| Commit message (Expand) | Author | Age | Files | Lines |
|---|
| * | update FreeCAD to 0.18.2 | cmt | 2019-05-12 | 2 | -5/+4 |
| * | These ports now build on aarch64. | linimon | 2019-05-04 | 1 | -2/+0 |
| * | update KiCAD and it's libraries to 5.1.2 | cmt | 2019-05-02 | 10 | -25/+25 |
| * | - Update to 4.3.0 | wen | 2019-04-29 | 3 | -7/+9 |
| * | Mark BROKEN on i386 | antoine | 2019-04-25 | 1 | -2/+3 |
| * | Related to revision 499061 bump ports with USES=fortran to have them | gerald | 2019-04-22 | 8 | -5/+8 |
| * | update cad/kicad and libraries to 5.1.1 | cmt | 2019-04-22 | 13 | -24/+308 |
| * | cad/calculix: Update to 2.15. | pfg | 2019-04-20 | 7 | -58/+35 |
| * | cad/calculix-ccx: Update to version 2.15. | pfg | 2019-04-18 | 6 | -33/+166 |
| * | cad/lepton-eda: fix build on 13.0-CURRENT | pi | 2019-04-17 | 2 | -1/+20 |
| * | cad/freecad: update to 0.18.1 | cmt | 2019-04-13 | 2 | -5/+4 |
| * | devel/boost-*: update to 1.70.0 | jbeich | 2019-04-12 | 8 | -5/+8 |
| * | Bump a few PORTREVISIONs after r498529 | antoine | 2019-04-10 | 1 | -1/+1 |
| * | Update devel/readline to 8.0 | sunpoet | 2019-04-09 | 4 | -1/+4 |
| * | cad/solvespace: fix build with GCC-based architectures | swills | 2019-04-09 | 1 | -3/+4 |
| * | - Change MASTER_SITES to a web site I own. This is a stop-gap measure until | stephen | 2019-04-08 | 1 | -1/+2 |
| * | Deprecate ports broken for more than 6 months | antoine | 2019-04-07 | 2 | -0/+4 |
| * | cad/openvsp: update to 3.17.0 | fernape | 2019-04-07 | 3 | -5/+35 |
| * | Update to latest version from 2019.04.04 and fix pkg-plist to fix build errors. | mr | 2019-04-05 | 3 | -7/+9 |
| * | - Update `cad/zcad' to version 0.9.8.4; switch from using | danfe | 2019-03-31 | 5 | -378/+182 |
| * | Remove duplicate line from plist | antoine | 2019-03-29 | 1 | -1/+0 |
| * | Mark BROKEN: fails to build | antoine | 2019-03-28 | 1 | -0/+2 |
| * | Remove expired webkit-gtk2 and webkit-gtk3 ports. | kwm | 2019-03-25 | 6 | -911/+0 |
| * | Resurrect cad/klayout and update to 0.25.8. | hrs | 2019-03-19 | 11 | -0/+346 |
| * | cat/zcad: remove qt4 flavor handling | tcberner | 2019-03-17 | 1 | -4/+0 |
| * | Qt4 deprecation: Remove Qt4 and its consumes. | tcberner | 2019-03-17 | 50 | -1715/+0 |
| * | archivers/quazip: remove flavors (Qt4 deprecation) | tcberner | 2019-03-17 | 1 | -2/+2 |
| * | update freecad to 0.18 | cmt | 2019-03-17 | 10 | -2194/+189 |
| * | Fix PKGNAME collision | antoine | 2019-03-16 | 1 | -1/+1 |
| * | Update to 4.2.0. | hrs | 2019-03-16 | 6 | -174/+595 |
| * | Add cad/py-phidl, a GDS-based CAD tool for photonic and superconducting | hrs | 2019-03-15 | 4 | -0/+38 |
| * | Update to 1.3.2. | hrs | 2019-03-15 | 2 | -6/+6 |
| * | Upgrade cad/gmsh from 4.2.1 to 4.2.2 | rodrigo | 2019-03-15 | 2 | -4/+4 |
| * | Upgrade cad/gmsh from v4.1.3 to 4.2.1 | rodrigo | 2019-03-13 | 3 | -35/+40 |
| * | Fix build on gcc-based architectures: | linimon | 2019-03-13 | 1 | -1/+1 |
| * | Fix build on gcc-based architectures: | linimon | 2019-03-13 | 1 | -1/+1 |
| * | Fix build on gcc-based architectures: | linimon | 2019-03-13 | 1 | -1/+1 |
| * | Upgrade to 5.1.0. | thierry | 2019-03-12 | 11 | -435/+1307 |
| * | - Upgrade to 5.1.0. | thierry | 2019-03-12 | 3 | -11/+9 |
| * | Allow kicad-devel configure to find python 2.7 instead of 2.6 | mr | 2019-03-12 | 1 | -0/+22 |
| * | - Crashfix patch. | stephen | 2019-03-11 | 9 | -10/+21 |
| * | Bump PORTREVISION seems to be needed | mr | 2019-03-10 | 1 | -1/+1 |
| * | Use new python binding | mr | 2019-03-10 | 2 | -2/+4 |
| * | cad/openscad: Fix LIB_DEPENDS after r495203 | tobik | 2019-03-10 | 1 | -1/+1 |
| * | Update to the 2019.03.03 pre-release and switch to QT5 so that the port doesn... | mr | 2019-03-10 | 4 | -100/+41 |
| * | Update ports up to 2019.03.08 | mr | 2019-03-09 | 12 | -218/+389 |
| * | - Upgrade science/cgnslib to 3.4.0 | thierry | 2019-03-07 | 1 | -0/+1 |
| * | Update devel/doxygen to 1.8.15 | antoine | 2019-03-06 | 2 | -1/+43 |
| * | Mark webkit-gtk[23] ports as depricated with the same date as webkit-gtk[23]. | kwm | 2019-02-26 | 1 | -0/+3 |
| * | wxGTK3.0: switch to gtk3 and webkit2 | bapt | 2019-02-25 | 3 | -3/+3 |
| * | add localbase:ldflags to USES | cmt | 2019-02-25 | 1 | -1/+1 |
| * | New port: cad/lepton-eda | tobik | 2019-02-23 | 13 | -0/+2635 |
| * | - Correct web page. | stephen | 2019-02-23 | 1 | -1/+1 |
| * | Fix RUN_DEPENDS. This is an obscure case: if you have kwrite installed, | adridg | 2019-02-19 | 1 | -1/+1 |
| * | Fix build with DEFAULT_VERSIONS=python=3.x | antoine | 2019-02-19 | 1 | -1/+1 |
| * | cad/gtkwave: update to 3.3.99 | zeising | 2019-02-18 | 2 | -4/+4 |
| * | Simplify C*FLAGS for i386 | mr | 2019-02-13 | 1 | -8/+4 |
| * | switch cad/freecad to Qt5 - this is the Makefile. | cmt | 2019-02-10 | 1 | -18/+14 |
| * | switch cad/freecad to Qt5 | cmt | 2019-02-10 | 5 | -3/+39 |
| * | Update to 3.21.3.15 and try to fix build for i386 | mr | 2019-02-08 | 3 | -15335/+519 |
| * | Update the libraries to the latest snapshots | mr | 2019-02-07 | 11 | -240/+874 |
| * | Update to 2019.02.06 | mr | 2019-02-07 | 2 | -5/+5 |
| * | Update to 2019.02.05 | mr | 2019-02-07 | 2 | -6/+6 |
| * | Deprecate ports broken for more than 6 months | antoine | 2019-02-04 | 1 | -0/+2 |
| * | - Fix LICENSE | amdmi3 | 2019-01-31 | 2 | -2/+4 |
| * | cad/verilator: remove unnecessary BUILD_DEPENDS | swills | 2019-01-27 | 1 | -2/+1 |
| * | cad/verilator: update to 4.008 | swills | 2019-01-27 | 3 | -4/+23 |
| * | cad/gmsh: update to 4.1.3 | fernape | 2019-01-26 | 2 | -4/+4 |
| * | cad/gerbv: update to 2.7.0 | fernape | 2019-01-25 | 3 | -8/+61 |
| * | cad/gmsh: update to 4.1.0 | fernape | 2019-01-23 | 4 | -27/+11 |
| * | cad/opencascade: Do not set VIS_CMAKE_ON twice | tobik | 2019-01-21 | 1 | -4/+2 |
| * | cad/verilator: create port | swills | 2019-01-18 | 5 | -0/+97 |
| * | Fix Qt5 symbol version scripts to put the catch-all clause first. When | tijl | 2019-01-16 | 7 | -6/+7 |
| * | Use USE_GL | tobik | 2019-01-15 | 1 | -2/+1 |
| * | Use USES=pkgconfig where appropriate | tobik | 2019-01-13 | 1 | -2/+1 |
| * | cad/xtrkcad: CAD program for designing model railroad layouts | pi | 2019-01-13 | 6 | -0/+909 |
| * | devel/cpptest: update to 2.0.0 | fernape | 2019-01-08 | 1 | -1/+1 |
| * | Update science/hdf5 to 1.10.4 | sunpoet | 2019-01-06 | 2 | -1/+2 |
| * | cad/ngspice_rework: Update to 30 | swills | 2019-01-05 | 3 | -10/+6 |
| * | cad/z88: update 13.0 -> 15 | pi | 2018-12-31 | 20 | -254/+373 |
| * | cad/gtkwave: Update to 3.3.98 | zeising | 2018-12-27 | 3 | -6/+4 |
| * | This port requires USES=compiler:c++11-lang to build on GCC-based | linimon | 2018-12-27 | 1 | -1/+1 |
| * | USES=compiler:c++11-lang is necessary to build on GCC-based architectures. | linimon | 2018-12-26 | 1 | -1/+1 |
| * | Update math/eigen3 to 3.3.7 | tcberner | 2018-12-26 | 3 | -3/+3 |
| * | Change cmake default behaviour to outsource. | tcberner | 2018-12-26 | 7 | -8/+7 |
| * | cad/gtkwave: Fix build on GCC-based architectures | zeising | 2018-12-24 | 1 | -2/+2 |
| * | Mark BROKEN: fails to build | antoine | 2018-12-19 | 1 | -0/+2 |
| * | cad/gmsh: Update to version 4.0.7 | jrm | 2018-12-14 | 2 | -5/+4 |
| * | Bump PORTREVISION for ports depending on the canonical version of GCC | gerald | 2018-12-12 | 42 | -32/+42 |
| * | devel/boost-*: update to 1.69.0 | jbeich | 2018-12-12 | 8 | -5/+8 |
| * | Fix pkg-plist | mr | 2018-12-11 | 1 | -1/+0 |
| * | Upgrade Kicad libraries to 5.0.2, in conjunction with KiCad 5.0.2. | thierry | 2018-12-10 | 11 | -129/+1306 |
| * | Update to 2018.12.07 | mr | 2018-12-08 | 13 | -58/+1227 |
| * | Update to 3.21.3.11 | mr | 2018-12-08 | 3 | -202/+2881 |
| * | Use opt_USE instead of opt_VARS for USE_foo knob | sunpoet | 2018-12-07 | 1 | -1/+1 |
| * | cad/gmsh: Remove redundant USE_LDCONFIG=yes | jrm | 2018-12-07 | 1 | -1/+0 |
| * | Update to version 0.7, which is an important bugfix release. | danfe | 2018-12-06 | 2 | -5/+4 |
| * | cad/gmsh: Update to 4.0.6 | jrm | 2018-12-06 | 3 | -11/+7 |
| * | Mark QT4 ports/functionality for removal on 2019-03-15 | rene | 2018-12-02 | 8 | -0/+24 |
| * | cad/gtkwave: Update to 3.3.97 | zeising | 2018-11-29 | 2 | -4/+4 |
| * | Upgrade to 5.0.2. | thierry | 2018-11-29 | 2 | -4/+4 |
| * | pyqt: Change install directories for Python flavor support | tcberner | 2018-11-23 | 1 | -1/+1 |
| * | cad/gtkwave: Update to 3.3.96 | zeising | 2018-11-21 | 2 | -4/+4 |
| * | cad/openvsp: update to 3.16.2 | fernape | 2018-11-20 | 3 | -5/+6 |
| * | cad/openvsp: Unbreak port | fernape | 2018-11-18 | 2 | -26/+4 |
| * | This port needs USES=compiler:c++11-lang to build on GCC-based | linimon | 2018-11-11 | 1 | -1/+1 |
| * | Install texinfo files (GNU info) into ${PREFIX}/share/info | bapt | 2018-11-11 | 5 | -5/+6 |
| * | - Update `cad/libredwg' to version 0.6.2 which brings numerous important | danfe | 2018-11-08 | 2 | -5/+13 |
| * | multimedia/ffmpeg: update to 4.1 | jbeich | 2018-11-06 | 2 | -1/+2 |
| * | Mark BROKEN: fails to build | antoine | 2018-11-04 | 1 | -0/+1 |
| * | cad/gtkwave: Update to 3.3.95 | zeising | 2018-11-04 | 2 | -5/+6 |
| * | Remove compatibility code for FreeBSD < 11.2 from all ports. | rene | 2018-11-02 | 4 | -13/+2 |
| * | cad/freecad: update to 0.17.13541 | jbeich | 2018-10-31 | 2 | -8/+10 |
| * | cad/freecad: unbreak with boost 1.69 | jbeich | 2018-10-31 | 2 | -1/+1980 |
| * | Upgrade to 7.3.0. | thierry | 2018-10-31 | 9 | -141/+479 |
| * | Return subset of r483249 to GCC 4.2 to unbreak on mips* | jbeich | 2018-10-28 | 1 | -1/+1 |
| * | Downgrade C++03 to C++98, actual default for GCC < 6 | jbeich | 2018-10-28 | 2 | -6/+3 |
| * | cad/gmsh: Remove CONFLICTS related to OCC knob and cad/gmsh-occ | jrm | 2018-10-28 | 1 | -2/+0 |
| * | cad/gmsh: Fix powerpc64 build [1] and restore DOCS knob [2] | jrm | 2018-10-28 | 2 | -112/+183 |
| * | cad/gnucap: Update to 2013-04-23 | swills | 2018-10-27 | 4 | -44/+52 |
| * | - Update to 3.10.12 | danilo | 2018-10-27 | 3 | -5/+7 |
| * | Update kicad-*devel ports | mr | 2018-10-26 | 14 | -60/+312 |
| * | Update 2018.10.22: | mr | 2018-10-26 | 5 | -53/+28 |
| * | Remove expired port: | rene | 2018-10-25 | 5 | -7784/+0 |
| * | Expand FreeBSD 12 conditionals to include 13.0-CURRENT | jbeich | 2018-10-24 | 1 | -0/+1 |
| * | cad/openscad: unbreak with boost 1.69 | jbeich | 2018-10-23 | 1 | -0/+13 |
| * | - Update WWW | amdmi3 | 2018-10-19 | 1 | -1/+1 |
| * | Remove SUBDIR += gmsh from cad/Makefile (missing from last commit) | jrm | 2018-10-18 | 1 | -1/+0 |
| * | Remove cad/gmsh-occ since cad/gmsh now builds with OCC by default | jrm | 2018-10-18 | 3 | -31/+0 |
| * | cad/gmsh: Update to version 4.0.2 and reset maintainer to ports@ | jrm | 2018-10-18 | 4 | -293/+128 |
| * | - Add LICENSE_FILE | amdmi3 | 2018-10-16 | 2 | -1/+2 |
| * | Update devel/tbb to version 2019.1 and bump dependent ports' revisions | martymac | 2018-10-11 | 1 | -1/+1 |
| * | Upgrade to 5.0.1. | thierry | 2018-10-11 | 15 | -479/+813 |
| * | cad/calculix-ccx math/arpack++ math/armadillo math/scilab math/octave: Change... | yuri | 2018-10-05 | 1 | -2/+2 |
| * | math/arpack-ng: Update 3.5.0 -> 3.6.3 | yuri | 2018-10-05 | 1 | -2/+2 |
| * | Update devel/tbb to version 2019 and bump dependent port's revisions | martymac | 2018-10-04 | 1 | -1/+1 |
| * | Update 10.x build depend on clang to llvm60. | brooks | 2018-09-26 | 1 | -3/+3 |
| * | Update Qt5 to 5.11.2 | tcberner | 2018-09-26 | 3 | -7/+21 |
| * | These ports now build on powerpc64. | linimon | 2018-09-25 | 1 | -2/+0 |
| * | Repocopy the KiCad libraried from their -devel versions. | thierry | 2018-09-25 | 18 | -0/+19614 |
| * | Deprecate kicad-library: it must be replaced by Schematic symbols, PCB | thierry | 2018-09-25 | 1 | -0/+3 |
| * | Upgrade to 5.0.0. | thierry | 2018-09-24 | 11 | -414/+195 |
| * | Change 10 ports from net/mpich2 to net/mpich | yuri | 2018-09-23 | 1 | -3/+3 |
| * | Upgrade to 28, and use flavors to build the x11 application and the shared li... | thierry | 2018-09-23 | 3 | -143/+151 |
| * | New port: cad/k40-whisperer | 0mp | 2018-09-20 | 7 | -0/+130 |
| * | More precisely specify USES=compiler to fix build on gcc-based | linimon | 2018-09-18 | 1 | -5/+1 |
| * | Change x11/xorgproto to become a build dep | zeising | 2018-09-12 | 11 | -11/+11 |
| * | Various cleanup & fixes post-DOCS/EXAMPLES cleanup. | mat | 2018-09-10 | 1 | -5/+5 |
| * | Add EXAMPLES options to ports that should have one. | mat | 2018-09-10 | 1 | -0/+2 |
| * | Add DOCS options to ports that should have one. | mat | 2018-09-10 | 6 | -4/+7 |
| * | After an include, PLIST_SUB must be appended to, not overwritten. | mat | 2018-09-10 | 1 | -2/+2 |
| * | Update science/hdf5 to 1.10.2 | sunpoet | 2018-09-06 | 2 | -2/+2 |
| * | Update devel/json-c to 0.13.1 | sunpoet | 2018-09-06 | 1 | -1/+1 |
| * | Fix build with Qt 5.11 | jhale | 2018-08-31 | 1 | -0/+41 |
| * | GNU LibreDWG is a C library to handle DWG files which aims to be a free | danfe | 2018-08-30 | 5 | -0/+70 |
| * | cad/qmls: Fix build with Clang 6 | tobik | 2018-08-25 | 1 | -0/+36 |
| * | cad/leocad: Remove the embedded build date and fix build with Clang 6 | tobik | 2018-08-25 | 2 | -1/+17 |
| * | cad/openvsp: update to 3.16.1 | fernape | 2018-08-24 | 2 | -5/+4 |
| * | Update the KiCAD devel ports to the latest versions | mr | 2018-08-22 | 13 | -479/+674 |
| * | cad/meshlab: drop maintainership per request. | rene | 2018-08-21 | 1 | -1/+1 |
| * | Upgrade Code_Aster to 13.6.0-1. | thierry | 2018-08-18 | 1 | -6/+1 |
| * | Simplify MASTER_SITES | sunpoet | 2018-08-16 | 1 | -1/+1 |
| * | devel/boost-*: update to 1.68.0 | jbeich | 2018-08-09 | 8 | -8/+8 |
| * | cad/gtkwave: update to 3.3.93 | zeising | 2018-08-04 | 3 | -4/+6 |
| * | Fix a common grammar error: "can not" means the opposite of "cannot." | adamw | 2018-08-02 | 1 | -2/+2 |
| * | Switch to xorgproto instead of individual packages | zeising | 2018-08-01 | 1 | -3/+3 |
| * | Mark broken on FreeBSD 10. | trasz | 2018-07-30 | 1 | -5/+2 |
| * | Bump PORTREVISION for ports depending on the canonical version of GCC | gerald | 2018-07-30 | 26 | -20/+26 |
| * | Add a port of the KiCAD Project Templates | mr | 2018-07-28 | 7 | -0/+286 |
| * | cad/gtkwave: Update to 3.3.92 | zeising | 2018-07-27 | 2 | -4/+4 |
| * | Unbreak. | trasz | 2018-07-24 | 3 | -20/+38 |
| * | Mark BROKEN: checksum and size mismatch | antoine | 2018-07-22 | 1 | -0/+1 |
| * | cad/calculix: update to version 2.14 | swills | 2018-07-19 | 7 | -44/+34 |
| * | Deprecate ports broken for more than 5 months | antoine | 2018-07-17 | 1 | -0/+2 |
| * | cad/admesh: Update 0.95 -> 0.98.3 | yuri | 2018-07-15 | 3 | -27/+20 |
| * | Update to upstream version 2.14 | riggs | 2018-07-10 | 5 | -42/+176 |
| * | cad/kicad-devel: flatten GitHub link | jbeich | 2018-07-10 | 1 | -1/+1 |
| * | Really bunp PORTREVISION this time... | mr | 2018-07-09 | 1 | -1/+1 |
| * | cad/kicad-devel: unbreak with boost 1.68 | jbeich | 2018-07-09 | 1 | -0/+21 |
| * | Bump PORTREVISION to fix pkg building. | mr | 2018-07-09 | 1 | -1/+0 |
| * | Remove all := from BUILD_DEPENDS, here are never needed. | mat | 2018-07-09 | 1 | -1/+1 |
| * | Add two missing patches. | mr | 2018-07-08 | 2 | -0/+30 |
| * | Mark these ports as broken on aarch64, and, where appropriate, armvX. | linimon | 2018-07-07 | 1 | -0/+1 |
| * | Fix PKGNAMEs | antoine | 2018-07-07 | 3 | -3/+3 |
| * | Complete the switch to qt5 and upgrade to 3.21.1.1 | mr | 2018-07-06 | 10 | -187/+320 |
| * | Follow upstream and split the kicad-library-devel port into | mr | 2018-07-06 | 24 | -8608/+19397 |
| * | Update to r20180703172316. | mr | 2018-07-05 | 3 | -29/+35 |
| * | Mark ports broken on mips64 that are already broken on powerpc64. In | linimon | 2018-07-02 | 2 | -0/+4 |
| * | Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk | tcberner | 2018-06-29 | 13 | -26/+26 |
| * | Simplify EXTRACT_ONLY | rene | 2018-06-26 | 1 | -1/+1 |
| * | - Unbreak build on ARM. Use malloc instead of sbrk. | danilo | 2018-06-26 | 2 | -2/+12 |
| * | cad/feappv: fix, update to version 4.1i and update WWW | rene | 2018-06-26 | 4 | -37/+21 |
| * | Update to version 3.20.1.7 and use QT5 due to compile errors when using QT4. | mr | 2018-06-22 | 3 | -24/+1932 |
| * | - Update to 3.10.10 | danilo | 2018-06-22 | 2 | -4/+4 |
| * | Use PY_FLAVOR for dependencies. | mat | 2018-06-21 | 6 | -13/+13 |
| * | Use EMACS_FLAVOR for dependencies. | mat | 2018-06-21 | 1 | -1/+1 |
| * | Mark ports broken on powerpc64, categories a-c. | linimon | 2018-06-18 | 4 | -6/+13 |
| * | Update automake to 1.16.1. Also remove automake-wrapper. We haven't had | tijl | 2018-06-14 | 2 | -4/+29 |
| * | Remove expired ports: | rene | 2018-06-07 | 48 | -1284/+0 |
| * | Mark as broken on powerpc64. | linimon | 2018-06-05 | 1 | -0/+2 |
| * | cad/gtkwave: Update to 3.3.91 | zeising | 2018-06-04 | 2 | -4/+4 |
| * | Unbreak qfsm build with clang 6.0 by fixing two instances of: | truckman | 2018-06-04 | 2 | -1/+21 |
| * | - Bump PORTREVISION (editors/lazarus was updated) | acm | 2018-06-03 | 1 | -1/+1 |
| * | cad/gtkwave: update to 3.3.90 | zeising | 2018-06-02 | 2 | -4/+4 |
| * | USES=emacs ports: Bump PORTREVISION for editors/emacs 26.1 upgrade | jrm | 2018-05-31 | 2 | -2/+2 |
| * | Update WWW | sunpoet | 2018-05-28 | 1 | -1/+1 |
| * | kicad-* are not compatible with python3 | antoine | 2018-05-27 | 2 | -2/+2 |
| * | - Moved ports to Uses/lazarus.mk | acm | 2018-05-26 | 2 | -25/+28 |
| * | Add PY_FLAVOR to Python module dependencies. | mat | 2018-05-22 | 1 | -1/+1 |
| * | Pass maintainership to submitter | joneum | 2018-05-19 | 1 | -1/+1 |
| * | - Whitespace fix | amdmi3 | 2018-05-12 | 1 | -5/+5 |
| * | Drop FreeBSD 10.3 support | jbeich | 2018-05-08 | 2 | -11/+0 |
| * | For ports under `cad', `devel', `dns`, and `math' categories: remove | danfe | 2018-05-05 | 3 | -3/+0 |
| * | Deprecate ports broken for more than 6 months | antoine | 2018-05-05 | 3 | -0/+6 |
| * | - Update to 3.10.9 | danilo | 2018-05-03 | 2 | -4/+4 |
| * | multimedia/ffmpeg: update to 4.0 | jbeich | 2018-05-02 | 2 | -2/+2 |
| * | multimedia/webcamoid: unbreak with ffmpeg 4.0 | jbeich | 2018-05-02 | 1 | -2/+4 |
| * | cad/opencascade: unbreak with ffmpeg 4.0 | jbeich | 2018-05-02 | 1 | -0/+34 |
| * | Update the QScintilla2 ports to 2.10.4 | tcberner | 2018-04-30 | 2 | -2/+2 |
| * | Reenable for FreeBSD >= 10.4 | mr | 2018-04-28 | 2 | -8/+7 |
| * | Enable experimental features. | mr | 2018-04-26 | 3 | -15/+21 |
| * | New port: cad/abc: System for sequential synthesis and verification | yuri | 2018-04-24 | 6 | -0/+101 |
| * | Add openscad-devel to the build and register conflict. | mr | 2018-04-23 | 2 | -0/+9 |
| * | Add openscad-devel as of 2018.04.19 | mr | 2018-04-23 | 6 | -0/+202 |
| * | Add missing distinfo changes | mr | 2018-04-22 | 1 | -3/+3 |
| * | Update to r20180420191845 | mr | 2018-04-22 | 2 | -5/+5 |
| * | - Update to 0.17.13509 | wen | 2018-04-22 | 4 | -149/+222 |
| * | Update mpfr to 4.0.1 release and bump PORTVERSION of dependent ports. | ale | 2018-04-19 | 2 | -2/+2 |
| * | devel/boost-*: update to 1.67.0 | jbeich | 2018-04-18 | 7 | -5/+7 |
| * | cad/freecad: unbreak with boost 1.67 | jbeich | 2018-04-17 | 1 | -0/+16 |
| * | Update to r20180415140733. | mr | 2018-04-16 | 2 | -5/+5 |
| * | Mark BROKEN when OSVERSION < 1003506, due to __cxa_atexit(). | thierry | 2018-04-08 | 1 | -0/+5 |
| * | - Migrate Mk/bsd.fpc.mk to Mk/Uses/fpc.mk | acm | 2018-04-05 | 1 | -1/+1 |
| * | Fix build of cad/elmerfem ahead of CMake 3.11. | adridg | 2018-04-03 | 3 | -8/+7 |
| * | - Update to 2.2.0-rc1 [1] | jhale | 2018-04-02 | 3 | -16/+14 |
| * | Fix build with clang 6.x, pet portlint | riggs | 2018-04-01 | 2 | -2/+22 |
| * | Update cad/openvsp to 3.16.0 | fernape | 2018-03-27 | 3 | -8/+19 |
| * | The sixth parameter of DESKTOP_ENTRIES is either true, false or empty, | mat | 2018-03-26 | 1 | -1/+1 |
| * | Update to r20180326082409. | mr | 2018-03-26 | 3 | -6/+6 |
| * | Update to r20180325183419 | mr | 2018-03-26 | 4 | -6/+7 |
| * | Update cad/gtkwave to 3.3.89 | zeising | 2018-03-24 | 2 | -4/+4 |
| * | Update to 3.3.88 | zeising | 2018-03-24 | 4 | -16/+20 |
| * | Fix cad/kicad{-devel} in advance of CMake 3.11. Remove old duplicate CMake | adridg | 2018-03-22 | 2 | -2/+14 |
| * | Pet portlint for cad/openvsp | fernape | 2018-03-19 | 1 | -5/+5 |
| * | Remove Ego-Lines from fernape's ports | fernape | 2018-03-14 | 2 | -2/+0 |
| * | Update MAINTAINER to new FreeBSD.org account | fernape | 2018-03-13 | 2 | -2/+2 |
| * | Convert archivers/quazip and archivers/quazip-qt5 into flavors | tcberner | 2018-03-11 | 1 | -1/+2 |
| * | Bump PORTREVISIONs of all users of math/mpc that we just updated to | gerald | 2018-03-11 | 22 | -13/+22 |
| * | Add more information to stub error messages. | linimon | 2018-03-10 | 1 | -2/+2 |
| * | Fix cad/openscad shebang | tcberner | 2018-03-10 | 1 | -2/+3 |
