiler:c++11-lang to build on GCC-basedlinimon2018-12-271-1/+1
* USES=compiler:c++11-lang is necessary to build on GCC-based architectures.linimon2018-12-261-1/+1
* Update math/eigen3 to 3.3.7tcberner2018-12-263-3/+3
* Change cmake default behaviour to outsource.tcberner2018-12-267-8/+7
* cad/gtkwave: Fix build on GCC-based architectureszeising2018-12-241-2/+2
* Mark BROKEN: fails to buildantoine2018-12-191-0/+2
* cad/gmsh: Update to version 4.0.7jrm2018-12-142-5/+4
* Bump PORTREVISION for ports depending on the canonical version of GCCgerald2018-12-1242-32/+42
* devel/boost-*: update to 1.69.0jbeich2018-12-128-5/+8
* Fix pkg-plistmr2018-12-111-1/+0
* Upgrade Kicad libraries to 5.0.2, in conjunction with KiCad 5.0.2.thierry2018-12-1011-129/+1306
* Update to 2018.12.07mr2018-12-0813-58/+1227
* Update to 3.21.3.11mr2018-12-083-202/+2881
* Use opt_USE instead of opt_VARS for USE_foo knobsunpoet2018-12-071-1/+1
* cad/gmsh: Remove redundant USE_LDCONFIG=yesjrm2018-12-071-1/+0
* Update to version 0.7, which is an important bugfix release.danfe2018-12-062-5/+4
* cad/gmsh: Update to 4.0.6jrm2018-12-063-11/+7
* Mark QT4 ports/functionality for removal on 2019-03-15rene2018-12-028-0/+24
* cad/gtkwave: Update to 3.3.97zeising2018-11-292-4/+4
* Upgrade to 5.0.2.thierry2018-11-292-4/+4
* pyqt: Change install directories for Python flavor supporttcberner2018-11-231-1/+1
* cad/gtkwave: Update to 3.3.96zeising2018-11-212-4/+4
* cad/openvsp: update to 3.16.2fernape2018-11-203-5/+6
* cad/openvsp: Unbreak portfernape2018-11-182-26/+4
* This port needs USES=compiler:c++11-lang to build on GCC-basedlinimon2018-11-111-1/+1
* Install texinfo files (GNU info) into ${PREFIX}/share/infobapt2018-11-115-5/+6
* - Update `cad/libredwg' to version 0.6.2 which brings numerous importantdanfe2018-11-082-5/+13
* multimedia/ffmpeg: update to 4.1jbeich2018-11-062-1/+2
* Mark BROKEN: fails to buildantoine2018-11-041-0/+1
* cad/gtkwave: Update to 3.3.95zeising2018-11-042-5/+6
* Remove compatibility code for FreeBSD < 11.2 from all ports.rene2018-11-024-13/+2
* cad/freecad: update to 0.17.13541jbeich2018-10-312-8/+10
* cad/freecad: unbreak with boost 1.69jbeich2018-10-312-1/+1980
* Upgrade to 7.3.0.thierry2018-10-319-141/+479
* Return subset of r483249 to GCC 4.2 to unbreak on mips*jbeich2018-10-281-1/+1
* Downgrade C++03 to C++98, actual default for GCC < 6jbeich2018-10-282-6/+3
* cad/gmsh: Remove CONFLICTS related to OCC knob and cad/gmsh-occjrm2018-10-281-2/+0
* cad/gmsh: Fix powerpc64 build [1] and restore DOCS knob [2]jrm2018-10-282-112/+183
* cad/gnucap: Update to 2013-04-23swills2018-10-274-44/+52
* - Update to 3.10.12danilo2018-10-273-5/+7
* Update kicad-*devel portsmr2018-10-2614-60/+312
* Update 2018.10.22:mr2018-10-265-53/+28
* Remove expired port:rene2018-10-255-7784/+0
* Expand FreeBSD 12 conditionals to include 13.0-CURRENTjbeich2018-10-241-0/+1
* cad/openscad: unbreak with boost 1.69jbeich2018-10-231-0/+13
* - Update WWWamdmi32018-10-191-1/+1
* Remove SUBDIR += gmsh from cad/Makefile (missing from last commit)jrm2018-10-181-1/+0
* Remove cad/gmsh-occ since cad/gmsh now builds with OCC by defaultjrm2018-10-183-31/+0
* cad/gmsh: Update to version 4.0.2 and reset maintainer to ports@jrm2018-10-184-293/+128
* - Add LICENSE_FILEamdmi32018-10-162-1/+2
* Update devel/tbb to version 2019.1 and bump dependent ports' revisionsmartymac2018-10-111-1/+1
* Upgrade to 5.0.1.thierry2018-10-1115-479/+813
* cad/calculix-ccx math/arpack++ math/armadillo math/scilab math/octave: Change...yuri2018-10-051-2/+2
* math/arpack-ng: Update 3.5.0 -> 3.6.3yuri2018-10-051-2/+2
* Update devel/tbb to version 2019 and bump dependent port's revisionsmartymac2018-10-041-1/+1
* Update 10.x build depend on clang to llvm60.brooks2018-09-261-3/+3
* Update Qt5 to 5.11.2tcberner2018-09-263-7/+21
* These ports now build on powerpc64.linimon2018-09-251-2/+0
* Repocopy the KiCad libraried from their -devel versions.thierry2018-09-2518-0/+19614
* Deprecate kicad-library: it must be replaced by Schematic symbols, PCBthierry2018-09-251-0/+3
* Upgrade to 5.0.0.thierry2018-09-2411-414/+195
* Change 10 ports from net/mpich2 to net/mpichyuri2018-09-231-3/+3
* Upgrade to 28, and use flavors to build the x11 application and the shared li...thierry2018-09-233-143/+151
* New port: cad/k40-whisperer0mp2018-09-207-0/+130
* More precisely specify USES=compiler to fix build on gcc-basedlinimon2018-09-181-5/+1
* Change x11/xorgproto to become a build depzeising2018-09-1211-11/+11
* Various cleanup & fixes post-DOCS/EXAMPLES cleanup.mat2018-09-101-5/+5
* Add EXAMPLES options to ports that should have one.mat2018-09-101-0/+2
* Add DOCS options to ports that should have one.mat2018-09-106-4/+7
* After an include, PLIST_SUB must be appended to, not overwritten.mat2018-09-101-2/+2
* Update science/hdf5 to 1.10.2sunpoet2018-09-062-2/+2
* Update devel/json-c to 0.13.1sunpoet2018-09-061-1/+1
* Fix build with Qt 5.11jhale2018-08-311-0/+41
generated by cgit (git 2.34.1) at 2024-11-16 01:51:51 +0800