aboutsummaryrefslogtreecommitdiffstats
path: root/cad
Commit message (Expand)AuthorAgeFilesLines
* Update to 20210215215911Michael Reifenberger2021-02-183-5/+7
* - Fix build with after devel/cereal updateDmitry Marakasov2021-02-184-5/+29
* cad/horizon-eda: Fix build with clang-11Yuri Victorovich2021-02-161-1/+7
* cad/geda: Update BUILD_DEPENDS to guile1 after upgrading guile to 3.XMuhammad Moinur Rahman2021-02-161-2/+2
* cad/digital: Update 0.25 -> 0.26Yuri Victorovich2021-02-152-6/+6
* cad/magic: Update 7.5.240 -> 8.3.125Yuri Victorovich2021-02-148-82/+94
* cad/stm32flash: Update 0.5 -> 0.6Yuri Victorovich2021-02-142-5/+5
* graphics/openexr, ilmbase: security update to v2.5.5Matthias Andree2021-02-131-0/+1
* cad/veroroute: Update 2.01 -> 2.04Yuri Victorovich2021-02-132-4/+4
* cad/netgen-lvs: Update 1.5.165 -> 1.5.166Yuri Victorovich2021-02-132-4/+4
* cad/py-ezdxf: Update to 0.15.2Loïc Bartoletti2021-02-132-6/+4
* Update openscad to 2021.01 and openscad-devel to the latest commitMichael Reifenberger2021-02-106-29/+32
* cad/ghdl: Update 0.37 -> 1.0.0Yuri Victorovich2021-02-045-116/+61
* cad/qrouter: Make the configure to pick up Tck/Tk.Yuri Victorovich2021-02-032-11/+15
* cad/graywolf: Backport PR that makes graywolf run through testsYuri Victorovich2021-02-032-3/+22
* - Update LibreDWG to version 0.12.1 (mostly bugfix release)Alexey Dokuchaev2021-02-023-5/+6
* Fix building when installed.Thierry Thomas2021-02-023-5/+15
* Update to the latest version.Michael Reifenberger2021-01-313-16/+14
* cad/horizon-eda: Update 1.3.0 -> 1.4.0Yuri Victorovich2021-01-313-18/+8
* Bump PORTREVISION for devel/protobuf shlib changeSunpoet Po-Chuan Hsieh2021-01-261-0/+1
* Fix build with bison 3.7.4Sunpoet Po-Chuan Hsieh2021-01-261-10/+2
* cad/netgen-lvs: Update 1.5.162 -> 1.5.165Yuri Victorovich2021-01-242-4/+4
* cad/veroroute: Update 2.00 -> 2.01Yuri Victorovich2021-01-242-4/+4
* - Update to 6.2.2101.Stephen Montgomery-Smith2021-01-233-5/+9
* cad/graywolf: Update 0.1.6-3 -> 0.1.6-4Yuri Victorovich2021-01-232-9/+15
* cad/librecad: Update to 2.2.0-rc2Jason E. Hale2021-01-196-73/+6
* I inadvertantly deleted a line while merging in patches. *sigh*Diane Bruce2021-01-191-1/+5
* Update qscintilla2 to 2.11.6Loïc Bartoletti2021-01-192-2/+2
* Finally update cura now that all prequisite ports are updated.Diane Bruce2021-01-174-182/+174
* - Update to 2.3.0 [1]Dmitry Marakasov2021-01-157-352/+119
* - lang/fpc revert way like linker is taken by fpc compilerJose Alonso Cardenas Marquez2021-01-151-0/+1
* - Remove forgotten patch file oin my previous commitJose Alonso Cardenas Marquez2021-01-152-13/+0
* Update GCC_DEFAULT from 9 to 10.Mark Linimon2021-01-141-0/+5
* cad/verilator: Update 4.106 -> 4.108Yuri Victorovich2021-01-132-4/+4
* kicad: clean up Makefile - that file has been gone for quite some timeChristoph Moench-Tegeder2021-01-131-6/+0
* - Update LibreDWG to version 0.12Alexey Dokuchaev2021-01-134-7/+54
* cad/netgen-lvs: Update 1.5.161 -> 1.5.162Yuri Victorovich2021-01-102-4/+4
* Follow up on graphics/py-pillow6 port removal in r559976Rene Ladan2021-01-061-1/+1
* graphics/openexr: graphics/ilmbase: v2.5.4 updateMatthias Andree2021-01-031-1/+1
* cad/netgen-lvs: Update 1.5.160 -> 1.5.161Yuri Victorovich2021-01-022-4/+4
* For ports on riscv64 that fail the same (or similar ways) to aarch64, markMark Linimon2021-01-021-1/+2
* Mark ports that are BROKEN due to sbrk on aarch64, also BROKEN on riscv64Mark Linimon2021-01-021-2/+3
* Fix pkg-plistMichael Reifenberger2020-12-292-85/+67
* cad/openfpgaloader: fix build on GCC architecturesPiotr Kubaj2020-12-294-5/+31
* Drop python 2.7 support from a few portsAntoine Brodin2020-12-293-3/+3
* update KiCad to 5.1.9Christoph Moench-Tegeder2020-12-2812-25/+24
* the port uses USE_GITHUB=yes, yet the commit did not change GH_TAGNAME.Diane Bruce2020-12-283-6/+411
* Switch the *library* ports to gitlab.Michael Reifenberger2020-12-2821-12831/+12661
* Mark BROKENAntoine Brodin2020-12-251-0/+2
* cad/qflow: Update 1.4.89 -> 1.4.90Yuri Victorovich2020-12-252-4/+4
* Relax hardcoded paths to fix build with Python 3.8.7Kai Knoblich2020-12-241-1/+1
* cad/lepton-eda: Update to 1.9.13Fernando Apesteguía2020-12-234-143/+216
* cad/openfpgaloader: Update 0.2 -> 0.2.1Yuri Victorovich2020-12-202-4/+4
* cad/netgen-lvs: Update 1.5.159 -> 1.5.160Yuri Victorovich2020-12-202-4/+4
* Update PyQt5 to 5.15.2, sip to 5.5.0, py-qtbuilder to 1.6.0 and py-qt5-sip to...Loïc Bartoletti2020-12-164-2/+4
* cad/openfpgaloader: Update 0.1 -> 0.2Yuri Victorovich2020-12-153-20/+10
* - Update to 0.9.8.5Jose Alonso Cardenas Marquez2020-12-155-42/+39
* try to make FreeCAD compile with Python 3.9Christoph Moench-Tegeder2020-12-143-2/+188
* cad/kicad-devel: unbreak with GCCPiotr Kubaj2020-12-131-7/+1
* - Upgrade math/eigen3 to 3.3.8;Thierry Thomas2020-12-136-4/+6
* New port: cad/archimedes: Semiconductor device simulation softwareYuri Victorovich2020-12-105-0/+43
* - Allow build for i386, because pkg-fallout@ reports build errors for amd64Stephen Montgomery-Smith2020-12-101-3/+2
* Modify cad/scotch to support int64.Thierry Thomas2020-12-103-3/+3
* - Build shared libraries also for 32 bits archs (missing in r557366).Thierry Thomas2020-12-092-0/+33
* Modify cad/scotch to install shared libraries.Thierry Thomas2020-12-093-50/+87
* Update Qt/PySide2 to 5.15.2 / PyQt to 5.15.1 / SIP to 5.4.0Loïc Bartoletti2020-12-092-7/+6
* cad/verilator: Update 4.104 -> 4.106Yuri Victorovich2020-12-072-4/+4
* cad/netgen-lvs: Update 1.5.158 -> 1.5.159Yuri Victorovich2020-12-072-4/+4
* cad/netgen-lvs: Update 1.5.157 -> 1.5.158Yuri Victorovich2020-12-062-4/+4
* cad/qflow: Update 1.4.87 -> 1.4.89Yuri Victorovich2020-12-042-5/+4
* Fix previous commit.Thierry Thomas2020-12-011-1/+1
* Unhardcode mesa-libs dependency, use USES=gl:glesv2 instead.Thierry Thomas2020-12-011-1/+1
* Update to version 0.11.1, which brings ``out_dxf'' bugfixes mostly.Alexey Dokuchaev2020-11-302-4/+5
* update freecad to 0.18.5Christoph Moench-Tegeder2020-11-285-203/+4
* Update to 0.55Mateusz Piotrowski2020-11-272-4/+4
* Upgrade Code_Aster to 14.6.0-1.Thierry Thomas2020-11-271-12/+13
* Update to 3.25.2.4Michael Reifenberger2020-11-223-4/+15
* Update to 4.8Diane Bruce2020-11-212-4/+4
* - Don't build for i386, because pkg-fallout@ reports build errors.Stephen Montgomery-Smith2020-11-211-2/+3
* Update to 4.8Diane Bruce2020-11-212-4/+4
* From PR:Diane Bruce2020-11-212-4/+4
* Add education virtual categoryAdam Weinberger2020-11-203-3/+3
* New port: cad/stm32flash: Flash program for STM32 using the ST serial bootloaderYuri Victorovich2020-11-184-0/+30
* graphics/proj: Update to 7.2.0Loïc Bartoletti2020-11-181-1/+1
* cad/ktechlab: fix build on GCC architecturesPiotr Kubaj2020-11-181-1/+2
* cad/verilator: Update 4.102 -> 4.104Yuri Victorovich2020-11-182-4/+4
* graphics/proj: Update to 7.1.1Loïc Bartoletti2020-11-171-1/+1
* misc/openvdb: Update 7.0.0 -> 7.1.0Yuri Victorovich2020-11-161-1/+1
* Remove a forgotten .bak file.Thierry Thomas2020-11-162-1/+1
* freecad: fix build with opencascade 7.5.0 after r555127Christoph Moench-Tegeder2020-11-1510-0/+400
* - Upgrade cad/opencascade to 7.5.0Thierry Thomas2020-11-1510-249/+679
* - Update to 6.2.2009.Stephen Montgomery-Smith2020-11-143-4/+5
* cad/PrusaSlicer: convert to USES=eigenLoïc Bartoletti2020-11-131-2/+1
* cad/iverilog: fix build on GCC architecturesPiotr Kubaj2020-11-121-1/+1
* Prefer graphics/ligvrsvg2-rust over graphics/librsvg2Tobias C. Berner2020-11-101-0/+1
* update kicad and it's libraries to 5.1.8Christoph Moench-Tegeder2020-11-0618-60/+48
* Update to the latest versions.Michael Reifenberger2020-11-0415-152/+623
* Mark BROKENAntoine Brodin2020-11-011-0/+1
* cad/py-cq-editor: Add devel/py-spyder dependencyLoïc Bartoletti2020-10-311-2/+3
* cad/horizon-eda: Update 1.2.1 -> 1.3.0Yuri Victorovich2020-10-313-13/+8
* cad/xcircuit: Update to 3.10.29Danilo Egea Gondolfo2020-10-302-4/+4
* cad/netgen-lvs: Update 1.5.156 -> 1.5.157Yuri Victorovich2020-10-262-4/+4
* cad/gtkwave: Update to 3.3.107Niclas Zeising2020-10-252-4/+4
* - Enforce JAVA_VERSION when launching javavm(1), otherwise the programAlexey Dokuchaev2020-10-232-4/+3
* cad/iverilog: Update to 11.0Niclas Zeising2020-10-225-105/+6
* cad/py-ezdxf: Update to 0.14.2Loïc Bartoletti2020-10-212-4/+4
* cad/alliance: replace transfig with fig2devKurt Jaeger2020-10-191-2/+2
* cad/verilator: Update 4.100 -> 4.102Yuri Victorovich2020-10-162-10/+4
* Fix DEPENDSAntoine Brodin2020-10-151-2/+2
* cad/netgen-lvs: Update 1.5.155 -> 1.5.156Yuri Victorovich2020-10-092-4/+4
* cad/librepcb: Update 0.1.4 -> 0.1.5Yuri Victorovich2020-10-062-10/+13
* Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5Loïc Bartoletti2020-10-054-3/+4
* update cad/kicad and it's libraries to 5.1.7Christoph Moench-Tegeder2020-09-3017-63/+390
* cad/veroroute: Update 1.99 -> 2.00Yuri Victorovich2020-09-292-4/+4
* This patch updates Cura and all associated dependencies to 4.7.1.Diane Bruce2020-09-2713-170/+959
* - Update to 6.2.2008.Stephen Montgomery-Smith2020-09-273-4/+6
* cad/spice: Fix build on 13Yuri Victorovich2020-09-251-0/+2
* cad/openroad: Temporarily broken on i386Yuri Victorovich2020-09-251-0/+2
* cad/calculix : update to version 2.17.1Pedro F. Giffuni2020-09-235-33/+14
* cad/calculix-ccx: Re-enable multithreading with spooles.Pedro F. Giffuni2020-09-233-3/+4
* cad/ktechlab: Update 0.40.1-77 -> 0.50.0Yuri Victorovich2020-09-216-45/+4
* cad/gmsh: Fix fetchNiclas Zeising2020-09-191-0/+1
* cad/openvsp: unexpire by allowing it to build on FreeBSD versions with PR 230...Rene Ladan2020-09-191-4/+1
* Also mark as not for powerpcspe.Mark Linimon2020-09-191-1/+1
* New port: cad/ecpprog: Driver for FTDI based JTAG probes, to program ECP5 FPGAsYuri Victorovich2020-09-164-0/+39
* cad/verilator: Add the run-tim dependency on gmakeYuri Victorovich2020-09-162-1/+8
* cad/verilator: Update 4.040 -> 4.100Yuri Victorovich2020-09-153-6/+4
* cad/qflow: Change dependency from cad/opensta to cad/openroadYuri Victorovich2020-09-151-1/+2
* cad/opensta: Remove because it is now included in OpenRoad (cad/openroad)Yuri Victorovich2020-09-157-207/+0
* cad/openroad: Remove several unnecessary elements from MakefileYuri Victorovich2020-09-151-3/+2
* New port: cad/openroad: ASIC physical design toolYuri Victorovich2020-09-1510-0/+351
* cad/opensta: Update g20200315 -> g20200907Yuri Victorovich2020-09-143-170/+125
* cad/gerbv: unbreak for llvm11 for nowKurt Jaeger2020-09-141-0/+1
* cad/qflow: Update 1.4.86 -> 1.4.87Yuri Victorovich2020-09-132-4/+4
* cad/gmsh: Update to 4.6.0Niclas Zeising2020-09-123-40/+101
* cad/verilator: Add options INSTALL_DBG_EXECUTABLES and LEAK_CHECKSYuri Victorovich2020-09-122-2/+13
* Try to fix ports build.Michael Reifenberger2020-09-111-2/+3
* Update to version 3.25.2.0Michael Reifenberger2020-09-114-23/+64
* Switch to the gitlab repo and update to 20200902162151Michael Reifenberger2020-09-095-36/+18
* cad/veroroute: Update 1.98 -> 1.99Yuri Victorovich2020-09-082-4/+4
* cad/digital: Update 0.24 -> 0.25Yuri Victorovich2020-09-062-6/+6
* cad/veroroute: Update 1.97 -> 1.98Yuri Victorovich2020-09-032-5/+9
* cad/leocad: Add the PORTSCOUT tagYuri Victorovich2020-09-031-0/+2
* cad/PrusaSlicer: Use USE_WX instead of the LIB_DEPENDS with the WX libraryYuri Victorovich2020-09-021-1/+1
* x11-toolkits/wxgtk31: Update 3.1.3 -> 3.1.4Yuri Victorovich2020-09-021-1/+1
* - Update to 0.24.8Nicola Vitale2020-09-014-10/+15
* cad/verilator: Add the SystemC dependencyYuri Victorovich2020-09-012-7/+5
* cad/verilator: Add the 'test' targetYuri Victorovich2020-09-011-1/+5
* Bump PORTREVISION for devel/protobuf shlib changeSunpoet Po-Chuan Hsieh2020-08-311-1/+1
* cad/openfpgaloader: fix build on GCC architecturesPiotr Kubaj2020-08-302-0/+26
* Extend expiration of ports broken with -fno-commonNiclas Zeising2020-08-302-6/+6
* cad/gmsh: Add -fcommon to fix buildNiclas Zeising2020-08-301-0/+1
* cat/varkon: fix build on current and deprecateTobias C. Berner2020-08-292-1/+18
* cad/transcalc: fix build on current and deprecateTobias C. Berner2020-08-291-0/+5
* cad/veroroute: Update 1.96 -> 1.97Yuri Victorovich2020-08-292-4/+4
* cad/atlc: fix build with recent currentTobias C. Berner2020-08-281-0/+11
* Update to version 6.4.2.Alexey Dokuchaev2020-08-232-4/+4
* cad/iverilog: Use upstream patch for -fno-commonNiclas Zeising2020-08-224-32/+37
* cad/netgen-lvs: Update 1.5.154 -> 1.5.155Yuri Victorovich2020-08-202-4/+4
* cad/calculix : update to version 2.17Pedro F. Giffuni2020-08-2011-61/+353
* cad/verilator: Update 4.038 -> 4.040Yuri Victorovich2020-08-192-5/+5
* cad/iverilog: Fix build with -fno-commonNiclas Zeising2020-08-193-0/+32
* Clean up some thingsTobias Kortkamp2020-08-181-0/+3
* Add compiler:c++11-lang to USES to fix build on GCC-based systems:Mark Linimon2020-08-181-1/+1
* Update to 0.52Mateusz Piotrowski2020-08-172-5/+4
* cad/py-cq-editor: create portSteve Wills2020-08-163-0/+40
* cad/py-cadquery: create portSteve Wills2020-08-164-0/+49
* cad/py-ocp: create portSteve Wills2020-08-166-0/+93
* devel/cmake: update to 3.18.1Tobias C. Berner2020-08-162-5/+14
* Update to 1.6 and add test target.Hiroki Sato2020-08-162-10/+32
* graphics/ilmbase, graphics/openexr: PORTREVISION bump for usersMatthias Andree2020-08-141-1/+1
* cad/gtkwave: update to 3.3.106Niclas Zeising2020-08-132-4/+4
* editors/emacs: Update to version 27.1Joseph Mingrone2020-08-132-2/+2
* New port: cad/openfpgaloader: Universal utility for programming FPGAYuri Victorovich2020-08-115-0/+49
* Update to version 0.11.Alexey Dokuchaev2020-08-083-6/+10
* New port: cad/horizon-eda: EDA package for printed circuit board designYuri Victorovich2020-08-076-0/+72
* cad/netgen-lvs: Update 1.5.153 -> 1.5.154Yuri Victorovich2020-08-052-4/+4
* cad/netgen-lvs: Update 1.5.150 -> 1.5.153Yuri Victorovich2020-08-032-4/+4
* [NEW PORT] cad/py-ezdxf: Create and modify DXF drawingsLoïc Bartoletti2020-07-314-0/+44
* cad/NASTRAN-95: mark brokenPedro F. Giffuni2020-07-312-3/+5
* cad/meshlab: fix build on GCC architecturesPiotr Kubaj2020-07-292-1/+11
* cad/qflow: Update 1.4.85 -> 1.4.86Yuri Victorovich2020-07-282-4/+4
* cad/netgen-lvs: Update 1.5.149 -> 1.5.150Yuri Victorovich2020-07-282-4/+4
* cad/alliance: Unbreak build with GCC 10 (-fno-common default)Tobias Kortkamp2020-07-272-3/+24
* Deprecate ports broken for more than 6 monthsAntoine Brodin2020-07-261-0/+2
* sympy-1.6 is no longer compatible with python 2.7Antoine Brodin2020-07-261-1/+1
* cad/gtkwave: Update to 3.3.105Niclas Zeising2020-07-262-4/+4
* The serial library returns 'n/a' to the port[2] string that Cura was checkingDiane Bruce2020-07-252-1/+15
* Lock these ports down to OpenJDK version 8, they do not build with neitherAlexey Dokuchaev2020-07-241-1/+1
* - Update to 6.2.2007.Stephen Montgomery-Smith2020-07-243-5/+6
* cad/freecad: fix for python 3.8Christoph Moench-Tegeder2020-07-232-1/+6
* Update to version 6.4.Alexey Dokuchaev2020-07-222-4/+4
* cad/caneda: fix build on GCC architecturesPiotr Kubaj2020-07-221-1/+2
* cad/nvc: Update 1.4.0-33 -> 1.5.0Yuri Victorovich2020-07-202-5/+4
* cad/qflow: Update 1.4.84 -> 1.4.85Yuri Victorovich2020-07-202-4/+4
* cad/verilator: Update 4.036 -> 4.038Yuri Victorovich2020-07-193-13/+13
* cad/meshlab: Resurrect, update to 2020.05 and take maintainer'shipLoïc Bartoletti2020-07-1810-0/+299
* Update devel/tbb to 2020.3 and bump dependent ports' revisionsGanael LAPLANCHE2020-07-172-2/+2
* openexr/ilmbase update w/ shlib rename => PORTREVISION bumps of dependent portsMatthias Andree2020-07-161-1/+1
* cad/qflow: Update 1.4.83 -> 1.4.84Yuri Victorovich2020-07-162-4/+4
* - Update to 3.10.28Danilo Egea Gondolfo2020-07-164-9/+18
* Honor $YACC and fix build with recent byacc.Jung-uk Kim2020-07-143-1/+21
* cad/ngspice_rework: fix build on GCC architecturesPiotr Kubaj2020-07-121-1/+1
* cad/verilator: Update 4.034 -> 4.036Yuri Victorovich2020-07-092-6/+6
* - Add LDFLAGS+= -lexecinfo so that python modules work.Stephen Montgomery-Smith2020-07-071-0/+2
* update pyside2 and friends to 5.15.0Christoph Moench-Tegeder2020-07-071-1/+1
* cad/netgen-lvs: Update 1.5.148 -> 1.5.149Yuri Victorovich2020-07-072-4/+4
* cad/graywolf: Mark as broken on aarch64: fails to link with sbrk.Mikael Urankar2020-07-051-0/+2
* Chanse update of devel/libffiNiclas Zeising2020-07-051-0/+1
* Mark as broken on aarch64: fails to link with sbrk.Mikael Urankar2020-07-041-0/+2
* - Update to version 6.3 and take maintainershipAlexey Dokuchaev2020-07-023-32/+30
* cad/NASTRAN-95: Unbreak build with GCC 10Tobias Kortkamp2020-06-281-0/+6
* Move devel/py-usb to devel/py-pyusbSunpoet Po-Chuan Hsieh2020-06-271-1/+2
* Move comms/py-serial to comms/py-pyserialSunpoet Po-Chuan Hsieh2020-06-271-2/+2
* cad/ngspice_rework: Update to 32Fernando Apesteguía2020-06-255-6/+78
* cad/ktechlab: : Prepare for Qt5.15Loïc Bartoletti2020-06-244-0/+40
* cad/qflow: Update 1.4.81 -> 1.4.83Yuri Victorovich2020-06-242-4/+4
* cad/freecad: Prepare for Qt5.1.5Loïc Bartoletti2020-06-231-0/+10
* cad/graywolf: Unbreak build with GCC 10 (-fno-common)Tobias Kortkamp2020-06-221-0/+2
* Drop ports maintainershipLorenzo Salvadore2020-06-211-1/+1
* - Update to 6.2.2006.Stephen Montgomery-Smith2020-06-202-4/+4
* cad/netgen-lvs: Update 1.5.147 -> 1.5.148Yuri Victorovich2020-06-192-4/+4
* Move devel/swig30 to devel/swig and update to 4.0.1Sunpoet Po-Chuan Hsieh2020-06-184-4/+4
* cad/qflow: Update 1.4.80 -> 1.4.81Yuri Victorovich2020-06-152-4/+4
* cad/veroroute: Update 1.94 -> 1.96Yuri Victorovich2020-06-152-4/+4
* Mark as ONLY_FOR x86: rdtsc() is not available on other archs:Mark Linimon2020-06-151-0/+3
* cad/gtkwave: Update to 3.3.104Niclas Zeising2020-06-142-4/+4
* Switch from mpich2 to mpich.Thierry Thomas2020-06-141-8/+2
* - Update to 6.2.2005.Stephen Montgomery-Smith2020-06-143-8/+30
* Remove BROKEN_i386 after the previous fix got verified.Michael Reifenberger2020-06-111-4/+0
* Try to fix i386 build.Michael Reifenberger2020-06-083-25/+53
* freecad: don't compress QResources for python codeChristoph Moench-Tegeder2020-06-082-2/+2
* cad/netgen-lvs: Update 1.5.146 -> 1.5.147Yuri Victorovich2020-06-062-4/+4
* cad/lepton-eda: Update to 1.9.11Fernando Apesteguía2020-06-055-68/+66
* - Fix build error caused by lack of py-pybind11 dependency. I decided toStephen Montgomery-Smith2020-06-051-1/+2
* Bump PORTREVISION for devel/protobuf shlib changeSunpoet Po-Chuan Hsieh2020-06-041-0/+1
* - Switch off superbuild in cmake. I did this because cmake seemed toStephen Montgomery-Smith2020-06-032-25/+3
* - Correct use of GH_* variables.Stephen Montgomery-Smith2020-06-031-3/+1
* For some reason, distinfo had a file listed twice. This caused make fetchStephen Montgomery-Smith2020-05-311-2/+0
* Update kicad-*devel to the latest changes.Michael Reifenberger2020-05-3115-118/+1297
* cad/digital: Update 0.22-250 -> 0.24Yuri Victorovich2020-05-302-7/+6
* cad/qcad: prepare for Qt5-5.15Loïc Bartoletti2020-05-301-0/+10
* Mark as BROKEN on powerpc64-12. It seems to build elsewhere (except mips,Mark Linimon2020-05-291-0/+2
* Sanitize COMMENT per Section 5.6 of the FreeBSD Porter's Handbook (part 1).Alexey Dokuchaev2020-05-272-2/+2
* - Update to 6.2.2004. This required a complete rewrite of the port.Stephen Montgomery-Smith2020-05-2622-708/+244
* Add compiler:c++11-lang to USES to fix build on GCC-based systems:Mark Linimon2020-05-261-1/+1
* Fix build with bison 3.6.2Sunpoet Po-Chuan Hsieh2020-05-261-0/+18
* Update to 0.24.7Nicola Vitale2020-05-252-5/+5
* cad/qrouter: Update 1.4.82 -> 1.4.83Yuri Victorovich2020-05-242-4/+4
* cad/verilator: Update 4.028 -> 4.034Yuri Victorovich2020-05-243-4/+15
generated by cgit (git 2.34.1) at 2025-02-19 19:52:12 +0800